Front Fender and Front End

Revision as of 05:01, 19 November 2017; view current revision
<-Older revision | Newer revision->

The exterior fenders bolt to the inner Hood Ledge pieces, which are welded to the chassis rails at the bottom. The rear if the ledges are welded to the Cowl and at the front to the radiator Core Support, completing the box-like structure of the front sheet metal (the Engine Bay). And as you might guess, the bonnet (hood) lies just above the top edges of the Hood Ledge.

Part Numbers

Fenders

See main article: Fenders (guards, wings)

Hood Ledge

Ledge with Tower
Album 19189

Original
* 64100-H1000 HOOD LEDGE ASS'Y (R.H.)
* 64101-H1000 HOOD LEDGE ASS'Y (L.H.)

From 1271
* 64100-H3100 HOOD LEDGE ASS'Y (R.H.)

From 0772
* 64100-H7000 HOOD LEDGE ASS'Y (R.H.)
* 64101-H7000 HOOD LEDGE ASS'Y (L.H.)

In these photos, you can see how the hoodledge panels (which incorporate the strut towers) form the sides of the engine compartment:
Post 446905 Post 446905 Post 446905 Album 4665

Reinforcement
* 64118-H1000 REINF-HOODLEDGE,UPPER,RH (from '70-Sep)
  superceded 64120-H1000 REINF-HOODLEDGE,UPPER,RH
* 64121-H1000 REINF-HOODLEDGE,UPPER,LH (from '70-Sep)
  superceded 64119-H1000 REINF-HOODLEDGE,UPPER,LH

Upload click to view Album 6971 Album 6973

Strut Towers are welded to the hood ledge (but sold as one piece, not taken apart like this)
Album 19385

12 - Hood Ledge Front_Body_Panels_Part_Numbers