and my 2 favorites

Attach file:

---

  10.jpg (166.38 KB)


  11.jpg (167.77 KB)

Here is mine on the dyno.

Attach file:

---

  CrumbL18 on Dyno.jpg (115.42 KB)

Here is a youtube video of mine. don't know how to do the link thing so this is the name.
'Crumbs L18 on hub dyno'

Hey crumb that looks so clean maybe mil should have washed his car instead of selling! :9 I so missed out :( will try for next time :)

1200rc, the hose from the intake only feeds the 2 idle control things. Im not running either of them so i cant see them robbing any power

changing where the boost reference is could have just upped the boost to a constant 8-9psi and that would have made it rev much nicer with the engine still getting boost higher up in the rev range.

So you should be up around 120-130kw now?
Still going for a boost t and more boost?

yeah Pigdog, i looked that up last night, just idle control. It now idles at 1500rpm, so it made that worse lol

it must have just been the boost signal, lesson learnt, such a silly little thing, i thought it would be neater to run it from the compressor housing

gee its made a difference, i have a boost tee but the fittings were smaller than the boost line, i will try to get bigger fittings then crank it up to 12psi (whats the max for a T25?)

i am also contemplating $400 for an e-boost or maybe just make my own from a solenoid and hobbs pressure switch. this will probably be more benefit when i cahnge turbo but i may as well set one up now

Thanks to everyone for coming and making it the good day that it was!
I`d also like to thank Stu and Joel for their help on the day with the BBQ and getting cars on the dyno.

I just waited 15 hours for an edited video to upload, only to be told it was too large!!!! Not happy!!
I didn't want to put it on youtube. Anyone have any suggestions?

2 part vid?

looks like it was a good day, nice pics too
i hope to make the next one if it happens again

looking forward to more pics/video