hey guys,

According to tech wiki, one needs datsun 810 hubs to run fia mk63 or nismo mk63 calipers on b310 struts.any links to where one could purchase this hubs from?or which other hubs(preferrably from oz) one could use with b310 struts for this calipers? Also which other ventilated discs are other members using this calipers buying?

cheers

810 = 200b
not many mk63 callipers in aus. I nkow a guy who has new ones big $$$$.

worth more than the cars themselves :)

Aren't the alloy volvo 4-pucks just as good? put them on 280ZX/910 ventilated disks

Volvo calipers are cast iron
Mind you so are the 63's

Thanks for info guys.atleast now i know where to get hubs from.

Happened to buy some nismo mk63 calipers from jap that were kept as spares and never used for Ts Cup racing.I also already have some b310 coilovers with b110/120 upper pyros.Reason i gt this calipers is they are 4pot,periodic and can still run 13inch or 14inch rims.They should also stop well as they were used by works cars back in the day from 240zs to stanzas etc.im planning to run mine with nismo break pads when on track.

so any idea which ventilated discs to use? otherwise i'll just order some from a seller in jap who sells them but dearly.only read from one source that maybe 505gti discs but redrilled to suit stud pattern?

thanks for input guys.very appreciated!

Wouldn't be that much an upgrade over sumitomo 4 spots- off land cruisers etc.

I have 2 spots sumis and great on road and ok on hill climb bought a pair of 4 spots and crossdrilled slotted non vented rotors, apparently clear 13's too.

Will install them if I ever go rear disks too.