| SPEAKING OF SOUND
 Guest  Misc  2007/3/22 5:50  Tell a friend
 1391  0  0.00 (0 votes)
I agree thease little 4s can cut a cool note,ive had Teenagers come up 2 me and say what u got in that,it sounds better than my Dads V8 and coments such as WOWWwww thats sick(meaning cool or great LOL),Police in NSW now have a gadget that mesurs sound like a radar gun
So ill have a ticket 4 that soon i gess |
|
| today's datnats rush efforts
LAGWAGON LAGWAGON 2007/3/21 5:24 Tell a friend
1987 3 0.00 (0 votes)
| man it was a day of everything juuust not fitting and requiring a little filing and triming everywhere! my car that was almost complete looks miles off now! should be back and coilovered by tomorrow... |
|
| Sunny strut brace
BAD310 BAD310 2007/3/21 2:21 Tell a friend
3087 0 0.00 (0 votes)
| The strut brace for my sunny. Made from two ute tonneau cover support bars, welded together |
|
| Petrol tank woes...
kululadotgroen Misc 2007/3/20 19:30 Tell a friend
3073 14 0.00 (0 votes)
| So I inspected the tank when I wanted to start making the holes for bigger fitting for the fuel injection, adn found that it was all rusted up. I cut it i half, and will be cleaning it p and welding it back together when I'm done. It's only surface rust, and cleans up nicely with a wire brush in the drill, as can be seen in the lefthand of the bottom half. |
|
| NISSANS WEPON
Guest Misc 2007/3/20 8:27 Tell a friend
2151 19 0.00 (0 votes)
Is thisthe Farther of all Nissans??
Looks like its got Balls |
|
| My Z
sikyne Engine 2007/3/19 23:59 Tell a friend
3020 4 0.00 (0 votes)
| 297 HP L Series, 50mm Throttle bodies |
|
| My Z
sikyne Track 2007/3/19 23:56 Tell a friend
2663 2 0.00 (0 votes)
| A 260Z Marque Sports car i purchased a couple of years ago. 297HP, motec sachs clutch, gibson motorsport R200 diff, adjustable racing wet legs all round, and plenty of other goodies to go.. want to get it registered later in the year. |
|
| my coupe painted
pager pager 2007/3/19 23:55 Tell a friend
2167 1 0.00 (0 votes)
| Few months of messing round and its finally done. Should have it home by the end of the week then the interior begins. |
|
| F.S. RACING COILOVER SHOCKS
sikyne Classifieds 2007/3/19 23:18 Tell a friend
1421 0 0.00 (0 votes)
|
| F.S. RACING COILOVER SHOCKS
sikyne Classifieds 2007/3/19 23:17 Tell a friend
1429 0 0.00 (0 votes)
|
| F.S. RACING COILOVER SHOCKS
sikyne Classifieds 2007/3/19 23:16 Tell a friend
2022 2 0.00 (0 votes)
These are very good double adjustable alloy body coil overs. I was going to use them in my coupe but dont have enough total travel.
Would be good for sport sedan or special.
I paid a cheap price of $250. each and would want something close to that to sell them, Simon.. |
|
| IPRA coupe body kit
sikyne Racing 2007/3/19 23:06 Tell a friend
3618 5 0.00 (0 votes)
I bought these from 120 fly (geoff).Im very happy with the kit. It will take a bit of modifying because the car has such a low ride hight.
The front flares have to be raised 70mm and the front spoiler has to be shortened about 50 mm. I`ll just cut a section out of the centre from left to right. |
|
| B210 Luggage Rack #2
DatsunJim Members 2007/3/19 19:00 Tell a friend
2027 0 0.00 (0 votes)
| The second picture. Check the pin stripping, Hand Painted |
|
| B210 Luggage Rack #1
DatsunJim Members 2007/3/19 18:56 Tell a friend
2058 0 0.00 (0 votes)
| I had a request for these pictures |
|
| W58 Supra Box
3Rotor Misc 2007/3/19 15:00 Tell a friend
5677 21 0.00 (0 votes)
oh yeah.... so far I can't find anything that prooves this one not to be a Supra Box (W58)
|
|
| Rear shot
Lachie Misc 2007/3/19 9:38 Tell a friend
2018 1 0.00 (0 votes)
|
| 1000 2dr for sale
TnPshow Classifieds 2007/3/19 8:12 Tell a friend
1607 0 0.00 (0 votes)
|
| 1000 2dr for sale
TnPshow Classifieds 2007/3/19 8:11 Tell a friend
1441 0 0.00 (0 votes)
|
| 1000 2dr for sale
TnPshow Classifieds 2007/3/19 8:11 Tell a friend
1474 0 0.00 (0 votes)
|
| 1000 2dr for sale
TnPshow Classifieds 2007/3/19 8:10 Tell a friend
1756 0 0.00 (0 votes)
|
| 1000 2dr for sale
TnPshow Classifieds 2007/3/19 8:10 Tell a friend
1388 0 0.00 (0 votes)
|
| 1000 2dr for sale
TnPshow Classifieds 2007/3/19 8:09 Tell a friend
1402 0 0.00 (0 votes)
|
| 1000 2dr for sale
TnPshow Classifieds 2007/3/19 8:09 Tell a friend
1384 0 0.00 (0 votes)
|
| 1000 2dr for sale
TnPshow Classifieds 2007/3/19 8:08 Tell a friend
1524 0 0.00 (0 votes)
|
| Mock Up with new master cylinders
AFXB210 Brakes 2007/3/19 1:53 Tell a friend
2269 0 0.00 (0 votes)
| Mock Up with new master cylinders |
|
| 521 Pedal Assembly Swap Completed
AFXB210 Brakes 2007/3/19 1:51 Tell a friend
2210 0 0.00 (0 votes)
| 521 Pedal Assembly Swap Completed |
|
| 521 Pedal Assembly Swap Completed
AFXB210 Brakes 2007/3/19 1:49 Tell a friend
2880 0 0.00 (0 votes)
| 521 Pedal Assembly Swap Completed |
|
| Hyundai radiator in a 1000
beattie Engine 2007/3/18 7:32 Tell a friend
2821 4 0.00 (0 votes)
| After many months searching and trial fitting i found a rad that will fit in a 1000 without cutting out the inner guards and relocating the battery! A Hyundai Excel X3 DOHC. I took a stuffed one home from work and made some brakets and hoses up for it. Should work well when i get a new rad and a thermo fan. |
|
| ecu and bits mounted under the glovebox
LAGWAGON LAGWAGON 2007/3/18 7:11 Tell a friend
2579 6 0.00 (0 votes)
| gotta tidy up a little but it works now :) |
|
| wired up and running!!!
LAGWAGON LAGWAGON 2007/3/18 7:10 Tell a friend
1754 5 0.00 (0 votes)
| still lots of tweaking and tuning and tidying but it works! |
|
| 76 B210 updated picture
DatsunJim Members 2007/3/18 4:37 Tell a friend
2113 2 0.00 (0 votes)
| In this picture, front end lowered 3", windows have been tinted |
|
| d-club002
el_tuercas Forum 2007/3/17 22:47 Tell a friend
1561 3 0.00 (0 votes)
|
| d-club
el_tuercas Forum 2007/3/17 22:46 Tell a friend
1643 3 0.00 (0 votes)
|
| Stripped 3rd on a K40
3Rotor Misc 2007/3/17 15:51 Tell a friend
1665 1 0.00 (0 votes)
| here's the stripped 3rd gear.... allmost half way round, clean.... |
|
| w58
3Rotor Misc 2007/3/17 10:24 Tell a friend
1775 1 0.00 (0 votes)
| the clutch slave mount-point. |
|
| w58
3Rotor Misc 2007/3/17 10:23 Tell a friend
1580 0 0.00 (0 votes)
| the clutch slave mount-point. |
|
| where to cut out rad and cooler
crzy_1200_ute Body and Interiors 2007/3/17 8:37 Tell a friend
2596 1 0.00 (0 votes)
| were do i cut for cooler and rad fitment for putting an ca18det |
|
| OLD DATA
Guest Misc 2007/3/17 8:16 Tell a friend
1565 4 0.00 (0 votes)
|
| N14 Radiator Swap
cheater_5 cheater_5 2007/3/17 5:31 Tell a friend
2750 8 0.00 (0 votes)
| Pull this out of an N14 Pulsar at the local. Cost me a HUGE $68 with twin electric fans. I measured up a bunch of different radiators, most would fit width and thickness but maybe a little bit high so i stuck with this. Should fit well. |
|
| Latest photo of "George"
tens_and_twenties Misc 2007/3/17 2:53 Tell a friend
2856 7 0.00 (0 votes)
| Dimlight65's turbo A13 Coupe. Finally got the turbine wheels on it (get it? Turbo = Turbine?). Should be on the road very soon. |
|
| the tyre in question
sikdatto1200 Misc 2007/3/16 22:01 Tell a friend
1380 0 0.00 (0 votes)
|
| retread blew up on me
sikdatto1200 Misc 2007/3/16 22:00 Tell a friend
1398 1 0.00 (0 votes)
| 2nd gear sideways, bang, took out my quarter |
|
| datsun 1200
toyolite Misc 2007/3/16 12:33 Tell a friend
1674 2 0.00 (0 votes)
|
| LAND OF RISEING SUN
Guest Misc 2007/3/16 9:12 Tell a friend
1582 10 0.00 (0 votes)
|
| Suspension In Again
B120dat B120dat 2007/3/16 6:54 Tell a friend
2083 4 0.00 (0 votes)
| Just a shot from higher with the wheel on. |
|
| Stuffed pic up
B120dat B120dat 2007/3/16 6:54 Tell a friend
1824 0 0.00 (0 votes)
|
| Suspension In
B120dat B120dat 2007/3/16 6:48 Tell a friend
2009 0 0.00 (0 votes)
| the suspension is in... already has decent neg camber. |
|
| Mr Hell's Rear End
killer1200 Suspension 2007/3/16 5:13 Tell a friend
4172 4  10.00 (1 vote)
| For reference for people. |
|
| TAKE4
Guest Misc 2007/3/15 11:23 Tell a friend
1440 2 0.00 (0 votes)
|
| TAKE3
Guest Misc 2007/3/15 11:21 Tell a friend
1265 0 0.00 (0 votes)
| What can i say,changers on going |
|
| TAKE2
Guest Misc 2007/3/15 11:19 Tell a friend
1294 0 0.00 (0 votes)
|
| 120y shock vs tarago(rears)
PIGDOG PIGDOG 2007/3/15 5:11 Tell a friend
2747 5 0.00 (0 votes)
the stuff you find when you have a day off uni
orange big one is the tarago one, bit shorter in length, has more travel and is a hell of alot stiffer
so should be about the same length as a 1200 sedan rear shock, but lots stiffer |
|
| V6 IRS ute- strut tower mod
PIGDOG PIGDOG 2007/3/15 3:57 Tell a friend
1856 6 0.00 (0 votes)
for when 1.5 degrees of neg camber isnt enough
also going up about an inch or so for more travel |
|
| DATSOUND
DatsunJim Members 2007/3/14 4:05 Tell a friend
1963 6 0.00 (0 votes)
| I Think I Need A Bigger Trunk |
|
| Orange You Glad It`s Not Green
DatsunJim Members 2007/3/14 3:08 Tell a friend
1866 3 0.00 (0 votes)
| Same Car Different Color. Which Color Do You Like Better? |
|
| Green With Envy
DatsunJim Members 2007/3/14 2:52 Tell a friend
1744 0 0.00 (0 votes)
| My B210 with lights. I figure if I sell the lights I should have some on my car |
|
| Starting to take shape
kululadotgroen Misc 2007/3/13 17:03 Tell a friend
2014 3 0.00 (0 votes)
Grille fitted, head lights still loose, just propped up to see what it will look like, but grille fitted...
I prefer the old metal grille, with round lights, but it fits to deep to go over the IC, so this will have to do. Will try to fit the old grill later. |
|
| my other ute4
campo Forum 2007/3/13 7:59 Tell a friend
2082 4 0.00 (0 votes)
| nice side pic. still could be lowered more but scrapes when turning off driveways |
|
| my other ute3
campo Forum 2007/3/13 7:57 Tell a friend
1562 0 0.00 (0 votes)
|
| my other ute2
campo Forum 2007/3/13 7:55 Tell a friend
1547 0 0.00 (0 votes)
|
| my other ute
campo Forum 2007/3/13 7:53 Tell a friend
1955 1 0.00 (0 votes)
| more of a workhorse. worked a14. lowered. 120y disks and struts. 120y swaybar. 16" rims. |
|
| wiring is so much fun!
LAGWAGON LAGWAGON 2007/3/12 23:35 Tell a friend
1979 4 0.00 (0 votes)
|
| Lachie's 1200 Ute
Lachie Misc 2007/3/12 21:09 Tell a friend
2110 10 0.00 (0 votes)
|
| IX Rallye Rias Baixas Cl
rrvv Rally 2007/3/12 19:32 Tell a friend
1940 0 0.00 (0 votes)
|
| IX Rallye Rias Baixas Cl
rrvv Rally 2007/3/12 19:31 Tell a friend
1762 0 0.00 (0 votes)
|
| IX Rallye Rias Baixas Cl
rrvv Rally 2007/3/12 19:30 Tell a friend
1832 0 0.00 (0 votes)
|
| IX Rallye Rias Baixas Cl
rrvv Rally 2007/3/12 19:29 Tell a friend
1822 0 0.00 (0 votes)
|
| V6 IRS ute, front camber
PIGDOG PIGDOG 2007/3/12 19:02 Tell a friend
2323 10 0.00 (0 votes)
been playing around with the front end
ended up using a combo of 200b and 1200 lower arms and bluebird struts with r31 brakes
lower control arms are 20mm longer than stanza ones and the strut tower will be raised and moved inwards for more camber and travel
but this pic gives an idea of how it will look |
|
| SR1200 bros
2QK4U 2QK4U 2007/3/12 17:49 Tell a friend
1983 0 0.00 (0 votes)
| Turbo SR MIN712 - Evey and NA SR - 2quick |
|
| Who owns it?
2QK4U 2QK4U 2007/3/12 17:45 Tell a friend
2206 1 0.00 (0 votes)
| I spotted this on saturday at the Royal Pines resort, park next too a 360 modena (not that i took much notice of it), but this sedan was MINT!! granny spec, perfect condition dash pad and was in Excellent unrestored condition. i also passed him about 2 weeks ago at the Oxenford coomera exit and gave him the thumbs up, i was driving my Corrola at the time. |
|
| Formal Car 1200 wagon
2QK4U Misc 2007/3/12 16:53 Tell a friend
1830 4 0.00 (0 votes)
| My formal had to take the wagon. |
|
| datnats ahoy!
LAGWAGON LAGWAGON 2007/3/12 15:22 Tell a friend
1588 0 0.00 (0 votes)
| engine in, brake master and clutch mounted, brake lines all cut to size to be bent into place, cooler and radiator mounting and piping to be done. |
|
| exhaust in progress
LAGWAGON LAGWAGON 2007/3/12 15:19 Tell a friend
1635 0 0.00 (0 votes)
| the whole exhaust took me nearly three days, but is as high as i can possibly get it at least! |
|
| coilovers finished!!!
LAGWAGON LAGWAGON 2007/3/12 15:01 Tell a friend
4584 15 0.00 (0 votes)
| 255 lb springs, koni yellow externally adjustable shocks, cusco camber tops, slotted 253 mm dba disks, ferodo race pads twin spot sumitomo calipers and a partridge in a pear tree. |
|
| EFI a15 manifold
sikyne Fuel Injection 2007/3/11 21:43 Tell a friend
2600 1 0.00 (0 votes)
A manifold for LPG inj.
I put this on my daily driver, a realy good street manifold. gas nozzles are just at the head flange. |
|
| EFI a15 manifold
sikyne Fuel Injection 2007/3/11 21:15 Tell a friend
1841 0 0.00 (0 votes)
|
| EFI a15 manifold
sikyne Fuel Injection 2007/3/11 21:14 Tell a friend
2198 0 0.00 (0 votes)
|
| more pics!
addso Misc 2007/3/11 17:06 Tell a friend
1714 8 0.00 (0 votes)
|
| better pics of my ca
addso Misc 2007/3/11 16:56 Tell a friend
1261 0 0.00 (0 votes)
|
| better pics of my car
addso Misc 2007/3/11 16:51 Tell a friend
1315 0 0.00 (0 votes)
|
| Light One Up 76 B210
DatsunJim Members 2007/3/11 15:00 Tell a friend
1898 1 0.00 (0 votes)
| here is my B210 with a little added flair |
|
| Roy Butler's Parts will become the Engine
AFXB210 Engine 2007/3/11 14:10 Tell a friend
2481 3 0.00 (0 votes)
|
| Roy Butler's Modifications on B210
AFXB210 Brakes 2007/3/11 14:08 Tell a friend
2702 8 0.00 (0 votes)
| master cylinder over 2.5 inches |
|
| Roy Butler's Modifications on B210
AFXB210 Brakes 2007/3/11 14:06 Tell a friend
2219 0 0.00 (0 votes)
| master cylinder over 2.5 inces |
|
| Datsun 521 Pedal Assembly Swap to B210
AFXB210 Brakes 2007/3/11 13:51 Tell a friend
2220 0 0.00 (0 votes)
|
| Datsun 521 Pedal Assembly Swap to B210
AFXB210 Brakes 2007/3/11 13:50 Tell a friend
2213 0 0.00 (0 votes)
|
| 521 Datsun Pedal Assembly Swap to B210
AFXB210 Brakes 2007/3/11 13:48 Tell a friend
2874 2 0.00 (0 votes)
| This was done to gain clearance for the air cleaner and delete the power brakes |
|
| XI Rallye Rias Baixas
rrvv Rally 2007/3/11 11:00 Tell a friend
1845 0 0.00 (0 votes)
|
| XI Rallye Rias Baixas
rrvv Rally 2007/3/11 10:59 Tell a friend
1736 1 0.00 (0 votes)
|
| XI Rallye Rias Baixas
rrvv Rally 2007/3/11 10:59 Tell a friend
1750 0 0.00 (0 votes)
|
| XI Rallye Rias Baixas Cl
rrvv Rally 2007/3/11 10:57 Tell a friend
1695 0 0.00 (0 votes)
|
| rev tacco not working
Burke_a_lot Misc 2007/3/10 17:48 Tell a friend
1596 3 0.00 (0 votes)
| the cords r linked in the right place I think, see if u can't see a problem. ps. I think the tacco it self does not work but |
|
| hard on the brakes fer shur
datfiat Wallpapers 2007/3/10 15:45 Tell a friend
3911 11 0.00 (0 votes)
| king edward hair pin = fun |
|
| borrowed rims,race rubber AND THEN killed a ignition coil
datfiat Wallpapers 2007/3/10 14:56 Tell a friend
3393 4 0.00 (0 votes)
| one of too many times on a tilt back......10 minute fix but 2hrs from home so nrma helps ha ha! |
|
| Tow Car
DatsunJim Members 2007/3/10 13:49 Tell a friend
2071 0 0.00 (0 votes)
| Who Needs a Truck When You Own a DATSUN |
|
| TRUE BLUE
Guest Misc 2007/3/10 10:23 Tell a friend
1332 2 0.00 (0 votes)
How she usted 2 b
Cheers Peter RTE38 |
|
| Dyno Sticker
ddgonzal Tech Section 2007/3/10 7:09 Tell a friend
2411 0 0.00 (0 votes)
| This sticker was place just below the tune-up sticker on the underside of the hood. |
|
| B110 Chassis ID Plate
ddgonzal Tech Section 2007/3/10 6:21 Tell a friend
2916 1 0.00 (0 votes)
| Camera has "moderate barrel distortion in macro mode" haha |
|
| KPB310 ID plate
ddgonzal Tech Section 2007/3/10 5:48 Tell a friend
4320 3 0.00 (0 votes)
This type of plate was used starting in 1980
A15 Single carb engine
FSW560A 5-speed
|
|
| A12A ID plate
ddgonzal Tech Section 2007/3/10 5:40 Tell a friend
4180 5 0.00 (0 votes)
B310 ID plate, found on the firewall.
Note the 56a transmission ID |
|
