| Project GX
 Trix  Misc  2007/8/4 11:18  Tell a friend
 1655  2  0.00 (0 votes)
|
| Project GX
Trix Misc 2007/8/4 11:15 Tell a friend
1329 0 0.00 (0 votes)
| New 17" wheels from rear... Runs high but will slam it down soon!! |
|
| Project GX
Trix Misc 2007/8/4 10:45 Tell a friend
1510 0 0.00 (0 votes)
| Here is a pic of the new 17" TSW "Freeze" with Dunlop 205 x 40 x 17` Had some problems to get the adaptors from 114 to 100 PCD sorted out as it was off center when I tried to fit them the first time. My mate Thys redrilled and tapped them!! All sorted now! Will now lower the car to the max!! Pics to follow soon! |
|
| ok its official my datto is slow!
frankthedolphintrainer Misc 2007/8/4 4:29 Tell a friend
2437 15 0.00 (0 votes)
| went to the drags tonight and did a few runs the best time wasthis one at 20.42 sec and my best reaction time for the night was 0.768 and my highest terminal speed was a massive 62.84 mph, i couldnt help but laugh. i did this so that i could see the difference in power when i do the turbo conversion this week. |
|
| New wheels for the Fairlady.
sidedraught sidedraught 2007/8/4 1:09 Tell a friend
2879 3 0.00 (0 votes)
| Alloy centres in chrome rims, nice period wheels. |
|
| my ute at night
Joshh Misc 2007/8/4 0:32 Tell a friend
1877 6 0.00 (0 votes)
| heres a photo i took after washing it, and in the car port at night |
|
| ca18 ute at races
frankthedolphintrainer Misc 2007/8/4 0:26 Tell a friend
1648 6 0.00 (0 votes)
|
| a15 ute- very nice
frankthedolphintrainer Misc 2007/8/4 0:25 Tell a friend
1484 0 0.00 (0 votes)
| this was at the races in townsville |
|
| a few 1200s that rocked up
frankthedolphintrainer Misc 2007/8/4 0:19 Tell a friend
1511 0 0.00 (0 votes)
|
| a few 1200s that rocked up
frankthedolphintrainer Misc 2007/8/4 0:18 Tell a friend
1857 7 0.00 (0 votes)
|
| striped!
Burke_a_lot Body and Interiors 2007/8/3 17:56 Tell a friend
2201 3 0.00 (0 votes)
| some idiot welded the side panels on and I can't get the angel grinder in. but i'll just go ahead as it is. |
|
| new dump pipe finished
frankthedolphintrainer Misc 2007/8/3 17:27 Tell a friend
1964 6 0.00 (0 votes)
| dump pipe for the a series turbo project |
|
| 7x13"
Lotto Wheels 2007/8/3 10:22 Tell a friend
2179 0 0.00 (0 votes)
| next step........fender flares |
|
| 7x13
Lotto Wheels 2007/8/3 10:19 Tell a friend
2282 0 0.00 (0 votes)
|
| ahhh finally my turbo is getting fitted
frankthedolphintrainer Engine 2007/8/3 0:11 Tell a friend
3401 13 0.00 (0 votes)
| piccy of a12t and the progress in the ute |
|
| steering rack in 1200
reuby_tuesday Forum 2007/8/2 13:20 Tell a friend
4386 3 0.00 (0 votes)
| can this type of steering rack be installed into a 1000 without too much pain? |
|
| 1200 coupe
d12coupe Forum 2007/8/2 3:19 Tell a friend
2960 8 0.00 (0 votes)
| just got 17s on my coupe thought i would post a pick |
|
| new ute
IAMDVS Misc 2007/8/2 2:16 Tell a friend
1702 3 0.00 (0 votes)
| found that there was way to much rust and chicken wire so new body was found |
|
| my ute at the spit
Joshh Misc 2007/8/2 2:13 Tell a friend
1926 3 0.00 (0 votes)
| just a pic that was on boostcruising of me |
|
| back of cap
pepper pepper 2007/8/2 2:09 Tell a friend
1629 0 0.00 (0 votes)
|
| cap front
pepper pepper 2007/8/2 2:08 Tell a friend
2404 5 0.00 (0 votes)
|
| me at power cruise
Joshh Misc 2007/8/2 2:07 Tell a friend
1733 5 0.00 (0 votes)
|
| LHD clock face
Ianey Body and Interiors 2007/8/2 0:46 Tell a friend
2059 1 0.00 (0 votes)
|
| same pic with some wanker in it
campo Misc 2007/8/1 4:36 Tell a friend
1849 3 0.00 (0 votes)
| heres another pic of the ute. but with some wank leaning on it.. |
|
| 1964 Pickup NO LONGER AVAILABLE
Adie Historic 2007/8/1 4:36 Tell a friend
4454 4  5.00 (2 votes)
|
| campos' ca ute
campo Misc 2007/8/1 4:33 Tell a friend
1666 5 0.00 (0 votes)
| before it went in for a rebuild. |
|
| dyno
Dat7oDav3 Engine 2007/8/1 1:00 Tell a friend
3623 8 0.00 (0 votes)
| dyno mild tune could push out more |
|
| wheels?
Roy13 Misc 2007/8/1 0:38 Tell a friend
2146 8 0.00 (0 votes)
| can anyone tell me the name of these wheels? |
|
| Datrats distributor 2
Ronald Misc 2007/7/31 23:53 Tell a friend
1593 0 0.00 (0 votes)
|
| Datrats distributor 1
Ronald Misc 2007/7/31 23:52 Tell a friend
1628 0 0.00 (0 votes)
shows the underneath of the gear and base plate.
thanks Zane for the photo... |
|
| KB10 on Yahoo
sidedraught sidedraught 2007/7/31 4:40 Tell a friend
3644 12 0.00 (0 votes)
|
| B10 / DATSUN 1000 Breke hose
sunny_coupe110 Brakes 2007/7/30 20:14 Tell a friend
2316 0 0.00 (0 votes)
|
| My Ute
Dat7oDav3 Misc 2007/7/30 18:56 Tell a friend
2414 8 0.00 (0 votes)
|
| mine & joshh's s ute
Dat7oDav3 Forum 2007/7/30 18:56 Tell a friend
2277 1 0.00 (0 votes)
| picture of my ute and josh's ute from my coast trip... |
|
| mine & joshh's s ute
Dat7oDav3 Forum 2007/7/30 18:55 Tell a friend
1784 0 0.00 (0 votes)
| picture of my ute and josh's ute from my coast trip... |
|
| mine & joshh's s ute
Dat7oDav3 Forum 2007/7/30 18:54 Tell a friend
2017 0 0.00 (0 votes)
| picture of my ute and josh's ute from my coast trip... |
|
| CGA3 engine
ddgonzal Tech Section 2007/7/30 15:11 Tell a friend
6059 11 0.00 (0 votes)
| 1.4 liter, lighter than A12. From Nissan Cube |
|
| Another project to the list.
sssute Misc 2007/7/30 7:15 Tell a friend
2157 3 0.00 (0 votes)
|
| SR20 NA to turbo block mods
Daveman Forum 2007/7/29 4:59 Tell a friend
3691 5 0.00 (0 votes)
|
| My Intercooler and Radiator mounted 1200 ute
ute_man Misc 2007/7/29 4:30 Tell a friend
2514 7 0.00 (0 votes)
| My Intercooler and Radiator mounted 1200 ute |
|
| My Intercooler and Radiator mounted 1200 ute
ute_man Misc 2007/7/29 4:00 Tell a friend
1957 5 0.00 (0 votes)
| My Intercooler and Radiator mounted 1200 ute |
|
| fuel pump placement
frankthedolphintrainer Misc 2007/7/29 1:15 Tell a friend
1943 5 0.00 (0 votes)
| i was looking for a place to fit my new fuel pump and thought this would be a good place as its infront and close to the fuel tank and its low, does anyone see why this is a bad place eg.dangerous or somthin |
|
| 1200 sedan 4sale....
wardat Body and Interiors 2007/7/29 0:43 Tell a friend
2795 3 0.00 (0 votes)
|
| Project GX
Trix Misc 2007/7/28 15:03 Tell a friend
1390 0 0.00 (0 votes)
| Sorry ! Here it is. Must be the ugliest wheels I ever had on a car. Will trow them away soon. New 17" TSW`s going on this week as soon as fenders can be flared! |
|
| Project GX
Trix Misc 2007/7/28 14:51 Tell a friend
1370 0 0.00 (0 votes)
| Will change these to bigger wheels soon! It is all over the road with the "Marie Biscuits"!! |
|
| Project GX
Trix Misc 2007/7/28 14:48 Tell a friend
1442 0 0.00 (0 votes)
|
| Project GX
Trix Misc 2007/7/28 14:45 Tell a friend
1646 1 0.00 (0 votes)
| New adaptors ! Currently busy doing wheel arches on body to allow bigger wheels! Pics to follow soon. |
|
| Project ZX
Trix Misc 2007/7/28 14:42 Tell a friend
1471 0 0.00 (0 votes)
| A15 Normal asp stock ! Will be fitting SD`s soon! It feels like a snail compared to my 1400 Turbo UTE!! |
|
| Project GX
Trix Misc 2007/7/28 14:39 Tell a friend
1540 0 0.00 (0 votes)
| Another shot of my GX, fitted a new st/wheel today... |
|
| Project GX
Trix Misc 2007/7/28 14:36 Tell a friend
1602 0 0.00 (0 votes)
| Someupdates on my GX: A15 NA, currently undergoing somecosmetic work.Will move on to mechanicals as the money comes in! It can be hectic to build more than one car at the sametime.PATIENCE!! |
|
| 1200 race
Datsun1200RallyCoupe Misc 2007/7/28 11:09 Tell a friend
2031 4 0.00 (0 votes)
|
| Oran Park - 1 July (3)
R-fastmotorsport Track 2007/7/28 8:05 Tell a friend
3529 15 0.00 (0 votes)
| Turn three on the GP circuit - exposes the suspension deficiencies ! Still great fun though !!!!!!!!!!!!!! |
|
| Oran Park - 1 July (2)
R-fastmotorsport Track 2007/7/28 8:03 Tell a friend
2410 2 0.00 (0 votes)
| In motion on the 'North' part of the GP circuit - having a ball !! |
|
| Oran Park - 1 July (1)
R-fastmotorsport Track 2007/7/28 8:00 Tell a friend
2438 2 0.00 (0 votes)
| Ready to go at a recent supersprint - new cage, windscreen and window net. Successful day overall. |
|
| First Chicane
matty matty 2007/7/28 6:48 Tell a friend
1446 0 0.00 (0 votes)
|
| Second Chicane
matty matty 2007/7/28 6:43 Tell a friend
1775 7 0.00 (0 votes)
| This chicane was off camber and very slick all weekend. |
|
| Wheels On Widebay
matty matty 2007/7/28 6:38 Tell a friend
1835 3 0.00 (0 votes)
|
| crome engine
93ute Members 2007/7/27 9:57 Tell a friend
2327 2 0.00 (0 votes)
| After I overhauled the engine (still standard rings) I crome some parts. Look at the top strup mounting. See any difference? |
|
| Off road UTE
93ute Members 2007/7/27 9:50 Tell a friend
2021 0 0.00 (0 votes)
| 5 centimeter taller than factory setup. Low arm regulator modification for proper alignment |
|
| 1200 coupe u2lss
ddave Track 2007/7/27 7:49 Tell a friend
2379 7 0.00 (0 votes)
| Custom single axle tilt trailer with mounted ramps and winch. |
|
| 1200 coupe u2lss
ddave Track 2007/7/27 7:46 Tell a friend
2746 0 0.00 (0 votes)
| 5 point rose joint, watts link rear end. Top of shock and top tramp link mount to the rollcage. |
|
| 1200 coupe u2lss
ddave Track 2007/7/27 7:42 Tell a friend
2018 0 0.00 (0 votes)
|
| 1200 coupe u2lss
ddave Track 2007/7/27 7:39 Tell a friend
2596 4 0.00 (0 votes)
| Fuel inject A14 running wolf 3D |
|
| 1200 coupe u2lss
ddave Track 2007/7/27 7:35 Tell a friend
2971 2 0.00 (0 votes)
| Back shot of new paint job |
|
| 1200 coupe u2lss
ddave Track 2007/7/27 7:33 Tell a friend
2106 0 0.00 (0 votes)
|
| 1200 coupe sports sedan
ddave Track 2007/7/27 7:31 Tell a friend
2342 0 0.00 (0 votes)
| This is my u2lss after the new paint job march 2007 |
|
| flared sedan - side view
L18_B110 Body and Interiors 2007/7/27 6:48 Tell a friend
3241 0 0.00 (0 votes)
this was a mates car I was just messing around with while I was tuning the turbo A12's SU. I used the flares and wheels off my old coupe. because his sedan was a bit high in the arse end, I taped the flare on a bit lower than it really should be to make it look lower at the back.
If you want to see how good a sedan can look with flares, there's a number of pics of a horn orange 2dr sedan racecar from Portugal (I think) on here too |
|
| H165 LSD
kue1000 Misc 2007/7/26 10:56 Tell a friend
2266 3 0.00 (0 votes)
| one of the fine topgear ones people have been lusting after. |
|
| Dual Sidedraughts
kue1000 Misc 2007/7/26 10:54 Tell a friend
1727 0 0.00 (0 votes)
| Sidedraughts of the webber variety |
|
| Disc Conversion Kit
kue1000 Misc 2007/7/26 10:53 Tell a friend
2065 0 0.00 (0 votes)
A dattoman 1000 drum to disc conversion kit
- this one is for a sedan as it includes the dual circuit master cylinder |
|
| Kb10 - Block and box
kue1000 Misc 2007/7/26 5:09 Tell a friend
3763 1 0.00 (0 votes)
| The engine and new g/box complete with dellow bellhousing. |
|
| Kb10 - A14 rebuilt
kue1000 Misc 2007/7/26 5:08 Tell a friend
2944 4 0.00 (0 votes)
The bits and the block together as one!
just waiting on the rockers to arrive and we'll be in business |
|
| Kb10 - A14 bits
kue1000 Misc 2007/7/26 5:07 Tell a friend
1728 0 0.00 (0 votes)
| The bits to go in and on the block |
|
| Kb10 - A14 block
kue1000 Misc 2007/7/26 5:04 Tell a friend
1870 0 0.00 (0 votes)
| The block, machined and ready to go |
|
| Kb10 - Engine Bay (empty)
kue1000 Misc 2007/7/26 5:02 Tell a friend
1780 0 0.00 (0 votes)
| The reason it's sitting so high in the previous photos. for some reason previous owner painted engine bay but not underside of bonnet or radiator support? |
|
| Kb10 - Dragways
kue1000 Misc 2007/7/26 4:59 Tell a friend
4134 4 0.00 (0 votes)
The 14" Dragways that came with it.
They suit it well but it's not quite the look i'm after. |
|
| Kb10 - it begins
kue1000 Misc 2007/7/26 4:57 Tell a friend
1623 4 0.00 (0 votes)
|
| Kb10 - original dash/steering wheel
kue1000 Misc 2007/7/26 4:55 Tell a friend
4096 9 0.00 (0 votes)
| This might have been posted before but I found it interesting that the steering wheel on my coupe is surprising similar to the one in this promo photo - allthough i believe mine is aftermarket. |
|
| Another Dyno Run
rally1200 Rally 2007/7/26 4:54 Tell a friend
1775 1 0.00 (0 votes)
| Opps posted the wrong pic last time. 110HP ATW Yes. |
|
| Kb10 - interior
kue1000 Misc 2007/7/26 4:53 Tell a friend
1647 1 0.00 (0 votes)
| The interior was pretty damm good - not show standard but still good - i've since had the buckets rebuilt and recovered in cloth, i know it aint original but it sure will help on hot days |
|
| Kb10 - Side/Rear
kue1000 Misc 2007/7/26 4:50 Tell a friend
1717 0 0.00 (0 votes)
| Came with 14" Dragways, soon to find a home on the 1000 ute - I'll be going for the superlight look in a 14" again probably |
|
| Kb10 front
kue1000 Misc 2007/7/26 4:48 Tell a friend
1445 1 0.00 (0 votes)
Here's my kb10!
This is a pic from the original owner
came with a A14 infront of a A10 gearbox with downdraft webber - ran like a bucket of ****, and had an extremely noisy clutch. |
|
| Another Dyno Run
rally1200 Rally 2007/7/26 4:43 Tell a friend
1613 0 0.00 (0 votes)
Here is the latest dyno run with the new BIG cam. 110HP Yes..:)
|
|
| Squash's 1000 Ute
kue1000 Classifieds 2007/7/26 3:08 Tell a friend
1853 0 0.00 (0 votes)
| For sale - contact squash |
|
| what is this?
PIGDOG PIGDOG 2007/7/25 23:16 Tell a friend
4488 14 0.00 (0 votes)
| on the back of an 80s model ute speedo |
|
| do you need this oil breather
frankthedolphintrainer Misc 2007/7/25 22:04 Tell a friend
1548 1 0.00 (0 votes)
| i was wondering if this hole can be welded up (the one at the top) |
|
| another piccy of turbo manifold fitted
frankthedolphintrainer Engine 2007/7/25 22:02 Tell a friend
2637 2 0.00 (0 votes)
| this one shows where about te flange sits |
|
| another piccy of turbo manifold fitted
frankthedolphintrainer Misc 2007/7/25 22:01 Tell a friend
2124 0 0.00 (0 votes)
| hers a piccy of the manifold fitted |
|
| mmm rusty
frankthedolphintrainer Engine 2007/7/25 21:58 Tell a friend
2846 11 0.00 (0 votes)
| i opened up the top of a a12 engine i just pulled out of a vannette and holy crap thats alot a rust |
|
| Weld Pro Star
DUMBO Wheels 2007/7/25 21:15 Tell a friend
2299 0 0.00 (0 votes)
|
| new dash
PIGDOG PIGDOG 2007/7/25 8:10 Tell a friend
2390 5 0.00 (0 votes)
newly fitted ute dash, with coupe tacho
also note the hazards switch....which actually works |
|
| 1200 fibreglass boot skin
120fly Forum 2007/7/25 6:29 Tell a friend
2037 4 0.00 (0 votes)
1200 boot skin .
the boot skin will weigh under 2kg once trimmed , The internal skin should weigh in around 1.5 kg .Once the two are joined and plates put in for the bolt hole .we hope for around the 4.5kg finished product for those who wanted them for race purpose street ones will have a thicker skin and frame .May also do carbon fibre internal skin witha glass outer for something different .
cheers geoff |
|
| fibreglass 1200 boot skin
120fly Forum 2007/7/25 6:18 Tell a friend
1586 0 0.00 (0 votes)
| the boot skin for the 1200 fibreglass boots |
|
| 1000 1969
FRKYCA Members 2007/7/25 5:41 Tell a friend
2870 11 0.00 (0 votes)
My new project
plans ? MAKE IT LOOK NEW AGAIN |
|
| NISMO Head Gasket
ang94541 ang94541 2007/7/25 2:53 Tell a friend
2685 2 0.00 (0 votes)
M-99996-H1150C Manifold Gasket $8.19
From nismoparts.com
on an A12 GX head. It's not sitting flush because I have not punched the holes out for the intake manifold. |
|
| 2 cruze
perthute Misc 2007/7/24 23:55 Tell a friend
1454 0 0.00 (0 votes)
|
| dat cruze
perthute Misc 2007/7/24 23:54 Tell a friend
1491 0 0.00 (0 votes)
|
| jd
perthute Misc 2007/7/24 23:54 Tell a friend
1882 2  10.00 (1 vote)
|
| jds dat
perthute Misc 2007/7/24 23:53 Tell a friend
1464 0 0.00 (0 votes)
|
| jds dat tray sub box
perthute Misc 2007/7/24 20:12 Tell a friend
1400 0 0.00 (0 votes)
|
