![[Datsun 1200 encyclopedia]](/wiki/upload/wiki.png)
| Revision as of 04:52, 19 November 2017 ddgonzal (Talk | contribs) (->Hood Ledge) <- Previous diff |
Revision as of 05:00, 19 November 2017 ddgonzal (Talk | contribs) Next diff -> |
||
| Line 1: | Line 1: | ||
| + | The exterior [[fenders]] bolt to the inner '''Hood Ledge''' pieces, which are welded to the chassis rails at the bottom. The rear if the ledges are welded to the [[Cowl]] and at the front to the radiator [[Core Support]], completeng the box-like structure of the front sheet metal (the [[Engine Bay]]). And as you might guess, the bonnet (hood) lies just above the top edges of the Hood Ledge. | ||
| + | |||
| = Part Numbers = | = Part Numbers = | ||
| == Fenders == | == Fenders == | ||
Revision as of 05:00, 19 November 2017
The exterior fenders bolt to the inner Hood Ledge pieces, which are welded to the chassis rails at the bottom. The rear if the ledges are welded to the Cowl and at the front to the radiator Core Support, completeng the box-like structure of the front sheet metal (the Engine Bay). And as you might guess, the bonnet (hood) lies just above the top edges of the Hood Ledge.
Part Numbers
Fenders
See main article: Fenders (guards, wings)
Hood Ledge
Ledge with Tower
Original * 64100-H1000 HOOD LEDGE ASS'Y (R.H.) * 64101-H1000 HOOD LEDGE ASS'Y (L.H.)
From 1271 * 64100-H3100 HOOD LEDGE ASS'Y (R.H.)
From 0772 * 64100-H7000 HOOD LEDGE ASS'Y (R.H.) * 64101-H7000 HOOD LEDGE ASS'Y (L.H.)
In these photos, you can see how the hoodledge panels (which incorporate the strut towers) form the sides of the engine compartment:
Reinforcement * 64118-H1000 REINF-HOODLEDGE,UPPER,RH (from '70-Sep) superceded 64120-H1000 REINF-HOODLEDGE,UPPER,RH * 64121-H1000 REINF-HOODLEDGE,UPPER,LH (from '70-Sep) superceded 64119-H1000 REINF-HOODLEDGE,UPPER,LH
Strut Towers are welded to the hood ledge (but sold as one piece, not taken apart like this)
12 - Hood Ledge Front_Body_Panels_Part_Numbers
