hi i was wandering if you convert an auto to manual what do you do to put in a clutch pedal do you change the whole thing with accelerator and brake from a manual car or are they same as auto and you just get a clutch pedal?

how does it get installed? does the brake pedal size change from auto to manual in a 120y?

brake pedal changes just cause the manual one is smaller pad

clutch just gets added also, cant remember if the pivot bar is interchangeable, i think so though, the auto one just has a spacer where the clutch should go

auto and manual pedal boxes are different in 120y's and there are 2 types of manual pedal boxes, with or without a booster .

so do i have to change the whole thing? from the wrkers do i remove every thing accelerator brake and clutch pedal

mine has a booster on it i think (black drum kind of thing near brake resivour)

are all these 3 pedals on one bracket plate that come out all together?

Thanks!

remove the whole thing
here's a pic of 120y pedal boxes the one on the left is no brake booster type

Yes, there were four different ones: Auto vs Manual X Boosted vs non-boosted

Manual pedal boxes have an extension welded on the left side. So they are not interchangable with Auto.

For B110, the pedal boxes are the same manual & auto.