| franks datto ute interior
 frankthedolphintrainer  Misc  2007/4/6 15:14  Tell a friend
 2065  0  0.00 (0 votes)
|
| franks datto ute
frankthedolphintrainer Misc 2007/4/6 15:13 Tell a friend
2325 3 0.00 (0 votes)
|
| LHS altinator braket
beattie Engine 2007/4/6 10:37 Tell a friend
2435 0 0.00 (0 votes)
| Cant remember who it was but they wanted a pic of the braket I made up to keep my altinator on the Left side of the A15. Like in a 1000. The gold nuts are thru the new braket and the old braket. The other bolts are into the block but spaced out so i could it the gold bolt's head in. Just used 5mm steel(its all i had!). |
|
| hairpin
racinaround Misc 2007/4/5 23:21 Tell a friend
2146 3 0.00 (0 votes)
| "loose off" as the Taxi-racers call it. |
|
| race
racinaround Misc 2007/4/5 23:20 Tell a friend
1995 0 0.00 (0 votes)
|
| Damage to front LHS guard.
Graemes50 Body and Interiors 2007/4/5 22:54 Tell a friend
2140 0 0.00 (0 votes)
Top coat done. After the paint has well cured it will need a buff to bring up the gloss. Compared to what I started with, it looks fine.
Bad pic. see the other one, I can't delete this! |
|
| Damage to front LHS guard.
Graemes50 Body and Interiors 2007/4/5 22:52 Tell a friend
2425 0 0.00 (0 votes)
| Top coat done. After the paint has well cured it will need a buff to bring up the gloss. Compared to what I started with, it looks fine. |
|
| Damage to front LHS guard.
Graemes50 Body and Interiors 2007/4/5 22:40 Tell a friend
2611 1 0.00 (0 votes)
There are repro. guards available but I thought I would have a go at repairing this little wrinkle.
As a bonus, the side repeater is undamaged and will be re-used. |
|
| Damage to front LHS guard.
Graemes50 Body and Interiors 2007/4/5 22:31 Tell a friend
2207 0 0.00 (0 votes)
After a few coats of primer/surfacer and some spot putty, it is all ready for topcoat.
|
|
| Damage to front LHS guard.
Graemes50 Body and Interiors 2007/4/5 22:25 Tell a friend
2267 0 0.00 (0 votes)
| Initial filler application shows that there is not much needed to regain the correct shape. |
|
| Damage to front LHS guard.
Graemes50 Body and Interiors 2007/4/5 22:22 Tell a friend
2090 0 0.00 (0 votes)
| Back on the ute, the panel is looking much better. Time for some filler. |
|
| Damage to front LHS guard.
Graemes50 Body and Interiors 2007/4/5 22:17 Tell a friend
2137 0 0.00 (0 votes)
| First step was to literally pull the panel back into where it should be. Just using my hands and the flat of my palm, I was able to re-shape it to this. |
|
| my exa
dennis Racing 2007/4/5 20:50 Tell a friend
2358 1 0.00 (0 votes)
| the wife in action at bathurst |
|
| my exa
dennis Racing 2007/4/5 20:48 Tell a friend
2192 0 0.00 (0 votes)
| my exa at bathurst ahc 2006 |
|
| a ca dat
aca18turbo Members 2007/4/5 16:35 Tell a friend
1914 3  10.00 (1 vote)
|
| a ca dat
aca18turbo Members 2007/4/5 16:29 Tell a friend
1762 4 0.00 (0 votes)
|
| Latest dyno Run
rally1200 Engine 2007/4/5 11:54 Tell a friend
2350 1 0.00 (0 votes)
| Unfortunatley the radiator sprung a large leak so we where unable to tune. we did this power run and shut it down |
|
| Armbrust rocker cover.
Dodgeman Misc 2007/4/5 11:28 Tell a friend
5662 4 0.00 (0 votes)
| One of the three new ones brought into Australia recently. |
|
| Honeywell Hall Effect sensor, 2AV54.
Graemes50 Tech Section 2007/4/5 9:42 Tell a friend
5538 2 0.00 (0 votes)
Purpose designed HES for auto. distributors.
Made by Honeywell - Part Number: 2AV54. [Alternative to Siemens HKZ101 or HKZ121] |
|
| From rear
racinaround Misc 2007/4/5 3:10 Tell a friend
4261 0 0.00 (0 votes)
| Amazing how close it all lined up. Worked out pretty well. Now I just need to do the engine and trans mountsin the car and we'll be going good. |
|
| Right side
racinaround Misc 2007/4/5 3:07 Tell a friend
4184 0 0.00 (0 votes)
|
| Bell housing
racinaround Misc 2007/4/5 3:05 Tell a friend
4436 0 0.00 (0 votes)
| Left side of custom bellhousing. Took the fron of the FWD SR20 and the back of the Supra, cut, machined and welded and this is what came out. |
|
| SR20/ Supra Trans
racinaround Misc 2007/4/5 3:02 Tell a friend
3288 2 0.00 (0 votes)
| Made custom bell housing to fit SR20 to Supra Trans. |
|
| KB10(S44)
sunny_coupe110 Racing 2007/4/5 0:05 Tell a friend
2888 4 0.00 (0 votes)
|
| right guard
slidewayz Classifieds 2007/4/4 18:55 Tell a friend
1541 0 0.00 (0 votes)
ute for sale
this guard shows the pearl paint colour well
looks best in direct sunlight... |
|
| rear of ute
slidewayz Classifieds 2007/4/4 18:53 Tell a friend
1712 0 0.00 (0 votes)
ute for sale victoria 55620816
rear is fitted with new tailgate and lights
but is missing one latch |
|
| interior of ute
slidewayz Classifieds 2007/4/4 18:50 Tell a friend
1768 0 0.00 (0 votes)
| inside the ute is original except for the crappy seat covers hiding the rough seats |
|
| utefloor
slidewayz Classifieds 2007/4/4 18:49 Tell a friend
2187 0 0.00 (0 votes)
interior of ute for sale
original vinyl covering |
|
| rightside
slidewayz Classifieds 2007/4/4 18:47 Tell a friend
1606 0 0.00 (0 votes)
ute for sale victoria
55620816 |
|
| utefront
slidewayz Classifieds 2007/4/4 18:46 Tell a friend
1468 0 0.00 (0 votes)
ute for sale victoria
55620816 |
|
| 7.5psi theoretical curve
Grunterhunter Misc 2007/4/4 16:25 Tell a friend
1992 0 0.00 (0 votes)
| Much closer to the actual result from 10psi boost. |
|
| projected 10psi power
Grunterhunter Misc 2007/4/4 16:24 Tell a friend
2025 0 0.00 (0 votes)
| simple addition model using the original power curve. Perfect world, not real world. |
|
| OLD BLUE
Guest Misc 2007/4/4 0:15 Tell a friend
1472 0 0.00 (0 votes)
Spoted this old gal yester day
SAFE HAPPY EASTER 2 ALL
Cheers Peter |
|
| 120Ys for sale/wrecking
Tyrie Classifieds 2007/4/3 20:07 Tell a friend
2147 2 0.00 (0 votes)
| Theres another white coupe not in this shot, call 0423 972 081, located near bungendore NSW |
|
| Datsuns for sale/wrecking
Tyrie Classifieds 2007/4/3 20:05 Tell a friend
1610 0 0.00 (0 votes)
| Call 0423 972 081 for parts/cars, located near bungendore NSW |
|
| A12 head bolt / block clearance
ang94541 ang94541 2007/4/3 16:55 Tell a friend
2095 1 0.00 (0 votes)
|
| GX head and Nissan comp header
ang94541 ang94541 2007/4/3 16:54 Tell a friend
2822 2 0.00 (0 votes)
|
| kb210 rear gx badge
matbighat matbighat 2007/4/3 11:06 Tell a friend
2718 0 0.00 (0 votes)
|
| flaming ute
matbighat matbighat 2007/4/3 11:04 Tell a friend
3453 9 0.00 (0 votes)
| jdm. squared flares. ssr or longchamp wheels |
|
| b110 tudor
matbighat Racing 2007/4/3 11:03 Tell a friend
3772 7 0.00 (0 votes)
|
| In ecuador
Jlve datsun120ycoupe 2007/4/3 8:55 Tell a friend
1676 0 0.00 (0 votes)
|
| Datsun in Ecuador
Jlve datsun120ycoupe 2007/4/3 8:51 Tell a friend
2348 0 0.00 (0 votes)
|
| demister vent
possum1200 Misc 2007/4/2 22:02 Tell a friend
1805 1 0.00 (0 votes)
|
| heater outlet
possum1200 Misc 2007/4/2 22:01 Tell a friend
1555 0 0.00 (0 votes)
|
| Blown A15- 10psi
Grunterhunter Misc 2007/4/2 21:15 Tell a friend
2028 0 0.00 (0 votes)
| here is the 10psi setup vs the original setup. the two curves were taken on different dyno's. The 10 psi was taken on a dyno that consistently reads lower than most other dyno's around the state. But, no excuses- the mph at the end of the drag strip will tell the real story. |
|
| East London drags
bones Drag 2007/4/2 18:58 Tell a friend
3602 1 0.00 (0 votes)
| This run produced a better time - 11,01sec @ 218km/h - slippery launch surface equals shite launch. Suspension still needs lots of work/tuning/fiddling for these unprepared track surfaces. The turboed Golf ran 13 something. |
|
| Ferrari wannabe
bones Misc 2007/4/2 18:50 Tell a friend
2179 0 0.00 (0 votes)
| Heres a Ferrari type kit car with a CA18DET motor i that I went up against at the last East London drags. His sideshaft went SNAP on the launch, I ran a 12 flat on 0,9 bar boost |
|
| my new 200b
NIS15L Misc 2007/4/2 18:37 Tell a friend
2259 0 0.00 (0 votes)
|
| 120Y dumped on chasers
Tyrie Misc 2007/4/2 18:32 Tell a friend
3003 16 0.00 (0 votes)
|
| my new 200b
NIS15L Misc 2007/4/2 18:29 Tell a friend
2388 2 0.00 (0 votes)
|
| More chasers
Tyrie Wheels 2007/4/2 18:28 Tell a friend
4179 13 0.00 (0 votes)
| Yep another pic, coz I love them so much :P |
|
| Leaf springs
Tyrie Suspension 2007/4/2 18:21 Tell a friend
5405 10 0.00 (0 votes)
|
| Tomei rocker cover on Yahoo
sidedraught sidedraught 2007/4/2 12:37 Tell a friend
6033 9 0.00 (0 votes)
| Rather nice if you have deep pockets. |
|
| all back together inside :)
LAGWAGON LAGWAGON 2007/4/2 2:15 Tell a friend
1877 0 0.00 (0 votes)
| new carpet and gearstick cover (the metal underneath not just that rubber bit!) dash and column surrounds also done |
|
| interior cleanup
LAGWAGON LAGWAGON 2007/4/2 2:14 Tell a friend
1770 0 0.00 (0 votes)
| had a big day today, made a cover for the gearstick, put in some fresh carpet and basically put the dash and interior all back together! |
|
| Keihins
dat141 Engine 2007/4/1 23:50 Tell a friend
3221 6 0.00 (0 votes)
| My Sedan's engine bay. Not too pretty but it might get some attention in the future. The carbies are 40mm Keihins |
|
| found some alright looking stockies
sikdatto1200 Misc 2007/4/1 21:10 Tell a friend
1878 4 0.00 (0 votes)
| still 13s but chrome surrounds from some old mitsubishi on sunny rims! |
|
| blew ANOTHER headgasket
sikdatto1200 Misc 2007/4/1 21:08 Tell a friend
1820 4 0.00 (0 votes)
| time to have a long hard re-think, need to look into maybe using series 1 8.5:1 pistons and modify chambers etc, pinging KILLS engines fast no matter how there built! Coolant is pouring out between the head and the block looks like its steam powered! |
|
| drift damage
sikdatto1200 Misc 2007/4/1 21:03 Tell a friend
1483 0 0.00 (0 votes)
|
| Roy's B210 Tail Section update
AFXB210 Body and Interiors 2007/4/1 13:48 Tell a friend
2572 0 0.00 (0 votes)
| tail light mock-up, rear spoiler, rear bumper, Mock-up for USA plates from European rollpan and getting ready to move gas filler to between the taillights |
|
| Steering and Dash Update
AFXB210 Body and Interiors 2007/4/1 13:41 Tell a friend
2631 0 0.00 (0 votes)
Roy's New Guage and Dash Layout to accomodate more guages. Updating with Chromoly Steering tube and U-joint and steering bearing
|
|
| Redo Dash and Steering
AFXB210 Body and Interiors 2007/4/1 13:37 Tell a friend
2791 0 0.00 (0 votes)
| Roy's New Guage and Dash Layout to accomodate more guages. Updating with Chromoly Steering tube and U-joint and steering bearing |
|
| THIS IS WILD
Guest Misc 2007/4/1 1:07 Tell a friend
1896 3 0.00 (0 votes)
| I like this Guy,he,s one to achive any thing any way |
|
| 1000 2 door for sale
boondy Classifieds 2007/4/1 1:07 Tell a friend
1736 0 0.00 (0 votes)
|
| 1000 2 door for sale
boondy Misc 2007/4/1 1:05 Tell a friend
1511 0 0.00 (0 votes)
|
| 1000 2 door for sale
boondy Misc 2007/4/1 1:04 Tell a friend
1504 0 0.00 (0 votes)
|
| 1000 2 door for sale
boondy Misc 2007/4/1 1:03 Tell a friend
1658 0 0.00 (0 votes)
|
| 1000 2 door for sale
boondy Classifieds 2007/4/1 1:02 Tell a friend
1695 0 0.00 (0 votes)
|
| 1000 2 door for sale
boondy Classifieds 2007/4/1 1:02 Tell a friend
1778 0 0.00 (0 votes)
|
| my afternoon effort
possum1200 Misc 2007/4/1 0:13 Tell a friend
1397 0 0.00 (0 votes)
| mum was having a sook after she got out that the lower lip below the door trim scratched her.......so i folded down the lip and resprayed it black.......didnt turn out to bad for a 16 yr old with just a hammer lol |
|
| Out of the Garage 3
Coops Coops 2007/3/31 21:50 Tell a friend
2592 0 0.00 (0 votes)
Had the 2nd drive at the mechanics workshop.... Gave it a bit of a bootful turning around in the carpark.... And blew the back wheels!
Let's call it an appetizer: - ) |
|
| Out of the Garage 2
Coops Coops 2007/3/31 21:47 Tell a friend
2399 0 0.00 (0 votes)
Had the 1st drive - Out of the garage & onto the car trailer.
Was waaay tempted to go for a quick blast up the street, but commonsense prevailed. |
|
| Out of the Garage 1
Coops Coops 2007/3/31 21:46 Tell a friend
2330 3 0.00 (0 votes)
Engine, Electrics, Driveline & Diff sorted.
Off to get the exhaust, windscreen & Mod plate, then we're on the road! |
|
| Mystery Sunny Emblem
matbighat matbighat 2007/3/31 18:09 Tell a friend
2725 4 0.00 (0 votes)
|
| Early KB110 GX Interior
matbighat matbighat 2007/3/31 18:07 Tell a friend
2654 0 0.00 (0 votes)
| pre facelift models were all vinyl |
|
| 120y
datgirl1200 Members 2007/3/31 16:45 Tell a friend
1928 5 0.00 (0 votes)
|
| 1200 van Free Parts ...
FAZPIOES Body and Interiors 2007/3/31 8:51 Tell a friend
4040 8 0.00 (0 votes)
| I believe this 1200 van is still complete with ALL Parts ... ( written : Be Aware of the DOG ) |
|
| spare sedan
slidewayz Classifieds 2007/3/31 3:10 Tell a friend
1500 0 0.00 (0 votes)
|
| PART 2
Guest Misc 2007/3/31 1:55 Tell a friend
1360 0 0.00 (0 votes)
|
| The Burkland Families Salt Racer 120Y
TnPshow TnPshow 2007/3/31 1:42 Tell a friend
2360 0 0.00 (0 votes)
|
| The Burkland Families Salt Racer 120Y
TnPshow TnPshow 2007/3/31 1:40 Tell a friend
2704 1 0.00 (0 votes)
|
| The Burkland Families Salt Racer 120Y
TnPshow TnPshow 2007/3/31 1:39 Tell a friend
2210 0 0.00 (0 votes)
|
| how's this for deep dish
IAMDVS Misc 2007/3/30 22:52 Tell a friend
1591 0 0.00 (0 votes)
| i no it's not datsun but wouldn't you like that on your car |
|
| why is this pic not working grrrrrrrr
IAMDVS Misc 2007/3/30 22:44 Tell a friend
1336 0 0.00 (0 votes)
| why is this pic not working grrrrrrrr |
|
| Craig's 2 door
K-DOGG Misc 2007/3/30 21:17 Tell a friend
1382 0 0.00 (0 votes)
|
| Craig's 2 door 1200 again!
K-DOGG Misc 2007/3/30 21:16 Tell a friend
1801 4 0.00 (0 votes)
|
| recent photo of my ute
possum1200 Misc 2007/3/30 18:29 Tell a friend
1730 4 0.00 (0 votes)
| gave her a wash and cleaned all the interior figured it deserved a photo ;P |
|
| JAPAN Under ATACK
Guest Misc 2007/3/30 2:41 Tell a friend
2905 19 0.00 (0 votes)
|
| KB10
OSBIL Misc 2007/3/30 2:25 Tell a friend
1423 0 0.00 (0 votes)
|
| KB10
OSBIL Misc 2007/3/30 2:08 Tell a friend
1668 4 0.00 (0 votes)
Needed parts
Front Grill
Side Mirrors |
|
| Turbo oil retunr welded in
kululadotgroen Misc 2007/3/30 0:29 Tell a friend
1764 0 0.00 (0 votes)
| I welded a fitting, bought from a hydrolics shop, into the sump. Nice and thick so the oil can return quickly. |
|
| Engine being finished of
kululadotgroen Misc 2007/3/30 0:21 Tell a friend
1887 0 0.00 (0 votes)
| Actually a general shot of the work area, but I've washed the engine, and opened the sump, to weld in the turbo oil return pipe. Still going to spray the lot, to make it look better. Was contemplating taking the engine apart completely, but will see if it has problems when I start it the first time. If so then I'll do that. |
|
| Making gaskets
kululadotgroen Misc 2007/3/30 0:17 Tell a friend
1884 0 0.00 (0 votes)
| Tapping out some gaskets for the waterpump housing and other stuff |
|
| Racing clutch
Grunterhunter Drive Train 2007/3/29 17:40 Tell a friend
2217 0 0.00 (0 votes)
| Turns out my dad's mechanic had this sitting in his workshop for the last 10 years, leftover from dad's racing car. Looks highly custom. not much fun on the road. hopefully I will be able to stick a standard plate in it and just use it for the uprated clamping pressure. |
|
| 'Yes officer, its all completely standard'
Grunterhunter Engine 2007/3/29 17:35 Tell a friend
4240 3 0.00 (0 votes)
| not enough bonnet clearance to make it work, unfortunatley |
|
| Blower parts ready for assembly
Grunterhunter Engine 2007/3/29 17:33 Tell a friend
2650 0 0.00 (0 votes)
| the 2 pullys in the middle are a 5psi and a 10psi, the idler pulley to the right is an aftermarket one for a commodore (has edge ridges to keep the belt on) |
|
| how about this for a back end
IAMDVS Misc 2007/3/29 15:03 Tell a friend
3790 12 0.00 (0 votes)
| don't no if been posted . but who does not like big feet |
|
| Bluebird 1800SSS - 1st day ...
FAZPIOES Body and Interiors 2007/3/29 14:08 Tell a friend
21693 186 0.00 (0 votes)
|
| mini lites
flydato Classifieds 2007/3/29 14:06 Tell a friend
1335 0 0.00 (0 votes)
|
| mini lites
flydato Classifieds 2007/3/29 14:05 Tell a friend
1249 0 0.00 (0 votes)
|
