Turbo exhaust manifolds

Revision as of 10:48, 16 July 2018; view current revision
<-Older revision | Newer revision->

The stock manifold may be used with a J-pipe for mounting a turbo. But a more direct mount is more efficient (allows more power).

Overview

Direct Mount exhaust manifold
Album 13630

Stock Manifold with #J-pipe

topgear manifold | rev210 manifold
Album 8137 Album 10599

This factory A14 forklift exhaust manifold might be useful:
Album 1090

Exhaust manifold ideas
Album click to view Album 13663

J-pipe

The stock manifold may be used with a looping pipe (J-pipe) for mounting a turbo. But a more direct mount is more efficient (allows more power), the J-pipe is the easiest and quickest to fabricate. It will make a lot more HP than a stock engine.

Album 1000 Album 999 Album 2949 Album 2948 Album 5881 Album 5904 Album 5906

frankthedolphintrainer

Album click to view Album click to view

Big bore 1.5 inch mandrel bent steam pipe with HPC coating

datto1000wagon

Album 18884 Album 18885

Album click to view Album click to view Album click to view Album click to view Album click to view Album click to view Album click to view Album click to view

shaun

shaun's top mount manifold. A14 with a T03 turbo (ex-VL), +1.5mm forged pistons and runs on straight LPG (new gas research), all fitted to a red 1200 ute. SOLD 23 June 2005

Album 6680 Album 6681 Album 6682 Album 5365

Photo Index

See Main Article: Turbo Manifold Photos