hey everyone as i only just got my motor built and a few weeks later my 1200 sedan was side swipped ive decided to part ways with everything and wreck the whole car so everything is forsale!!!

engine- A14 oval port engine
stroker kit (1.7L approx)
high comp flat top forged pistons conrods and bearings chrome piston rings
high flow/volume oil pump
head fully rebuilt and ported/ polished to the max
twin valve springs
high performance rocker assembly
custom clutch set up
twin webber 45mm carbys (drilled out to 54mm)

the engine cost me 4500 without the carby set up
will sell for $4000 with the carbys, alternator, gilmer drive system..
still basically a brand new engine only done 1800kms

also for sale is my 60a 5 speed g/box excellent condition wen taken out of car selects all gears fine no noises
$850

and my tailshaft and diff
custom made tailshaft to suit a series g/box to bolt onto a mitsubishi scorpion diff wich has been shortened to fit into a datsun 1200 sedan this includes big dsk brakes and hand brake cable

$700

all in good working order prices are negotiable but not by much as thiese items have cost me alot more than wat im asking for

call mitch on 0421497021

also see my other post which is wrecking my whole 1200 sedan!!

Name of the engine builder and a dyno sheet will help your sale.

Not necessarily for the HP figure but it at least indicates it should have been tuned properly and give an idea of the HP and TQ curves

running in tune got 86.6 hp atw
and engine is built by dominator engine services... dynoer didnt wanna push the engine just yet as the engine was built then i put it in the car got it started ran the cam in and then towed it to the dyno and he didnt wanna flat stick it straight away..

most people won't (or I should say "shouldn't") be worried about peak HP numbers (always nice to brag tho eh? ) but if I was buying a big $$ motor I want to know it has been tuned well and has a good builder behind it..

Anyway, more info the better for that kind of money (I am sure you got a lot of info before you forked it over) and good luck with the sale(s)!

cheers buddy.. 86.6hp means im bragging??? lol the russel (dominator engines) has promised 120-130 atw with a full tune so yeahh who ever buys this set up off me will have a pretty quick datto possibly one of the fastest n/a Aseries engines on the road..

how was the stroke increased?

Sounds like a nice motor

For that money ide wanna strip it before buying it and checking it out properly

The horsepower figures arnt what ide expect from such a worked motor a series ,i know of an a16 that was built for 160 ,so your should make more than that

Any idea how it was done ?

GL with the sales :)

russel (dominator engines) is a good engine builder, he has done the tooling on a few of my engines and i have recomended him. if he said it will get 120-130hp that's what you should expect.

good luck with the sale its worth what your asking

Show me a N/A A series on pump fuel with 160 hp atw
There isn't one I've ever seen despite rumours

Sounds like a good setup
Shame about the car
Good luck with the sale

Ok sorry neil ,was under the impression niges motor was "built" for 160 ,i didnt say it had it ,just saying it was built with the intention of making 160hp ,weither or not thats at the wheels or flywheel I dont know

Anyways sounds like an awesome setup ,shame it didnt get used much before the car was hit