| Right engine mount spacing
 kululadotgroen  Misc  2006/7/13 1:39  Tell a friend
 2748  0  0.00 (0 votes)
| I built a gantry in the garage to do this job, and these two pieces of 100x50x2 rectangular was left over, and they fit between the old engine mounts and the sump. |
|
| Rear engine space
kululadotgroen Misc 2006/7/13 1:36 Tell a friend
2757 0 0.00 (0 votes)
| I would eventually shift the engine forward about another 20mm |
|
| Front engine space
kululadotgroen Misc 2006/7/13 1:35 Tell a friend
2431 0 0.00 (0 votes)
| Had I know I was going to cut out the whole radiator cradle, I wouldn't have taken all the measurements... |
|
| Yep, anoter angle
kululadotgroen Misc 2006/7/13 1:31 Tell a friend
2332 0 0.00 (0 votes)
| Radiator and aftermarket fan proped up with screwdriver. The radiator is a VW Golf radiator, and fits perfectly. |
|
| ignore
kululadotgroen Misc 2006/7/13 1:25 Tell a friend
2153 0 0.00 (0 votes)
|
| Another angle
kululadotgroen Members 2006/7/13 1:11 Tell a friend
3106 0 0.00 (0 votes)
| You can see here that there is a lot of space for everything. Still hangin from the chainblock |
|
| The beginings of a long journey
kululadotgroen Members 2006/7/13 1:06 Tell a friend
3735 0 0.00 (0 votes)
| I bought this 1200 GX from someone otherside of Johannesburg. It's got some surface rust on the outside, but nothing that's caused any real damage. Got it for R5000, that's about $1111 Australian. Was realy hard up for one afte seeing my brother in law's with a SR18DET. I'mm unfortunately changing the heart of the beast to Toyota, but keeping everything else Datsun as far as possible, with a bit of VW here and there. Thi is just a prefit for checking that everything will work. |
|
| A15 EFI Conversion
Clubman Fuel Injection 2006/7/12 18:33 Tell a friend
4357 5 0.00 (0 votes)
| Hi all thought you might like to see a pic of my EFI conversiom |
|
| A15 EFI Conversion
Clubman Fuel Injection 2006/7/12 18:31 Tell a friend
4536 4 0.00 (0 votes)
| Hi all thought you might like to see a pic of my EFI conversiom |
|
| hello from Lithuania
vipas Mechanical 2006/7/12 15:29 Tell a friend
5002 9 0.00 (0 votes)
|
| hello from Lithuania
vipas Mechanical 2006/7/12 15:21 Tell a friend
4731 6 0.00 (0 votes)
thats how she show before restoration
:)
|
|
| hello from Lithuania
vipas Mechanical 2006/7/12 14:14 Tell a friend
4652 1 0.00 (0 votes)
hello, my name is Vytautas, i am from Lithuania. it is engine of my datsun and i repair it by my self.
DATSUN CHERRY COUPE '81, N10, A12 |
|
| 2300 Supersix
super6 Misc 2006/7/12 13:16 Tell a friend
2288 0 0.00 (0 votes)
|
| 2300 Supersix
super6 Misc 2006/7/12 13:15 Tell a friend
2198 0 0.00 (0 votes)
|
| 2300 Supersix
super6 Misc 2006/7/12 13:14 Tell a friend
1942 0 0.00 (0 votes)
|
| 2300 Supersix
super6 Misc 2006/7/12 13:14 Tell a friend
2033 0 0.00 (0 votes)
|
| 2300 Supersix
super6 Misc 2006/7/12 13:08 Tell a friend
2091 0 0.00 (0 votes)
|
| Coupe console...Good nic...$30
Wattage Classifieds 2006/7/11 9:11 Tell a friend
2245 1 0.00 (0 votes)
| One is broken but I will include the trim from it. I didn't realise I fell on it and broke it when I went through the roof of the garden shed. |
|
| JB1200 Clutch master cylinder...BNIB....$40
Wattage Classifieds 2006/7/11 9:09 Tell a friend
2809 0 0.00 (0 votes)
| Perfect for converting a 1200 to hydraulic clutch. Brand new. |
|
| 1200 Ute tailshaft
Wattage Classifieds 2006/7/11 9:07 Tell a friend
2197 0 0.00 (0 votes)
| Straight from an 85 model with an A15...$70 |
|
| Toneau Cover....$80
Wattage Classifieds 2006/7/11 9:06 Tell a friend
1903 0 0.00 (0 votes)
| Good nic including support rod. |
|
| Chromies.....good/new tyres....$200
Wattage Classifieds 2006/7/11 9:04 Tell a friend
1844 0 0.00 (0 votes)
|
| Kangaroo Bag....Good working motor....$30
Wattage Classifieds 2006/7/11 9:03 Tell a friend
2231 0 0.00 (0 votes)
|
| Datsun 1000 Badge
Wattage Classifieds 2006/7/11 9:01 Tell a friend
1914 0 0.00 (0 votes)
| Datsun 1000 badge for sale...$30 ono |
|
| Fj20 det race 1200coupe engine bay
DogBoy69 Misc 2006/7/10 19:01 Tell a friend
3393 15 0.00 (0 votes)
| This is in the blue race coupe in my previous post |
|
| My Carbs with Linkages ad Manifold
chris1200t Engine 2006/7/10 17:02 Tell a friend
3269 0 0.00 (0 votes)
| Dual 40mm Solexs with all the linkages on just waiting for the engine to come back so i can hook em up and start tuning them in. |
|
| Wish I still had this 1k for door
DogBoy69 Misc 2006/7/10 13:48 Tell a friend
1970 6 0.00 (0 votes)
|
| Wish I still had this 1k for door
DogBoy69 Misc 2006/7/10 13:45 Tell a friend
1856 2 0.00 (0 votes)
| It had a12, down draft webber, 4 into 1 extractors and a locker. |
|
| Tyre Warm Up
DogBoy69 Misc 2006/7/9 12:49 Tell a friend
1692 0 0.00 (0 votes)
|
| Sunny at the first corner @ colling grove
DogBoy69 Misc 2006/7/9 12:48 Tell a friend
1689 0 0.00 (0 votes)
|
| Quality battery marker
DogBoy69 Misc 2006/7/9 12:47 Tell a friend
1887 3 0.00 (0 votes)
|
| 1200 in the que @ colling grove
DogBoy69 Misc 2006/7/9 12:44 Tell a friend
1945 5 0.00 (0 votes)
|
| Yellow 1200 coupe @ collin grove
DogBoy69 Misc 2006/7/9 12:40 Tell a friend
1780 0 0.00 (0 votes)
| This L18 with 1600 cross member and 240k struts |
|
| Fj20 det race 1200coupe
DogBoy69 Misc 2006/7/9 12:38 Tell a friend
2121 2 0.00 (0 votes)
| Coupe @ collin gorve hill climb |
|
| eoi on 1200 coupe
Turboute Misc 2006/7/9 12:19 Tell a friend
1749 0 0.00 (0 votes)
|
| eoi on 1973 auto 1200 coupe
Turboute Misc 2006/7/9 12:17 Tell a friend
2209 11 0.00 (0 votes)
Hi i just bought this coupe as a project but i have decided it is to good to pull apart as i have allready spent heaps and the money i wanted to spend would not do this shell justice.
everything is standard and imaculate you should see this car, I have had it a week know but the owner before me had it for 33 years and ive got his original sales docket from datsun there is 2 spots of rust the size of a 50 cent piece on the front guards. |
|
| whelel bearing seal
troublecomes Forum 2006/7/9 10:41 Tell a friend
2223 0 0.00 (0 votes)
|
| Motor Manual Jul 1970
ddgonzal Tech Section 2006/7/9 2:37 Tell a friend
2409 0 0.00 (0 votes)
| "Scoop - Driving Australian Datsun 1200 Coupe" |
|
| A15 fuel injected sunny @ colling grove
DogBoy69 Misc 2006/7/8 5:58 Tell a friend
2384 0 0.00 (0 votes)
|
| A15 fuel injected sunny @ colling grove
DogBoy69 Misc 2006/7/8 5:54 Tell a friend
3070 0  7.00 (1 vote)
|
| A15 fuel injected sunny @ colling grove
DogBoy69 Misc 2006/7/8 5:51 Tell a friend
1865 2 0.00 (0 votes)
|
| B310 E.F.I.
gx1200 Tech Section 2006/7/7 12:56 Tell a friend
4616 8 0.00 (0 votes)
| Here is a pic of my newley completed Quad throttle bodies on my sunny. Soon to be put in a 1000 |
|
| last one
cheater_5 cheater_5 2006/7/7 8:46 Tell a friend
1513 0 0.00 (0 votes)
| almost ready to store the castles. :P |
|
| more in daytime
cheater_5 cheater_5 2006/7/7 8:45 Tell a friend
1544 2 0.00 (0 votes)
|
| Some more in the daytime
cheater_5 cheater_5 2006/7/7 8:45 Tell a friend
1464 0 0.00 (0 votes)
Man i know what people mean by it sucks with no power stearing. It was fine before but with these mags its umm fun.
Still looks good, price you pay i guess.
Man i love these mags |
|
| a14
DatsunSSS Tech Section 2006/7/7 1:15 Tell a friend
2378 3 0.00 (0 votes)
|
| new goodies for the 1200
PIGDOG PIGDOG 2006/7/6 19:00 Tell a friend
3187 2 0.00 (0 votes)
my new 200b front end with cross drilled rotors and sumitomo twin piston calipers
and also my 6kg L series flywheel(down from about 17kg) and solid centre brass button clutch
and that is a big dirty 4 pot caliper at the back of the table |
|
| my 1200 coupe
short-coupe Members 2006/7/6 18:54 Tell a friend
3389 3 0.00 (0 votes)
|
| my 1200 coupe
short-coupe Members 2006/7/6 18:52 Tell a friend
2667 0 0.00 (0 votes)
|
| my 1200 coupe
short-coupe Members 2006/7/6 18:46 Tell a friend
3968 2 0.00 (0 votes)
| my LJ torana adjustable castor rod modded to suit 1200 |
|
| my 1200 coupe
short-coupe Members 2006/7/6 18:44 Tell a friend
2578 0 0.00 (0 votes)
|
| Wheels for sale
short-coupe Members 2006/7/6 18:01 Tell a friend
2719 4 0.00 (0 votes)
hi guys i don;t need these any more
make an other i'm in brisbane, 2 x 5.5" 2 x 6" both x 15" with 2 x 8" outers |
|
| my 1200 coupe
short-coupe Members 2006/7/6 17:53 Tell a friend
2915 4 0.00 (0 votes)
|
| my 1200 coupe
short-coupe Members 2006/7/6 17:48 Tell a friend
3028 7 0.00 (0 votes)
|
| my 1200 coupe
short-coupe Members 2006/7/6 17:44 Tell a friend
3779 15 0.00 (0 votes)
| here's finally a back pick of my coupe, if i get a photo album i have alot more, |
|
| new mags
cheater_5 cheater_5 2006/7/6 14:43 Tell a friend
1418 0 0.00 (0 votes)
Dirt as car from dirt roads. Back from a good day surfing. Pitty it was raining.
Speed star 15x6.5 i think. |
|
| testfit
cheater_5 cheater_5 2006/7/6 14:37 Tell a friend
1418 0 0.00 (0 votes)
Test fit of the mags. Just to show how it'll look soon. Cant wait :P
Sorry about the shit quality it was a mates camera. |
|
| magtackular
cheater_5 cheater_5 2006/7/6 14:21 Tell a friend
1569 0 0.00 (0 votes)
Speedstar xr-4s' on the datto wagon.
Had to fit 20mm spacers to the front but the back fitted fine. They are 15x6.5 i think.
Got dark before the backs were fitted but i nkow they'll fit no prob. might put spacers on to fill the gaurds anyway though.
The crappy side :( |
|
| ooo look at that...
cheater_5 cheater_5 2006/7/6 14:20 Tell a friend
1827 9 0.00 (0 votes)
Speedstar xr-4s' on the datto wagon.
Had to fit 20mm spacers to the front but the back fitted fine. They are 15x6.5 i think.
Got dark before the backs were fitted but i nkow they'll fit no prob. might put spacers on to fill the gaurds anyway though |
|
| Rotary transmission mount
JDUB Misc 2006/7/6 10:08 Tell a friend
3215 2 0.00 (0 votes)
| Picture of the tranny mounts I made for the 13b swap. |
|
| Pedal shift
JDUB Body and Interiors 2006/7/6 10:05 Tell a friend
2519 0 0.00 (0 votes)
| With the rotary and the massive tunnel I made I also had to shift the pedals to the left. I made the gas pedal, bent and welded the brake pedal. Still have to move the clutch. |
|
| New Tranny tunnel
JDUB Body and Interiors 2006/7/6 10:03 Tell a friend
2667 3 0.00 (0 votes)
| Here is the new tranny tunnel after being welded and sealed, will most likely get painted...sooner or later. |
|
| 13b motor mount
JDUB Engine 2006/7/6 10:01 Tell a friend
3595 8 0.00 (0 votes)
| Made it out of 4130, should hold up and stiffen the frame a little. |
|
| Auto Crank Spacer
Cable_Tie Cable_Tie 2006/7/6 3:43 Tell a friend
2137 0 0.00 (0 votes)
| The spacer on the right is removable. |
|
| more from Central America
MARCOANTONIO Engine 2006/7/6 2:19 Tell a friend
4383 6 0.00 (0 votes)
|
| more from Central America
MARCOANTONIO Engine 2006/7/6 2:18 Tell a friend
3463 0 0.00 (0 votes)
|
| more from Central America
MARCOANTONIO Engine 2006/7/6 2:16 Tell a friend
3757 0 0.00 (0 votes)
|
| more from Central America
MARCOANTONIO Misc 2006/7/6 2:14 Tell a friend
2163 0 0.00 (0 votes)
|
| more from central America
MARCOANTONIO Misc 2006/7/6 2:12 Tell a friend
1989 0 0.00 (0 votes)
|
| more from Central America
MARCOANTONIO Misc 2006/7/6 2:11 Tell a friend
2020 0 0.00 (0 votes)
|
| more from Central America
MARCOANTONIO Misc 2006/7/6 2:10 Tell a friend
1865 0 0.00 (0 votes)
|
| Rally 2006 - El Salvador
MARCOANTONIO Rally 2006/7/6 2:05 Tell a friend
1939 1 0.00 (0 votes)
|
| Rally 2006 El Salvador
MARCOANTONIO Rally 2006/7/6 2:03 Tell a friend
2046 0 0.00 (0 votes)
|
| Rally 2006 El Salvador
MARCOANTONIO Rally 2006/7/6 2:02 Tell a friend
1896 0 0.00 (0 votes)
|
| Rally 2006 El Salvador
MARCOANTONIO Rally 2006/7/6 2:01 Tell a friend
1986 0 0.00 (0 votes)
|
| L20 EFI
B120dat Misc 2006/7/5 13:06 Tell a friend
1799 0 0.00 (0 votes)
|
| Sedan 3
B120dat Misc 2006/7/5 13:05 Tell a friend
1703 0 0.00 (0 votes)
|
| sedan 2
B120dat Misc 2006/7/5 13:04 Tell a friend
1706 0 0.00 (0 votes)
|
| sedan 1
B120dat Misc 2006/7/5 13:03 Tell a friend
1644 0 0.00 (0 votes)
| For Sale. This is not my car for friend. |
|
| Sedan
B120dat Misc 2006/7/5 13:02 Tell a friend
1697 0 0.00 (0 votes)
|
| 1200 datto ute
Custom_Utes Classifieds 2006/7/5 10:55 Tell a friend
1975 0 0.00 (0 votes)
Datsun 1200 ute for sale in Brisbane, this is around a 1971, needs abit of work, but great for project, 1.2L motor in it but comes with a 2L unsure of 2L condition, + 5speed box, wheels + set of mags. tail shaft + box removed because was goin to build a custom set, but still hav them. yellow in color, it has rust, in tray floor, guards, quarter panels nd doors, can all be fixed easy, but have new parts for some of them for extra $$$, asking around $750
if interested plz email hanno13@hotkey.net.au
0r call 0415 427 656
Cheers
Brand new parts: front gaurds $115, bonnet $130, tail gate $120, tail lights $29, fibreglass door cards $30,
can give you numbers of shops who sell the rest.
|
|
| Harry's meet #8 - Red Ute DUMPED
Coops Meetings 2006/7/5 4:46 Tell a friend
3302 10 0.00 (0 votes)
| Oops... Sorry - Stuffed up that last 1 |
|
| Harry's meet #10 - Lineup 2
Coops Meetings 2006/7/5 4:34 Tell a friend
2786 0 0.00 (0 votes)
From another angle.
Still poor light. |
|
| Harry's meet #9 - Lineup 1
Coops Meetings 2006/7/5 4:33 Tell a friend
2708 0 0.00 (0 votes)
Good turnout for a Monday Night.
Apologies for the poor picture quality, the flash just couldn't cut it. |
|
| Harry's meet #8 - Red Ute DUMPED
Coops Meetings 2006/7/5 4:31 Tell a friend
3115 0 0.00 (0 votes)
|
| Harry's meet #7 - FJ20 510 Side
Coops Meetings 2006/7/5 4:30 Tell a friend
6128 9  1.00 (1 vote)
| This 1600 sss is one of the finest examples you're likely to see. |
|
| Harry's meet #6 - 1200U Engine Bay
Coops Meetings 2006/7/5 4:29 Tell a friend
3103 1 0.00 (0 votes)
| Tidy custom throttle body setup. |
|
| Harry's meet #5 - 1200U Rear
Coops Meetings 2006/7/5 4:20 Tell a friend
3154 1 0.00 (0 votes)
| Interesting to watch this parking with it's large rear tyres & mini-spool. |
|
| Harry's meet #4 - SR20 ute Engine Bay
Coops Meetings 2006/7/5 4:19 Tell a friend
4329 10 0.00 (0 votes)
| Well turned out engine bay w/ lots of polished alloy. |
|
| Harry's meet #3 - SR20 ute front
Coops Meetings 2006/7/5 4:17 Tell a friend
3055 0 0.00 (0 votes)
| The "SR18" ute got lots of attention |
|
| Harry's meet #2 - Toyota Ute Rear
Coops Meetings 2006/7/5 4:16 Tell a friend
3228 0 0.00 (0 votes)
| Note the tailgate handle. |
|
| Harry's meet #1 - Toyota Ute Front
Coops Meetings 2006/7/5 4:13 Tell a friend
3791 3  8.00 (1 vote)
Looked very similar to a 1200 ute.
Very tidy - Attracted a lot of attention. |
|
| B110 Handbrake Cable - Hanger Strap Detail
ddgonzal Brakes 2006/7/5 0:19 Tell a friend
2750 0 0.00 (0 votes)
| The flexible strap bolts to a loop-shaped bracket that is welded to the back of the diff housing. |
|
| B110 Handbrake Cable - Hanger Strap
ddgonzal Brakes 2006/7/5 0:17 Tell a friend
3066 0 0.00 (0 votes)
| The flexible piece (Hanger Strap) bolts to a loop-shaped bracket that is welded to the back of the diff housing. |
|
| B110 Handbrake Cable Diagram
ddgonzal Brakes 2006/7/5 0:15 Tell a friend
3495 0 0.00 (0 votes)
| RHD, LHD apparently the same |
|
| analog clock installed
HoCNgiap Misc 2006/7/4 21:59 Tell a friend
2299 5 0.00 (0 votes)
| did this when i was young! haha |
|
| dats green
scottalofigus Misc 2006/7/4 20:32 Tell a friend
2288 1 0.00 (0 votes)
| my hydro cluch master cylinder i had to fit for the skyline r30 stumpy gearbox. needed to knock out the firewall a bit to get a smooth bit of metal to bolt it up to. and the clutch peddle had to have a section of metal welded on to it just where the pedal starts to bend to meet up with the master cylender push rod |
|
| engine
scottalofigus Misc 2006/7/4 20:26 Tell a friend
2835 1 0.00 (0 votes)
| my L16/L18 with 32/36 carby side on, using the datsun 1600 radiator |
|
| saves loosing screws
dazzasute Tech Section 2006/7/4 19:05 Tell a friend
2711 7 0.00 (0 votes)
| I find this helpful especially when starting a big project. By the time you finish you have no idea which screw/bolt goes where. I got a heap of re-sealable sandwich bags along with a permanent marker. Problem solved! |
|
| welded up one of the bonnet vents
dazzasute Body and Interiors 2006/7/4 19:02 Tell a friend
2624 2 0.00 (0 votes)
| the other one will be done soon. Just had to put the bonnet on to see how it looked! I'm quite happy with it, plus it saves this section filling up with water when it rains. Heater now sucks air through holes under the fenders. |
|
