Main Menu

Home News Forum Photo Album Tech Wiki Downloads Web Links Polls FAQ Members Map

Fast Search

Slow Search

Advanced Search

Google Ad

Revision as of 22:39, 17 March 2016

Also see: Crossmember

1 Overview
2 Rubber Insulators
3 Brackets
4 B110 and B120
- 4.1 Early Engine Mounting
- 4.2 Late Engine Mounting
  - 4.2.1 1978 Revision
5 B10 Mounts
- 5.1 Late Engine Into Datsun 1000
6 B210 Mounts
7 B310 Mounts
8 Upgraded Insulators

Overview

Insulator> brackets>

Rubber Insulators

All interchangeable.

11223-H1000 INSULATOR-engine mounting, front [10 mm studs] $12.70 USD
11223-H5000 INSULATOR-ENGINE MOUNTING, FRONT 7510-8503 [8mm studs] 
11223-G1900 INSULATOR-ENGINE MOUNTING, FRONT 8504- [8mm studs]

Nissan Part Number 11223-G1900

11223-H1000

Brackets

B110 (1970-1973)
 album

Late 1200 (1974 on)
 album

B110 and B120

Front: 1970-1973 1200 engine tall crossmember (B110/B120)
album
Rear: 1974-up 1200 tall/short engine crossmember

Not only does the new-style engine have a lower mount, but the mounts are further back 35mm (~1-3/8"). These photos shows how far back:
album

full

Original B110 engine brackets:
right side (high-mount)

Two types of right-side brackets

Top: original style
Bottom: new style for revised crossmembers
- Allows fitment of reduction gear starters
- Starting with 1978 B210 USA (H8500)
- All B310 (H8500)
- Starting with 1985 B120 JDM (G1900)

NOTE: If you mix early engine with late crosmember (or vice-versa) you need some modifications. In this case see A-series Engine Swaps.

Early Engine Mounting

1970-1973 Datsun 1200

B110
album

11221-H1000 BRACKET-engine mounting, front (R.H.)

11222-H1000 BRACKET-engine mounting, front (L.H.)
- Stepped mounting. Lower boss is farther out than upper boss

Late Engine Mounting

1974 and up engines are different, and 1974-up 1200s use a corresponding crossmember

Engine Mounts dimensions

High side mount (similar to earlier)
11221-H5000 BRACKET-ENGINE MOUNTING, RH 7510-8503
11221-G1900 BRACKET-ENGINE MOUNTING, RH 8504-

Low side mount (new crossmembers)
11222-H5001 BRACKET-ENGINE MOUNTING, LH 7510-8503
* Same part for 74-up B120 (ute), B210 and B310
  
11222-G1900 BRACKET-ENGINE MOUNTING, LH 8504-

1978 Revision

1978 Reduction Gear Starter modification

B10 Mounts

As you can see these are different from newer (B110, etc) mounts.

11223-18001 INSULATOR-engine mounting front

qik1000 used Ford Laser mounts

Custom engine mounts to suit A14/A15. I used new ford laser upper engine mounts, which are significantly larger/stiffer than the originals. This eliminates axle tramp.

1985-1990 BD/BF Mazda 323, KA/KB Ford Laser Rear Engine Mount (spacing varies from B10 mount)

11121-18000 BRACKET-engine mounting front (R.H.) 
* stepped bracket - looks similar to B110 LH bracket

11122-18000 BRACKET-engine mounting front (L.H.) 
* flat (unstepped) bracket

Late Engine Into Datsun 1000

For putting a 1974-up engine into a B10, see Chris's Rip Snorter A12 & Red B10

B210 Mounts

11223-H5000 INSULATOR-ENGINE MOUNTING FRONT V [? mm studs]
11223-H7500 INSULATOR-ENGINE MOUNTING FRONT [except] V [10 mm studs]
11223-H7300 INSULATOR-ENGINE MOUNTING FRONT USA 0974- 
* [10 mm studs, A14 engine softer mounts] $30.47 USD
* replaces 11223-H7500
* replaces 11223-H6100 INSULATOR-ENGINE MOUNTING FRONT USA -0874 
  [? mm studs, A13 engine harder mounts]

11221-H7301 BRACKET-ENGINE MOUNTING, FRONT RH
* USA -0777
USA 11221-H5000 BRACKET-ENGINE MOUNTING FRONT RH -0874
 
USA 11121-H7300 BRACKET-ENGINE MOUNTING FRONT RH 0974-1074
USA 11221-H8500 BRACKET-ENGINE MOUNTING FRONT RH 0877-
* Bracket notched for Reduction Gear Starter?

11222-H5001 BRACKET-ENGINE MOUNTING, FRONT LH

Right-side mount comparison:

Middle pair is B110 early, right is B210? (thin), left is B310? (thick)

B210 crossmember change for 1978 North America

Crossmember horns are farther apart, requiring new style RH bracket
B310 uses this new spacing

B310 Mounts

The B310 insulators have a metal wrap in case the rubber breaks, the engine won't move too far.

11223-H9100 INSULATOR-ENGINE MOUNTING FRONT RH [10 mm studs] $34.38 USD
11224-H9100 INSULATOR ASSY-ENGINE MOUNTING FRONT LH $44.32 USD
*

B310 insulators have a larger studs and locating pins, but otherwise are the same dimensions as B110 mounts.

11221-H8500 BRACKET-ENGINE MOUNTING, FRONT RH

Stronger, more rigid than ever - perhaps to reduce NVH (noise, vibration and harshness)

11222-H5001 BRACKET-ENGINE MOUNTING, FRONT LH
* Same as B210 and mid-model B120

Left and Right together

Upgraded Insulators

Universal puck-style mounts, in rubber or polyurethane
post

These are the heavy duty engine mounts we were talking about. Broken engine mounts are a common thing in rally cars and this fixes the problem. Mounts are polyurethane and come out of a ford cortina and last for years of competition...Part number MT8156N. Kelpro make them...I usually just go to a good parts place and ask for cortina engine mounts and this is what they give me. Maybe there are two types, these are about 70mm in dia.

album

quote: you might want to look at the poly-urathene style mounts. I am using some of a Jag. The part number is at home. but they are heaps wider but no tallers, so they make a good direct replacement, plus they are high temp rated.

CA-style/B310-style
post