Hi does any one have one of these that they want to sell. I want a spare! Thanks

Sorry cant help but make sure you get the one with the short plunger. The long plunger ones look very similar but you would end up with the rev light on in any forward gear

i might have one here for you !!

ill check tommorrow
cheers

yeah i wouldnt mind a working one too, mine doesnt work any more and long one wont go in the tunnel

I have a gearbox attached to one :). $50 lol.

Thanks weekend1000 for the advice. I noticed that the 60 series switch is longer. I will need one of them too when i decide to put that gear box back together.

Or you can fabricate a bracket with a "momentery switch" attached so that when you put in reverse the switch is activated ( gear lever activates/presses on the switch when in reverse)
Thats what I'm going to do and its easy.

not a bad idea levey, would be way easier with the dog leg too.

No worries DJF
from what I have seen

short plunger is for all 56 4 speed and STD pattern 60 5 speed gearbox reverse switches

long plunger is for dogleg 60 5 speed rev switch and
top gear (4th) indicating switch on 60 4 speeds

I have pulled an extension housing off a 5 speed and it looks like a fairly simple task to drill and tap from the rear thus getting around the old "60 5 speed into a 1000/1200 problem". Leveys approach sounds easier!

Yeah you are 100% right the 56 4 speed switch works in the 60 series H pattern 5 speed.I have both these boxes as well as a 60 series 4 speed so now im thinking about the gear stick switch as well. so lets how we go, Thanks everyone