User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad



Browsing this Thread:   1 Anonymous Users



« 1 2 (3) 4 5 6 »


Re: I am a VSCCS Engineer - NSW Registration of Modified/Altered Vehicles
No life (a.k.a. DattoMaster)
Joined:
2007/6/15 10:47
From MOOROODUC. Victoria
Group:
Registered Users
Posts: 1475
Offline
oh, don't get me wrong .... I will get it engineered fully before I register it

Posted on: 2012/7/14 11:14
_________________
Red 1200 Coupe (Build: DEMAC's 1200 Coupe)
Blue 1200 Ute, CA18DE Auto (Build: DEMAC's 1200 Ute)
Green 1200 Sedan (Build: Kermit the beat up sedan)
Green Sedan #2 (Current build: DEMAC's 1200 Sedan)
Transfer the post to other applications Transfer


Re: I am a VSCCS Engineer - NSW Registration of Modified/Altered Vehicles
Quite a regular
Joined:
2012/5/27 8:44
From Mid North Coast N.S.W
Group:
Registered Users
Posts: 43
Offline
Thanks for the reply mate. A blue slip is do-able, a new engineers report for this car is un-do-able.

Thanks again.

Posted on: 2012/7/14 12:32
_________________
'72' B110 sdn
'68' (allegedly) B110 sdn
'72' 808 sdn
'00' E50 ELGRAND
'93' JZA80 Supra
Transfer the post to other applications Transfer


Re: I am a VSCCS Engineer - NSW Registration of Modified/Altered Vehicles
Just can't stay away
Joined:
2010/9/8 13:38
From Sydney
Group:
Registered Users
Posts: 138
Offline
Good idea demacoz.

Posted on: 2012/7/15 4:07
Transfer the post to other applications Transfer


Re: I am a VSCCS Engineer - NSW Registration of Modified/Altered Vehicles
No life (a.k.a. DattoMaster)
Joined:
2010/11/1 1:01
From Goulburn NSW
Group:
Registered Users
Posts: 1788
Offline
Hi 25gtv can u move the chassie rails inward on a ute and get it passed or is it a nono to alter the chassie in anyway or form.

Posted on: 2012/7/16 10:34
Transfer the post to other applications Transfer


Re: I am a VSCCS Engineer - NSW Registration of Modified/Altered Vehicles
No life (a.k.a. DattoMaster)
Joined:
2003/10/13 7:32
From newcastle, NSW
Group:
Registered Users
Posts: 1691
Offline
I'm intereseted to know about the legalitities of an A-series turbo?

What you be looking for to fully engineer an A-15 turbo?

Posted on: 2012/7/16 10:49
Transfer the post to other applications Transfer


Re: I am a VSCCS Engineer - NSW Registration of Modified/Altered Vehicles
Just can't stay away
Joined:
2010/9/8 13:38
From Sydney
Group:
Registered Users
Posts: 138
Offline
mcdat, It would be very difficult to move the chassis rails and have it passed as safe. Manufacturers spend a lot of time and wreck a lot of vehicles to be sure that the design is ideal. I would need to see the car and the design plans. What is the goal/reason for moving the rails?

steveo, The legalities of a conversion like this can be simple or complex depending on the year model of your car and what ADRs it needs to comply with. It is definitely passable. Obviously there would need to be upgrades to the brake system etc. Price will vary car to car. Give me a call for more info.

Cheers

Posted on: 2012/7/17 0:59
Transfer the post to other applications Transfer


Re: I am a VSCCS Engineer - NSW Registration of Modified/Altered Vehicles
No life (a.k.a. DattoMaster)
Joined:
2009/8/26 6:58
From mandurah
Group:
Registered Users
Posts: 3310
Offline
Hey Matt

Just wondering ,do you see any problems with putting an rb30t into a 92 rodeo ute? It cane our with a 2.6l 4 cylinder petrol and ive put a 3lt turbo 6 in it

As far room goes it fits but I've had to cut the rad support to get the motor and box in as one peice

My question is

Will 10mm thick plate be enough for the engine mounts ,they're plates that bolt to the stock chassis mounts and have grade 8 12mm bolts holding them to the chassis and then the rubber moun lt bolts into them about an inch forward

What's the type with clearancing ? The head is about an inch away from the firewall
And the radiator is about an inch away from the timing cover

The sump is custom and has heaps of room and won't rub on anything

The tunnel is stock hasnt been belted at all ,Shifter hole has moved back about 30mm ,is that a problem?

sorry for bombing a datsun forum with my #OOPS# but not very often you get to ask these type of questions

Cheers

Posted on: 2012/7/17 2:21
_________________
77 1200 ute
77mm bore a15 ,12:1 comp
ported and reconed h89 head
fairly aggro cam ,billet rocker spacers
twin 40mm solex carbs on bpro manifold
MSD 6al2 with 2 step limiter
4speed 60a box
hd clutch
2 inch exhaust
locked 4:11 ute diff
...
Transfer the post to other applications Transfer


Re: I am a VSCCS Engineer - NSW Registration of Modified/Altered Vehicles
Just can't stay away
Joined:
2010/9/8 13:38
From Sydney
Group:
Registered Users
Posts: 138
Offline
Hi estyre,

I don't see any problems with the compliance of this vehicle.

With the clearances and the rad support, I would suggest a 'half way' / 'First inspection' just to see how things are and to make some comments on how further changes should be done.

The tunnel will need to be reinforced but this is nothing serious.

Feel free to give me a call if your ready to go ahead with the process or just need some further info.

Posted on: 2012/7/17 11:18
Transfer the post to other applications Transfer


Re: I am a VSCCS Engineer - NSW Registration of Modified/Altered Vehicles
Home away from home
Joined:
2007/6/19 14:01
From SYDNEY,NSW
Group:
Registered Users
Posts: 529
Offline
im at menai and wonder do you guys come out an look at a car before actually bringing the car in for final inspection? rather than transport back and forth to the workshop? not sure if this is how it works for blue slips and engineering

Posted on: 2012/7/18 0:55
_________________
vouch points for PIGDOG J-Dat dats-me TRAV 40RST minitruckin 120fly DEMO 1200dat aidaniel matty discobob mick1200 cemax DATSKOOL - all have helped me out with parts...Thankyou
Transfer the post to other applications Transfer


Re: I am a VSCCS Engineer - NSW Registration of Modified/Altered Vehicles
Just can't stay away
Joined:
2010/9/8 13:38
From Sydney
Group:
Registered Users
Posts: 138
Offline
mradtee23, I do come out and do a first inspection on site if it is necessary. However, as this is for the purpose of registration there is a section in the RMS/RTA website that gives you permission to drive unregistered vehicles to a workshop etc. One issue is that if the car is deemed to be unsafe I MUST provide you with a letter stating that the vehicle must not be driven and then you would be stuck at my premises.

If you are ready for a first inspection feel free to give me a call. Usually this is just a look and discussion about what needs to be changed etc.

Regards
Matthew Rog
M.R CORP
0499234218

Posted on: 2012/7/18 1:03
Transfer the post to other applications Transfer



« 1 2 (3) 4 5 6 »



You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]