Sounds like a good idea i might try it save me some time and money for the computer

Just been taking the emissions off it bassicaly nothing left haha

Attach file:

---

  .facebook_864693351.jpg (114.17 KB)

I've had 2 of these manifolds crack on the number one & two cylinder runner, across the water channel on the bottom. On the A15 in my Sunny wagon there's a brace from the top engine bracket bolt on the block to the inlet manifold. This is probably what I needed for these manifolds. A piece of round steel tubing with the ends flattened & holes drilled would probably do the job. Get it anadised & it'd look factory. As for the cam choice, I used the factory 70 degree grind, and the cam was good with the injection. My problem was I never used a throttle position sensor with the computer. So it was running off manifold vaccum only, not the best idea. Today I'd probably try the AC Delco idea, as I have a friend who loves those things.

Just a update finally got covers done for my chain for tailgate

Attach file:

---

  .facebook_-1045484035.jpg (77.60 KB)

Fuel rail painted
Injectors getting cleaned soon
Manifold in the machenest getting a blanking plate made for where the coolant or egr valve was
Was playing around with the wireing new injector plugs kindly donated by a ford

Attach file:

---

  .facebook_613685103.jpg (69.37 KB)

Updated manifold pics

Attach file:

---

  .facebook_-1205709234.jpg (69.87 KB)


  .facebook_130834912.jpg (65.43 KB)

Looks awesome

.

Havent decided yet

Got a throttle body have to mod the man to fit found a e15 electric dizzy in a box up stairs at work suprisingly all the other dizzys were all in bits and this one complete on top

Attach file:

---

  20131023_181728.jpg (86.96 KB)


  20131023_181715.jpg (105.88 KB)


  20131022_195500.jpg (110.69 KB)


  20131022_195300.jpg (102.61 KB)