[< Previous 45 46 47 48 49 50 51 Next >]
L series firewall clearance
 L18_B110  2003/3/24 7:28  Tell a friend
 3225  2  0.00 (0 votes)
| minor reshaping required where the firewall meets the trans tunnel. Also shows clutch master cylinder location. the adjacent brake splitter block was simply spaced out from the firwall to clear the clutch master cyl. |
|
|
[< Previous 45 46 47 48 49 50 51 Next >]
The comments are owned by the poster. We aren't responsible for their content.
| Poster |
Thread |
| dattodude |
Posted: 2003/3/24 12:02 Updated: 2003/3/24 12:02 |
No life (a.k.a. DattoMaster)   Joined: 1998/12/6 From: Sydney, Australia Posts: 5806 |
 Re: L series firewall clearance That's a 180B Clutch Master Cylinder. I used one of those on my first CA18/1200 install.
Chris
|
|
|
|
| Poster |
Thread |
| L18_B110 |
Posted: 2003/3/24 22:42 Updated: 2003/3/24 22:42 |
No life (a.k.a. DattoMaster)  Joined: 2002/8/6 From: Brisbane, Australia Posts: 3792 |
Re: L series firewall clearance it's actually a Stanza cylinder, but wouldn't surprise me if it was the same part
|
|
|
|
Members
L18_B110