Hey guys just wanting to know how would i go about fitting some brembo disc & calipers to a 1200 coupe? would any bolt straight up like say silvia brakes

i'm abit puzzled on this so help would be good

Cheers

You might get lucky by using stanza (A10) lower arms, with Skyline R31 struts and some Brembo discs/calipers from a R33 Skyline.

Its not easy, and the expense involved in getting it wrong is to high for me to consider.

It's not worth it either. Only good for a slight increase in "pimp" status.

the best bet is to use a datsport strut.

they do a number of different combnations the best one has a coilover strut with 4 pot r32 gts-t calipers and 296mm ebc rotors.

they cost about $2950.

i thing brembos would be a bit over the top

you can see them more at www.datsport.com

datsport is in Adelaide and i know you are in new zealand so doing this could be a bit to hard,just an idea

Cheers for your help guys, only reason for sum brembo's is tht i'm building my coupe up from scratch and want every thing done right and perfectly

Also Errol does a great setup, check it out.

http://www.datrats.com.au/BRAKES.html

brembos are much more than perfect.
It's overkill. Unless you plan on going down a steep 300km hill while carrying 2 rhinos and 2 baby elephants and a wild boar in your datto.

Remember there are many dimensions to brake selection:

1. Initial Cost
2. Stopping Performance
3. Ongoing costs for consumables
4. Looks
5. Fit for wheel clearance
6. Unsprung weight vs. ride comfort.

Everything done perfect would empty a billionaire's bank account. Get a budget, divide up the expenses, and get the project finished!

Talk to a fellow NZ racer, and follow their suggestions.

Cheers.

Don't be silly dattodude you can't fit a rhino in a 1200 coupe let alone a wild boar, also just like to add that i was offered a set of brembo's off a subaru wrx at a real good price and an idea just came into my head but cheers any way.

If your getting the Brembos at a really good price maybe it isnt such a bad idea to try,you will have something nobody else has.
Will the wheels you want fit over the Brembos?
I have heard of Subaru Leone discs on a 1000 coupe so it could be possible.
It could involve a fair bit of stuffing about and you would have to fabricate some brackets for the caliper, but if you know someone cluey and good on a lathe, its worth a try.
anything can be done if you put your mind to it.