WTD. 1000 Demister assy and H145 3.9:1

I had a heater fitted to my thou when I got it, unfinished and without all the origional parts to undo the conversion. I am happy to go without the heater so I would like to obtain all required parts to get it back to a povorty pack pleasure. That and I am going to fit some 3.9 gears into the thou in an alloy centre (sounds like a mars bar ad) to go highway cruising a bit better when I slot an A12 into it.

Any help would be greatly appreciated.

Cheers. Don.

What Don needs is a 1200 sedan diff(3.9)stocker

What did the stocker 1200 coupes have we have two coupe diffs one from a Manual and the other Auto.

Yeah Bert. I should have been more specific. I need a standard 1200 sedan or coupe H145 center. I only need the diff, not housing and axles etc. No need for that.

How much Andy? Bear in mind that I'm old and crippled and poor...

So you don't care if its from a manual or Auto coupe ? Or they the same anyway ? $50 including post and most of that's postage cause they aren't the lightest thing to pack and post.

I have a whole H145 diff assy you can have for nix if you take the lot away and bring back my TB's..

No idea on the condition of it..

Dean I still have the drawing here by the way. Let me know when you want it.

Yep, thanks Chris, have been pointed to a good fabricator so need to talk to him. Will be in touch once I get things sorted out..

I need one urgently too, as mine is a headache
from last datto cruise.

That would be lovely Deano. Although I have no idea how to obtain a nix. Sounds like a mythical creature of sorts. I have your tb's I my car already. Tell me when'd a good time to come over. Can you shoot me a number?

D, what went wrong? Gearbox or diff?

Also I should point out that I don't want a heater delisted assy. I only have the original flap for under the dash and want to get the cover and cable or whatever else it is I need to make it work as basic as possible.