Thanks for the encouragement guys. Just waiting to finally crack and buy a tomei oil block so I can plan oil cooler set up. Was thinking of setting up bozuku style external cooler and neat 2nd one behind grill. Have some awesome jiffytite fittings I can use that quick release....

Hmmmmmmm ( see sig )

Any findings on relocating the wiper motor?

Ok so got a bit done today. After a couple of thousand measurements and cutting once i fitted wiper motor on the inside of the cabin. Relatively easy actually.Glove box requires no mods and dash fascia covers all evidence.

Finished of trans tunnel with stitch weld then grinded back smooth and laid a bead of sikaflex around the seam.

Being that everything was going along well I drilled out spot weld for handbrake reinforcement and relocated it further back to go with new console set up.

Took out oem radio and gave it a good clean, came up awesome! also found a place in the US that ads new inners and a usb cable! So Millennium Falcon!

heres pics

Attach file:

---

  wipermotor1.jpg (49.65 KB)


  wipermotor2.jpg (53.15 KB)


  handbrake1.jpg (57.42 KB)


  handbrake.jpg (53.22 KB)


  gboxmountnew.jpg (54.50 KB)


  dasboardcentre.jpg (58.02 KB)


  clarionoldschool.jpg (48.08 KB)

did you do the silvia wiper motor replace ment at the same time? perfect opportunity like the b110's and b10

Ok no, but, would I be doing this for motor life/ replacement later or multiple speed? I've had a think maybe I could use this motor with head light style multi position pull switch for different speeds? Forgive me if I've been on the moon.

looking good K ... I need to get up for a look soon!

Had lots of time organising and reorganising. Built plate for relays fuses and computer just working on how to mount to firewall, working on heater lines from Nissan to datsun. Radiator is driving me crazy! Sizing and looks keep delaying my decision. Got all lines done for oil cooler. Spent a lot of time on pedal box for tilton set up to find it will not pass engineering being that no balance allowed in street reg'd car. So it may or may not find it's way in later.

Tried a couple of different seats but none so far are a hit. Think I'll reupholster oem seat in prince skyline style theme.

Anywho pics to follow

2nd time round idea, first i had the whole panel as one and planned to mount it on the firewall, didnt really like the look. Rehashed the idea, this way cable is perfect length for computer to sit under the seat out of the way. Just have to finish making bottom plate to mount it on.

Diagnostic plugs sits neatly in opening, just had to make one for the loom to go through

Also managed to get one Excellent GX badge, something tells me im pushing poo up hill finding another!

Radiator will hopefully be ready this week, getting anci to pull it back on the roto so i can paint the underside

Attach file:

---

  excellent.jpg (44.43 KB)


  relayfuse.jpg (55.22 KB)


  comp.jpg (56.34 KB)


  fusecomprelay.jpg (46.02 KB)

I can't believe the progress on this thing. Will be hard to have to pull it apart again to lay some jam on it. Maybe leave the body as is? hehe

where can i get this visor?