| Portugal Nacional classic rally
 pitanando  Rally  2006/11/19 6:14  Tell a friend
 1535  0  0.00 (0 votes)
| The only dat1200 on the track |
|
| Portugal Nacional classic rally
pitanando Rally 2006/11/19 6:14 Tell a friend
1593 0 0.00 (0 votes)
| The only dat1200 on the track |
|
| Portugal Nacional classic rally
pitanando Rally 2006/11/19 6:13 Tell a friend
1634 0 0.00 (0 votes)
| The only dat1200 on the track |
|
| Portugal Nacional classic rally
pitanando Rally 2006/11/19 6:13 Tell a friend
1582 0 0.00 (0 votes)
| The only dat1200 on the track |
|
| Portugal Nacional classic rally
pitanando Rally 2006/11/19 6:08 Tell a friend
1535 0 0.00 (0 votes)
|
| Portugal Nacional classic rally
pitanando Rally 2006/11/19 6:00 Tell a friend
1912 1 0.00 (0 votes)
|
| Portugal Nacional classic rally
pitanando Rally 2006/11/19 5:58 Tell a friend
1615 0 0.00 (0 votes)
|
| POLICE NSX
Guest Misc 2006/11/18 21:34 Tell a friend
2002 1 0.00 (0 votes)
|
| left door
crzy_1200_ute Body and Interiors 2006/11/18 20:07 Tell a friend
2220 0 0.00 (0 votes)
|
| right hand door
crzy_1200_ute Body and Interiors 2006/11/18 20:04 Tell a friend
2073 0 0.00 (0 votes)
|
| Ian Ogilvie's Coupe at the Classic Adelaide 2
TnPshow TnPshow 2006/11/18 17:22 Tell a friend
1421 0 0.00 (0 votes)
|
| Ian Ogilvie's Coupe at the Classic Adelaide 1
TnPshow TnPshow 2006/11/18 17:19 Tell a friend
1524 0 0.00 (0 votes)
| Just about to enter the Chicane we were manning |
|
| alfa 33 wagon
DatA15 DatA15 2006/11/18 16:43 Tell a friend
2642 4 0.00 (0 votes)
car im trying to find at the moment. what yous think??
i like em |
|
| missing panel
crzy_1200_ute Body and Interiors 2006/11/18 16:04 Tell a friend
2704 2 0.00 (0 votes)
| My day of grinding out the panel for the new one this week |
|
| JIC struts
sunny Suspension 2006/11/18 12:30 Tell a friend
3114 0 0.00 (0 votes)
Does anyone know who services or sells JIC coilovers. I bought these knowing one needed service or replacing a shock. just needed to find out who does them.
any help appr. |
|
| body
FreaKerSea Body and Interiors 2006/11/17 18:38 Tell a friend
2261 1 0.00 (0 votes)
| the paintwork after a good polish, it scrubs up pretty well |
|
| black grille
FreaKerSea Body and Interiors 2006/11/17 18:36 Tell a friend
2222 0 0.00 (0 votes)
| i took the faded grey grille off and sprayed it black |
|
| more interior
FreaKerSea Body and Interiors 2006/11/17 18:35 Tell a friend
2596 2 0.00 (0 votes)
| the vinels suprisingly in good condition |
|
| steering wheel
FreaKerSea Body and Interiors 2006/11/17 18:33 Tell a friend
3703 0 0.00 (0 votes)
| not sure if this is the stock steering wheel for the 120y or if its come off a 180B or 200B |
|
| interior
FreaKerSea Body and Interiors 2006/11/17 18:32 Tell a friend
2132 0 0.00 (0 votes)
| the interior after ripping off 5 layers of sheep skin seat covers |
|
| engine again
FreaKerSea Engine 2006/11/17 18:31 Tell a friend
3229 4 0.00 (0 votes)
| new coil, leads, plugs, fuel filter, oil filter, head gasket, intake/exhaust gasket, weber 32/36 slap of new paint here and there and alot of degreaser |
|
| engine bay half way through
FreaKerSea Engine 2006/11/17 18:29 Tell a friend
2542 0 0.00 (0 votes)
|
| new carby/old carby
FreaKerSea Engine 2006/11/17 18:23 Tell a friend
3704 2 0.00 (0 votes)
| ripped the old carby off, bout to put on the 32/36 |
|
| another engine bay shot
FreaKerSea Engine 2006/11/17 18:21 Tell a friend
2032 0 0.00 (0 votes)
|
| another body shot
FreaKerSea Body and Interiors 2006/11/17 18:19 Tell a friend
1975 0 0.00 (0 votes)
|
| the car just after purchase
FreaKerSea Body and Interiors 2006/11/17 18:17 Tell a friend
1814 0 0.00 (0 votes)
| this is the body, bit of rust here and there nothing too bad |
|
| engine before shot
FreaKerSea Engine 2006/11/17 18:08 Tell a friend
1993 0 0.00 (0 votes)
this is the engine when i first bought the car
|
|
| anti tramp bars
PIGDOG PIGDOG 2006/11/17 17:14 Tell a friend
6411 16 0.00 (0 votes)
| mounted, shows adjustment |
|
| anti tramp bars
PIGDOG PIGDOG 2006/11/17 17:13 Tell a friend
2320 0 0.00 (0 votes)
|
| anti tramp bars
PIGDOG PIGDOG 2006/11/17 17:11 Tell a friend
2596 0 0.00 (0 votes)
|
| anti tramp bars
PIGDOG PIGDOG 2006/11/17 17:09 Tell a friend
2689 2 0.00 (0 votes)
| antitramp/traction barsi made |
|
| gx
DatsunSSS Tech Section 2006/11/17 3:48 Tell a friend
2020 0 0.00 (0 votes)
my gx have one number casted.
|
|
| gx
DatsunSSS Tech Section 2006/11/17 3:47 Tell a friend
1913 0 0.00 (0 votes)
gx after glass blasting,
amazing |
|
| gx
DatsunSSS Tech Section 2006/11/17 3:46 Tell a friend
2046 4 0.00 (0 votes)
gx after glass blasting,
amazing |
|
| my motor
datsunny Misc 2006/11/16 16:56 Tell a friend
2200 5 0.00 (0 votes)
| A15, twin 40 dellorto, extractors, recon block and head... |
|
| promise breaker
PIGDOG PIGDOG 2006/11/16 13:50 Tell a friend
4611 30 0.00 (0 votes)
| sorry guys i slipped while carrying it around |
|
| nothing to do with any thing
PIGDOG PIGDOG 2006/11/16 12:49 Tell a friend
2092 9 0.00 (0 votes)
i promise its not getting fitted to a datto  |
|
| My wheels
kululadotgroen Misc 2006/11/15 21:08 Tell a friend
1696 1 0.00 (0 votes)
| The wheels I bought for my car... |
|
| Diff Flange
banto Forum 2006/11/15 20:47 Tell a friend
1610 1 0.00 (0 votes)
|
| layin sill
PIGDOG PIGDOG 2006/11/15 20:07 Tell a friend
2089 6 0.00 (0 votes)
| the reason for re engineering the rear end |
|
| 1200 ute IRS
PIGDOG PIGDOG 2006/11/15 19:20 Tell a friend
3649 5 0.00 (0 votes)
|
| awesome body kit
Datsfullysik Datsfullysik 2006/11/14 19:11 Tell a friend
2084 10 0.00 (0 votes)
| awesome body kit god i love this car |
|
| mags
Datsfullysik Misc 2006/11/14 18:36 Tell a friend
1677 1 0.00 (0 votes)
|
| My Rustsun
Avengeance Misc 2006/11/14 17:18 Tell a friend
1767 3 0.00 (0 votes)
|
| My Rustsun
Avengeance Misc 2006/11/14 17:16 Tell a friend
1934 7 0.00 (0 votes)
|
| My Rustsun
Avengeance Misc 2006/11/14 17:15 Tell a friend
1723 1 0.00 (0 votes)
|
| My Rustsun
Avengeance Misc 2006/11/14 17:10 Tell a friend
1707 2 0.00 (0 votes)
|
| My Rustsun
Avengeance Misc 2006/11/14 17:08 Tell a friend
1952 5 0.00 (0 votes)
| Working on the rust on my Datsun |
|
| my son the drifter and future datto racer
Rallytwit Racing 2006/11/14 10:12 Tell a friend
3392 6 0.00 (0 votes)
OK we were taking drifting so this is my 12yr old son at a recent autocross......he's hooked by driving sideways.
Tom |
|
| SANITORA(SUNNY TRUCK)
sunny_coupe110 Mechanical 2006/11/14 8:31 Tell a friend
4887 5 0.00 (0 votes)
|
| Flairs only example pic
Datsfullysik Datsfullysik 2006/11/14 6:53 Tell a friend
1187 0 0.00 (0 votes)
| only to be used as an example pic, mine are exactly the same, only four two front and two back |
|
| Subs in the lancer
Datsfullysik Datsfullysik 2006/11/14 6:42 Tell a friend
1292 0 0.00 (0 votes)
| this is how well the custom box fitted made by Qmax |
|
| A15 Engine DIFF LOCKED
FAZPIOES Drive Train 2006/11/14 5:46 Tell a friend
1957 0 0.00 (0 votes)
| Sattelites on Diff are Welded - The Cheaper way of getting an 100% efficient Diff Locker for Spinning |
|
| SILVIA 1.8 Turbo
FAZPIOES Body and Interiors 2006/11/14 5:14 Tell a friend
2185 0 0.00 (0 votes)
|
| Bodywork all done raer quarter view
kululadotgroen Misc 2006/11/13 19:32 Tell a friend
1629 0 0.00 (0 votes)
Mmmmmm, and the sexy'est'est angle of a 1200, and possibly any car for that matter. Shake it...
Now I only have to find the rear window rubber, they damaged the old one when they took it out, but it was also crumbling in places anyway. I had them shave the boot lock for me, as I will be implanting some solenoid or cable system to open it up. I want to try and replace the springs that open the boot with those little shocks all the new car have. This will also be attempted with the bonnet. |
|
| Bodywork all done front quarter view
kululadotgroen Misc 2006/11/13 19:21 Tell a friend
1925 4 0.00 (0 votes)
The a-frame bolts into the original bumper holes, I just drilled them out to except larger high tensile bolts, which will also be used to bolt the bumper back on. They did an excellent job of blending the spoiler into the fenders. I also got new chrome beading that goes onto the fenders by the lights.
On the way home I had a new windscreen fitted. The lady said they didn't sell these old windscreens anymore, and also didn't want to believe me that the 1400 UTE's(which is still made and sold over here) windscreen fits. Only after they took one out and fitted it did she believe me... |
|
| Bodywork all done front
kululadotgroen Misc 2006/11/13 19:13 Tell a friend
1625 0 0.00 (0 votes)
Hey, is looking nice... They did an excelent job of fixing up all of the rust, and the colour is stunning. I built the a-frame myself, and it works a charm. Snuck through the back roads to get it there and home again... |
|
| BLCC Hillclimb Championships Nov 3,4,5, 2006
evilsim Racing 2006/11/13 18:51 Tell a friend
3445 6 0.00 (0 votes)
| pictures I took in Bathurst, Mt Panorama for the weekend. great event, highly recommended! greetz to the datsun racers who were there and those running A series motors ! if you own one of the cars shown, PM me and ill send you high res pics/videos of your beast in action. |
|
| Intake manifold taking shape some more
kululadotgroen Misc 2006/11/13 18:33 Tell a friend
1715 0 0.00 (0 votes)
Here you can see the angles involved. Unfortunately number 1 and 2 cylinders' gasses will have to make a slight turn when entering the ports, but fortunately the gasses will also hit these ports head on, so that should help a little. Big ports anyway, so it shouldn't make a difference.Top right you can see what I mean by the ports being hit directly.
Bottom left is the back of the plenum..duh and bottom right shows that front...double duh. However, this little AL plate was also the most difficult to make, as the angled part of the plenum makes a rounding here, but where it meets the intake port, it's flat. I first tried to hammer a piece of the AL pipe to fit, bit that broke with about the second blow. Then tried a piece of AL plate, which lasted about 10 knocks before breaking.
I then had a bit of liquid bread, to get the patience levels up if you know what I mean, and took about 30 minutes shaping another piece of AL plate to fit. The rest was just sawing at the right angles.
Had it al welded up at a local engineering shop, still don't know how much it'll cost, because I still have to make the throttle mounting plate and have it welded as well. |
|
| Intake manifold taking shape
kululadotgroen Misc 2006/11/13 18:09 Tell a friend
1896 0 0.00 (0 votes)
Hi sorry for posting pics of a Toyota engine on here, but that's also unfortunately what will be transplanted into my 1200.
I decided that the guys that build the intakes, they use the old SC intake anyway, charge far to much, and started doing it myself. I had the intake cut of about 40mm from the surface of the flange, and had this 101x4mm plenum welded to it. Then cut the backside at an angle to fit past the brakebooster, and made that plate.
The front was a little more tricky, as the piece that comes out at an angle wasn't cut at an angle to fit the rest of the plenum, but was hammered to more or less follow the oval shape created by the angle cut. |
|
| Preparation of bodywork engine compartment
kululadotgroen Misc 2006/11/13 17:58 Tell a friend
1585 0 0.00 (0 votes)
| It won't be this empty for much longer... |
|
| Preparation of bodywork sideview
kululadotgroen Misc 2006/11/13 17:56 Tell a friend
1531 0 0.00 (0 votes)
These guys aren't very safety conscious, when I arrived to see what they've been up to, they actually had the front of the car on the drum. they did this to do the rubberizing under the car. In the time it took me to run out and fetch my camera, they let the front down, and picked the back up. This was done by 3 guys, one on each side to pick up, and one to move the drum. I took the pics, and got out of there before the car could fall on somebody, and I was somehow held responsible.
Now I'm seriously starting to think about having some more weight over the rear wheels to get more grip... |
|
| Preparation of bodywork frontquarter
kululadotgroen Misc 2006/11/13 17:45 Tell a friend
1546 0 0.00 (0 votes)
I bought new UTE fenders, and they were fitted. You can also see the spoiler here I had fitted here, may help a little with undercar turbulance...
The packet on the radiator cradle is the bonnet latches, the intercooler sits right where the old catch was, and interferes with the catch when closing |
|
| Cut A12 head 2
ang94541 Engine 2006/11/13 8:18 Tell a friend
2489 0 0.00 (0 votes)
| Anther angle on the little piece |
|
| Cut A12 head
ang94541 Engine 2006/11/13 8:13 Tell a friend
2462 1 0.00 (0 votes)
|
| Sunny Parts Brochure
matbighat matbighat 2006/11/13 7:21 Tell a friend
1829 2 0.00 (0 votes)
|
| DATSUN HQ circa 1973
matbighat matbighat 2006/11/13 7:20 Tell a friend
1715 6 0.00 (0 votes)
| still from gone in 60 seconds |
|
| R31 Skyline clutch pedal - Engine bay
Coops Coops 2006/11/13 6:12 Tell a friend
2338 0 0.00 (0 votes)
I prefered this alloy type to the plastic ones.
It's a bit tight with the CA in, but all that's needed is to re-rout the turbo cooling slightly. |
|
| R31 Skyline - Hydraulic clutch pedal conversion
Coops Coops 2006/11/13 6:10 Tell a friend
3575 0 0.00 (0 votes)
Used a holesaw to locate the hole in the firewall.
Needed to brace against the steering column for ridgidity. |
|
| R31 diff mount / lowering block - Another angle
Coops Coops 2006/11/13 6:08 Tell a friend
2444 0 0.00 (0 votes)
Yet to set the pinion angle.
Waiting till all the weights in the car to make sure it's right. |
|
| Battery box mounting
Coops Coops 2006/11/13 6:06 Tell a friend
2094 0 0.00 (0 votes)
Had to stick behind the firewall - No room in the engine bay w/ the CA18.
The old fuel tank recess was the perfect spot. |
|
| R31 Skyline handbrake setup 2
Coops Coops 2006/11/13 5:58 Tell a friend
1891 0 0.00 (0 votes)
Had to get the shortened & lengthened respectively, then milled a section out of some 25 x 25 angle (shown) to take the cable mountings.
Welded to diff as close as possible to the centre. |
|
| 1200 / R31 Skyline handbrake setup
Coops Coops 2006/11/13 5:56 Tell a friend
2671 1 0.00 (0 votes)
Pocketed the R31 pulley thing, cut the bracket off & drilled to suit the 1200 adjustment bracket.
Works well, but a bit close to the battery box. |
|
| R31 tank - Rear view
Coops Coops 2006/11/13 5:53 Tell a friend
1966 6 0.00 (0 votes)
| Sits pretty well I reckon. |
|
| R31 Skyline fuel tank mounting LH
Coops Coops 2006/11/13 5:52 Tell a friend
1847 0 0.00 (0 votes)
Only problem here is where the dip in the tray cross member is to allow for the original exhaust routing.
Just a matter of cutting the right size piece of steel & weling a bracket. |
|
| R31 Skyline Fuel Tank mounting RH
Coops Coops 2006/11/13 5:50 Tell a friend
1915 0 0.00 (0 votes)
Fits like it was made for it.
Just needed to cut the middle tray cross member a bit & drill holes + weld in the 25 x 50 RHS |
|
| R31 Diff Mount / Lowering Block
Coops Coops 2006/11/13 5:45 Tell a friend
2803 0 0.00 (0 votes)
50 x 75 RHS.
160mm long in an effort to reduce axle tramp - Also has a lowering effect by flattening out the spring a bit. |
|
| exhaust flange...........
3Rotor Engine 2006/11/12 20:34 Tell a friend
2441 2 0.00 (0 votes)
|
| my mirrors
Datsfullysik Datsfullysik 2006/11/12 18:51 Tell a friend
1603 0 0.00 (0 votes)
|
| front on old grill
Datsfullysik Datsfullysik 2006/11/12 18:50 Tell a friend
1464 1 0.00 (0 votes)
| bought new one, just needs to be resprayed |
|
| my globes
Datsfullysik Datsfullysik 2006/11/12 18:49 Tell a friend
1355 0 0.00 (0 votes)
| need a bit of a clean lol |
|
| new tip
Datsfullysik Datsfullysik 2006/11/12 18:43 Tell a friend
1344 3 0.00 (0 votes)
|
| My new exhaust tip
Datsfullysik Datsfullysik 2006/11/12 18:41 Tell a friend
1178 0 0.00 (0 votes)
|
| picture of interior
possum1200 Misc 2006/11/12 15:59 Tell a friend
1556 3 0.00 (0 votes)
| an overall shot of my interior. will be purchasing 2 more autometer gauges this coming sunday and mount them up the a pillar |
|
| picture of fresh interior
possum1200 Misc 2006/11/12 15:57 Tell a friend
1531 0 0.00 (0 votes)
| just installed my fibreglass kick panels (thanks 120fly) |
|
| picture of freshly painted dash
possum1200 Misc 2006/11/12 15:56 Tell a friend
1511 0 0.00 (0 votes)
| just installed my dash after giving it a coat of paint (now i just need to get my gauges working lol) |
|
| side of zed
pepper pepper 2006/11/12 15:37 Tell a friend
1609 1 0.00 (0 votes)
| newly regoed, blast to drive again |
|
| blackzfront
pepper pepper 2006/11/12 15:34 Tell a friend
1834 2 0.00 (0 votes)
|
| enigine bay pic
trb012 trb012 2006/11/12 12:30 Tell a friend
3003 4 0.00 (0 votes)
| My finished engine bay still needs s good clean but |
|
| my datsun
datsuntwinturbo Racing 2006/11/12 10:07 Tell a friend
2672 2 0.00 (0 votes)
| the motor and intercooller |
|
| my datsun
datsuntwinturbo Racing 2006/11/12 10:02 Tell a friend
2325 0 0.00 (0 votes)
|
| my datsun
datsuntwinturbo Racing 2006/11/12 10:01 Tell a friend
2386 0 0.00 (0 votes)
| fanelly the motor is in the car |
|
| steering wheel
Datsfullysik Datsfullysik 2006/11/11 14:32 Tell a friend
1160 0 0.00 (0 votes)
|
| subs
Datsfullysik Datsfullysik 2006/11/11 13:52 Tell a friend
1241 0 0.00 (0 votes)
|
| Portugal Classic Raly
pitanando Rally 2006/11/11 7:17 Tell a friend
2046 7 0.00 (0 votes)
|
| Portugal Classic Raly
pitanando Rally 2006/11/11 7:16 Tell a friend
1782 0 0.00 (0 votes)
|
| Portugal Classic Raly
pitanando Rally 2006/11/11 7:15 Tell a friend
1849 2 0.00 (0 votes)
|
| Portugal Classic Raly
pitanando Rally 2006/11/11 7:14 Tell a friend
1799 0 0.00 (0 votes)
|
| 12OOU = New chassis rails, no tray
12OOU 12OOU 2006/11/10 19:41 Tell a friend
5367 14 0.00 (0 votes)
| More of the rear end setup. |
|
| 12OOU = Sittin low on big wheels :)
12OOU 12OOU 2006/11/10 19:00 Tell a friend
4227 22 0.00 (0 votes)
| Heres a progress pic of what my ute is looking like with the new rear setup. |
|
