User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad


[Datsun 1200 encyclopedia]

Template:Diff ID

(Difference between revisions)

Datsun 1200 encyclopedia | Recent changes | Edit this page | Page history | Switch to MediaWiki mode

Printable version | Disclaimers | Privacy policy | Current revision

Revision as of 02:21, 15 February 2019
racer135 (Talk | contribs)
(->Flange)
<- Previous diff
Current revision
SunnyDaze (Talk | contribs)
(->Flange)
Line 3: Line 3:
<br>{{UploadPost|174_5a58324e15d6b.jpg|487206}} <br>{{UploadPost|174_5a58324e15d6b.jpg|487206}}
-[[H150]]: 45 x 54 mm round flange+[[H150]]: 45 x 54 mm round or rectangular flange
<br>[[H165]]: 45 x 54 mm round or rectangular flange <br>[[H165]]: 45 x 54 mm round or rectangular flange

Current revision

Contents

Flange

H145: scalloped flange, bolt hole rectangle 36 x 50 mm
174_5a58324e15d6b.jpgPost 487206

H150: 45 x 54 mm round or rectangular flange
H165: 45 x 54 mm round or rectangular flange

There are some differences between flanges on H165's, some long (~217.5mm from carrier mounting face to driveshaft flange face), some short (~202.5mm). Depth of hole for centering boss varies also.

H190: 50 x 60 mm, round or rectangular
174_56f08227124b3.jpgPost 477495 H190_510_Flange.jpg

Size

Measure the gear
25277.jpgAlbum 25277

H145 measures 145mm
H150 measures 150mm
H165 measures 165mm
H190 measures 190mm

Pre-1980

  B10: H145, 3.900 
 VB10: H145, 4.375 (van/wagon)
  B20: H145, 4.375 S.T.D. / 4.625 Optional (ute/pick-up)
 B110: H145 3.900
VB110: H145 4.111 (van/wagon)
PB110: H165 4.111
 B120: H165 4.111 (ute/truck)
 B210 1974: H145 3.900
 B210 1975-up: H150 3.700 or 3.889
PB210: H165
GB211: H165
 B310: H150 various
  A10: H165 various

1980-up

Axle Codes
H = Hitachi removable gear carrier (pumpkin/centre section)
HA - H145 (145mm diameter ring gear, 5.709 inch)
HB - H150 (150mm diameter ring gear, 5.906 inch)
HC - H165 (165mm diameter ring gear, 6.496 inch)
HD - H190 (190mm diameter ring gear, 7.480 inch) ALUMINUM CARRIER
HE - H190 CAST IRON CARRIER
HF - H190A revised for strength
EXAMPLE: HF38 = H190 with 3.889 ratio was factory fitted

Axle code is on Chassis Identification plate 1980-on, in the engine compartment. Starting in mid-80s, Axle Code is on door-jamb sticker.
21048.jpgAlbum 21048

Factory LSD has a sticker on the back of the diff housing.

Counting

To verify the ratio in the vehicle matches the original equipment (or build tag), you may count turns of the wheel vs turns of the driveshaft. If slightly less than 4 turns of the driveshaft results in one turn of the wheels, it is a 3.9 ratio. If it takes a bit more than 4 turns, it is a 4.111 ratio.

Even better is to note the stamped numbers on the ring gear. For example, this unit is stamped 39:11
24439.jpgAlbum 24439

39 divided by 11 = 3.545 ratio
25276.jpgAlbum 25276

Pinion gear is similarly stamped
25278.jpgAlbum 25278