14x7 +1 on the front 14x6.5 +8 on the rear migth sound weird but yes wider ones up front and had to use a 5mm spacer up front. cant uses 13 inches wheels cause my brakes are the bigger ones from a turbo s13 but didnt have problems with steering arms.... im working to get a camera soon :P did a trip yesterday and came home today 7 galons of fuel and 400+ kilometers feels good but a little tight on the rear end i think i will have to remove the last leaf

and please can you show me pictures of your 20y bar installed from everywhere damn it was hell for me to install mine and want to compare

No Problem Dude.Did you get the bar from b210 because the b310 cannot fit.Make sure u get the same u clamps an rubbers from the b210.Later on i put teflon bushings Pictures......

Attach file:

---

  DSC01462-1.jpg (172.01 KB)


  DSC01473.jpg (179.58 KB)


  DSC01472.jpg (190.37 KB)


  DSC01482.jpg (104.43 KB)


  DSC01483.jpg (163.76 KB)

well from what i see my u clamps are different but the sway bar looks the same thank you darren :)

The B210 bush clamps are the same as B110/B120, but the bush rubbers are different (bigger holes for the bigger bar)

i had to use b310 clamps turned arround :S

I just removed my yesterday. Really dont need it for drag racing.
Whst i did to fit mine around the KA motor was I just cut added material and extended it forward out in front. It stuck out in front of the frame so I positioned it down before welding. That way, when the car is jacked up, the bar rises up just below the frame. Worked well.

Strut top plates installed.

I'M backk!

Attach file:

---

  SAM_2415.JPG (188.22 KB)

a trip to the sea shore?

Keep on trucking.