I cant get to work on my datsun as regular as been in the past few weeks because of a serious situation here where i live,hope every thing turns back to normal soon.

But i still love my datsun with all my heart,here are a few pics guys!

Brakes upgrade i started to do finished but faliure.
Cash gone down the drain,i need help.

Pictures.



















All mounted up,would have swap the struts to the calipers would have been in the front.







Pleaseeeee help me out.

What's the failure?

With some brake conversions you need to swap the struts from drivers to passengers side so they don't hot steering arms.
This positions calipers at front of the car. But may require longer brake hoses.

I have longer hose's complete an ready an did swap the struts in the last time i took it down to try.The faluire is that i'm getting on the wheel but it will rub on the marked parts of the calipers in the pics below an if i continue to turn the wheel will stick in a postion.used spacers too,still the rim rubs.

Can you file downturn calipers a but for clearance. Sounds like it's the casting of the wheel too. Not all 13's clear them

YeA that sounds like it the rim has a big hump exactly where it rubs.what about the newer pulsar caliper on the 120y disc wiil i get better brakes than stock?

Some thing like this donno what calipers they are.

Show us your wheel. I had spacers made to fill in the dish . Now that hump is not a hump anymore.

Those are late model 1200 brakes. They fit inside 12" wheels:
* 1990-1995 1200 Sunny Truck
* 1986-2007 1400 Bakkie

See Photo 20076

Quote:

My little grocery Getter
The backs a wee bit to low although it have weight.