![[Datsun 1200 encyclopedia]](/wiki/upload/wiki.png)
| Revision as of 23:01, 17 May 2018 ddgonzal (Talk | contribs) <- Previous diff |
Revision as of 00:19, 19 November 2018 ddgonzal (Talk | contribs) Next diff -> |
||
| Line 1: | Line 1: | ||
| The exterior [[fenders]] bolt to the inner '''[[Front_Fender_and_Front_End#Hood_Ledge|Hood Ledge]]''' pieces, which are welded to the chassis rails at the bottom. The rear if the ledges are welded to the [[Cowl]] and at the front to the radiator [[Core Support]], completing the box-like structure of the front sheet metal (the [[Engine Bay]]). And as you might guess, the [[bonnet]] (hood) lies just above the top edges of the Hood Ledge. | The exterior [[fenders]] bolt to the inner '''[[Front_Fender_and_Front_End#Hood_Ledge|Hood Ledge]]''' pieces, which are welded to the chassis rails at the bottom. The rear if the ledges are welded to the [[Cowl]] and at the front to the radiator [[Core Support]], completing the box-like structure of the front sheet metal (the [[Engine Bay]]). And as you might guess, the [[bonnet]] (hood) lies just above the top edges of the Hood Ledge. | ||
| - | = Part Numbers = | + | = Fenders = |
| - | == Fenders == | + | guards, wings |
| - | See main article: [[Fenders]] (guards, wings) | + | |
| - | {{ThumbH!|3245}} {{ThumbH!|15977}} {{ThumbH!|13594}} | + | {{Main|Fenders}} |
| + | |||
| + | {{AlbumH!|3245}} {{AlbumH!|15977}} {{AlbumH!|13594}} | ||
| + | |||
| + | = Hood Ledge = | ||
| + | Ledge with Tower | 12 - Hood Ledge [[Front Body Panels Part Numbers]] | ||
| + | <br>{{Album|19189|jpg|400}} {{Photo!|863A-01a.jpg|Datsun%201200/1971}} | ||
| - | == Hood Ledge == | ||
| - | Ledge with Tower | ||
| - | <br>{{Album|19189}} | ||
| Original | Original | ||
| Line 23: | Line 25: | ||
| In these photos, you can see how the hoodledge panels (which incorporate the strut towers) form the sides of the engine compartment: | In these photos, you can see how the hoodledge panels (which incorporate the strut towers) form the sides of the engine compartment: | ||
| - | <br>{{UploadPost|8710_5275fd7fa0a55.jpg|446905}} {{UploadPost|8710_5275fe0d69a23.jpg|446905}} {{UploadPost|8710_5275fd738449d.jpg|446905}} {{Album|4665}} | + | <br>{{UploadPost|8710_5275fe0d69a23.jpg|446905}} {{UploadPost|8710_5275fd7fa0a55.jpg|446905}} {{UploadPost|8710_5275fd738449d.jpg|446905}} {{Album|4665}} |
| - | Reinforcement | + | [[Strut]] Towers are welded to the hood ledge (but sold as one piece, not taken apart like this) |
| + | <br>{{Album|19385}} | ||
| + | |||
| + | = Hood Ledge Reinforcement = | ||
| * 64118-H1000 REINF-HOODLEDGE,UPPER,RH (from '70-Sep) | * 64118-H1000 REINF-HOODLEDGE,UPPER,RH (from '70-Sep) | ||
| superceded 64120-H1000 REINF-HOODLEDGE,UPPER,RH | superceded 64120-H1000 REINF-HOODLEDGE,UPPER,RH | ||
| * 64121-H1000 REINF-HOODLEDGE,UPPER,LH (from '70-Sep) | * 64121-H1000 REINF-HOODLEDGE,UPPER,LH (from '70-Sep) | ||
| superceded 64119-H1000 REINF-HOODLEDGE,UPPER,LH | superceded 64119-H1000 REINF-HOODLEDGE,UPPER,LH | ||
| - | {{Upload|10257_4df73b9b04ed3.jpg}} {{Album|6971}} {{Album|6973}} | + | {{Upload|10257_4df73b9b04ed3.jpg}} {{Album|6971}} {{Album|6973}} {{UploadPost|13022_4e3e72d8d856c.jpg|378850}} {{UploadPost|13022_4e3e72e5d1af6.jpg|378850}} |
| - | + | ||
| - | Strut Towers are welded to the hood ledge (but sold as one piece, not taken apart like this) | + | |
| - | <br>{{Album|19385}} | + | |
| - | 12 - Hood Ledge [[Front_Body_Panels_Part_Numbers]] | + | Caution: [[rust]] is common in this area |
| - | <br>{{Photo!|863A-01a.jpg|Datsun%201200/1971}} | + | <br>{{UploadPost|13022_4e3e72f07f1d4.jpg|378850}} |
| [[Category:Body]]{{End}} | [[Category:Body]]{{End}} | ||
Revision as of 00:19, 19 November 2018
The exterior fenders bolt to the inner Hood Ledge pieces, which are welded to the chassis rails at the bottom. The rear if the ledges are welded to the Cowl and at the front to the radiator Core Support, completing the box-like structure of the front sheet metal (the Engine Bay). And as you might guess, the bonnet (hood) lies just above the top edges of the Hood Ledge.
Fenders
guards, wings
Main: Fenders
Hood Ledge
Ledge with Tower | 12 - Hood Ledge Front Body Panels Part Numbers
Original * 64100-H1000 HOOD LEDGE ASS'Y (R.H.) * 64101-H1000 HOOD LEDGE ASS'Y (L.H.)
From 1271 * 64100-H3100 HOOD LEDGE ASS'Y (R.H.)
From 0772 * 64100-H7000 HOOD LEDGE ASS'Y (R.H.) * 64101-H7000 HOOD LEDGE ASS'Y (L.H.)
In these photos, you can see how the hoodledge panels (which incorporate the strut towers) form the sides of the engine compartment:
Strut Towers are welded to the hood ledge (but sold as one piece, not taken apart like this)
Hood Ledge Reinforcement
* 64118-H1000 REINF-HOODLEDGE,UPPER,RH (from '70-Sep) superceded 64120-H1000 REINF-HOODLEDGE,UPPER,RH * 64121-H1000 REINF-HOODLEDGE,UPPER,LH (from '70-Sep) superceded 64119-H1000 REINF-HOODLEDGE,UPPER,LH
Caution: rust is common in this area
¤