| New tank fitted
 kululadotgroen  Misc  2007/8/25 23:36  Tell a friend
 2451  0  0.00 (0 votes)
| Yes, yes, I will be making proper brackets for the filter and pump. This was just a quick Wednesday afternoon bungle to see that it will work. Now I can see how much fuel I have left, and don't have to constantly open the boot o check... The fitting is the same one I used on the other tank. It has steel and rubber seals, and I got the nut on the inside using a brazing rod and then a socket with a u-joint. The left hand vent now serves as the fuel return, and the old pickup was blocked off. |
|
| New tank's level sensor
kululadotgroen Misc 2007/8/25 23:31 Tell a friend
1875 0 0.00 (0 votes)
| The top one was my old one, and it was already brushed with a wire brush, just shows how clean and new the one is I got now. |
|
| New tank found
kululadotgroen Misc 2007/8/25 23:29 Tell a friend
1659 0 0.00 (0 votes)
| On my last run someone asked me where my rear window was, I said it blew out, and that I couldn't find one. He pointed me to someone, and said that he has one, I went and got it from him, and he also had this tank for me. Looks like new inside, no rust or anything... |
|
| And her gloating like one should...
kululadotgroen Misc 2007/8/25 23:27 Tell a friend
1870 0 0.00 (0 votes)
She's thoroughly hooked now, and wants to know when the next meet is(next Friday, which will also be timed), and demands to have a go at it, at every opportunity. Who am I to complain, nothing better than having your wife involved, and not questioning any upgrades... |
|
| What she got for being fastest...
kululadotgroen Misc 2007/8/25 23:24 Tell a friend
1611 0 0.00 (0 votes)
| .. Rule number one when racing, never let someone else drive your car...*aaarrrggghhh* |
|
| The missus on her way...
kululadotgroen Misc 2007/8/25 23:22 Tell a friend
1859 2 0.00 (0 votes)
| ...to taking fastest lady for the day... |
|
| Returning from a run...
kululadotgroen Misc 2007/8/25 23:20 Tell a friend
1797 0 0.00 (0 votes)
| They initially put me in the 2L turbo class, but luckily someone noticed, and I was put in the right class. I had he last number, DT11(class D, 1.6 - 2.0 Turbo, car 11), but came 4th, which I'm more than happy with... Notice the loud pipe sticking out from under the passenger door...*hehehe* |
|
| Waiting for my last run
kululadotgroen Misc 2007/8/25 23:16 Tell a friend
1925 2 0.00 (0 votes)
| This guy took 3rd place in our class, with a 206 on 12psi into a turbo'd 4AGZE. I was 4th with 200, on 8psi, but running out of steam as my counter was reading 7.3k at the 800, and I limit at 7.5. Looking for a LS M75 Toyota diff, and will be doing a dyno with some 102.6 and 13psi+ soon. I want a place in the top 3 next time round. |
|
| And for the missus...
kululadotgroen Misc 2007/8/25 23:01 Tell a friend
1678 0 0.00 (0 votes)
| ...ye, she suggested that she has a go, and I encouraged her... Coached her a bit, not so hard in 1st, little bit more in 2nd(otherwise the tail gets loose), and nail it from 3rd onwards. She even granny shifted, none of that cowboy snap changing stuff... We were well and truly surprised when the speeds were called out... |
|
| Race results...
kululadotgroen Misc 2007/8/25 22:57 Tell a friend
1670 1 0.00 (0 votes)
| ...unfortunately no times, only speed. I was chuffed anyway, seeing as the best a guy with his new M5 could do was 191 over the 800. I ran it with only a piece of pipe sticking out from under the left front door, made a hell of a noise, but the boost came on much earlier, and also much smoother... |
|
| Very old pic of myself...
kululadotgroen Misc 2007/8/25 22:53 Tell a friend
2102 3 0.00 (0 votes)
| With my cousins 1400 bakkie in the background. He eventually rolled it, they were 4 in the cab at the time, on their way home, none of them got injured to badly, only scratches and stuff... The fish are carp and barbel, and was my catch for the previous night... |
|
| Green 4
2332owner 2332owner 2007/8/25 13:29 Tell a friend
3196 0 0.00 (0 votes)
|
| Green 3
2332owner 2332owner 2007/8/25 13:29 Tell a friend
3345 2 0.00 (0 votes)
|
| Green 2
2332owner 2332owner 2007/8/25 13:28 Tell a friend
2829 0 0.00 (0 votes)
|
| the interior of The Defect III
Mawler1 Misc 2007/8/25 10:38 Tell a friend
1724 0 0.00 (0 votes)
| this is a wider angle photo than the first one |
|
| the interior of The Defect III
Mawler1 Misc 2007/8/25 10:32 Tell a friend
1477 0 0.00 (0 votes)
this is the interior of TD3
totally different from before |
|
| back seat of TD3
Mawler1 Misc 2007/8/25 10:24 Tell a friend
1887 0 0.00 (0 votes)
| this is the back seat of TD3 - notice the Seatbelts... |
|
| the interior of The Defect III
Mawler1 Misc 2007/8/25 10:07 Tell a friend
1481 0 0.00 (0 votes)
this is the interior of The Defect III!
theres alot more in there now! |
|
| another pic
possum1200 Misc 2007/8/24 9:13 Tell a friend
1614 0 0.00 (0 votes)
| another close up pic of wheels |
|
| pic of ssr mesh 3 piece wheels for sale
possum1200 Misc 2007/8/24 9:09 Tell a friend
2219 2 0.00 (0 votes)
as above if interested pm offers, they are 15x6 +20 offset they were recently sandblasted and powder coated gunmetal, i hand polishd the hoops and wire wheeled bolts and washers then painted.
do not come with tyres |
|
| da dats
perthute Misc 2007/8/24 8:14 Tell a friend
1925 0 0.00 (0 votes)
|
| cruze 19 8 07
perthute Misc 2007/8/24 7:59 Tell a friend
1701 1 0.00 (0 votes)
|
| Another 13B Rotor in a Nissan Bakkie
Velociti Misc 2007/8/24 6:50 Tell a friend
3090 4 0.00 (0 votes)
This one was built by decently.
|
|
| 13B rotor in a nissan bakkie
Velociti Misc 2007/8/24 6:47 Tell a friend
2886 8 0.00 (0 votes)
Its got a mean exhaust note.
The firewall was not cut very neatly thought. |
|
| 13's
wolki101 Misc 2007/8/24 1:42 Tell a friend
2221 1 0.00 (0 votes)
| the 13's suit it better than the 16's i reckon. |
|
| 1600 Coupe
Velociti Misc 2007/8/23 14:18 Tell a friend
2254 7 0.00 (0 votes)
|
| 4 sale
flydato Misc 2007/8/23 12:18 Tell a friend
1996 0 0.00 (0 votes)
|
| o4 sale
flydato Misc 2007/8/23 12:09 Tell a friend
1653 0 0.00 (0 votes)
|
| L18's old HR30 coupe
L18_B110 L18_B110 2007/8/23 9:19 Tell a friend
1951 0 0.00 (0 votes)
| just before I sold it (Jan 2007). I miss this car and my old 1000 coupe... why do I sell these things? |
|
| back seat idea
spenc Forum 2007/8/23 8:06 Tell a friend
1665 3 0.00 (0 votes)
| heres a pick of the back seat idea for my 1200 coupe only problemn is where am i gonna put the harnesse might have to move the bar forwad |
|
| New Recaro seats 2
Velociti Misc 2007/8/23 5:52 Tell a friend
1912 1 0.00 (0 votes)
| These make one hell of a differance to this UTE |
|
| New Recaro seats
Velociti Misc 2007/8/23 5:51 Tell a friend
3176 10 0.00 (0 votes)
| Damb these things are comfy. |
|
| B310 datsun from malaysia
area_a15 Misc 2007/8/21 20:20 Tell a friend
1973 3 0.00 (0 votes)
|
| datsun from malaysia
area_a15 Track 2007/8/21 20:17 Tell a friend
2586 2 0.00 (0 votes)
| B310. A15, rear full locked, drift spec. |
|
| 1200 bumper
DatsunSSS Misc 2007/8/21 18:45 Tell a friend
2224 4 0.00 (0 votes)
|
| Green
2332owner 2332owner 2007/8/21 14:59 Tell a friend
6657 12 0.00 (0 votes)
| Too cloudy to really see the color or the flames but you can get the idea a little. |
|
| been busy
IAMDVS Misc 2007/8/21 13:59 Tell a friend
1792 1 0.00 (0 votes)
| well cleaned up the in side of the tray |
|
| two toned datto. very tidy
datto_1200_SSS Members 2007/8/21 9:55 Tell a friend
2269 0 0.00 (0 votes)
| nice datsun 1200 i saw at beach hop i ened up going for a road trip with him in my 1200 sss and was a great trip. |
|
| datsun 1200 sss (back)
datto_1200_SSS Members 2007/8/21 9:31 Tell a friend
2300 0 0.00 (0 votes)
|
| my datto sss
datto_1200_SSS Members 2007/8/21 9:30 Tell a friend
2631 6 0.00 (0 votes)
| fully restored. new paint 4months ago original everything including wheels |
|
| newbies new ute
utesrock Misc 2007/8/20 18:55 Tell a friend
2073 4 0.00 (0 votes)
| I bought this last week .78 000ks.one owner. 76 mod. with reg stock never touched..did i do allright ??? what do you think its worth ???? |
|
| i know this is a datto site but check this out
spenc Misc 2007/8/20 13:54 Tell a friend
3947 61 0.00 (0 votes)
i was looking on living low customs the other and i seen this made cruiser on bags
man some of the stuff peaple do |
|
| P-NUT at sunset
K-DOGG Misc 2007/8/20 9:52 Tell a friend
1751 1 0.00 (0 votes)
| finally back from the suspension shop! they did a kick ass job. stanza frontend,adjustable king springs and strut tops, now its all brand new underneath. |
|
| Clock Wiring
ddgonzal Tech Section 2007/8/20 8:22 Tell a friend
3046 1 0.00 (0 votes)
|
| Instrument panel wiring
ddgonzal Tech Section 2007/8/20 8:04 Tell a friend
3757 0 0.00 (0 votes)
From service manual 1972 model USA
The clock actually uses different color wires.
My 1200 harness had the two B/W tachometer wires. |
|
| Shift diagram - Coupe
ddgonzal Engine 2007/8/19 13:51 Tell a friend
2363 0 0.00 (0 votes)
|
| Dyno chart
ddgonzal Engine 2007/8/19 13:32 Tell a friend
3494 1 0.00 (0 votes)
Bottom line is Fuel Rate Consumption Ratio.
From Salesman Book, 1970 |
|
| Cooler (air conditioning)
ddgonzal Body and Interiors 2007/8/19 12:07 Tell a friend
2887 0 0.00 (0 votes)
Left: Sunny 1200
Right: Previous/Existing
From Salesman Book, 1970 |
|
| Seats
ddgonzal Body and Interiors 2007/8/19 11:54 Tell a friend
2426 0 0.00 (0 votes)
Top: Tricot, GL trim (Coupe?)
Bottom: rear sedan, DX trim
From Salesman Book, 1970 |
|
| VB110 4-dr Wagon
ddgonzal Body and Interiors 2007/8/19 11:42 Tell a friend
2698 0 0.00 (0 votes)
|
| 1200 Options: Tail pipe extension
ddgonzal Body and Interiors 2007/8/19 11:31 Tell a friend
2332 0 0.00 (0 votes)
| Chrome! From Salesman Book, 1970 |
|
| Progress
2332owner 2332owner 2007/8/18 21:33 Tell a friend
3591 15 0.00 (0 votes)
| The gunmetal is final for the top of the truck but the copper color and gunmetal flames will get covered with green house of kolor kandy within the next couple days. Then... reassembly! |
|
| Flames
2332owner 2332owner 2007/8/18 21:31 Tell a friend
2216 0 0.00 (0 votes)
|
| the thouee rear
Ianey Ianey 2007/8/18 19:42 Tell a friend
2265 0 0.00 (0 votes)
|
| Datsun 1000 ute
zunk1000 Body and Interiors 2007/8/18 16:35 Tell a friend
1864 0 0.00 (0 votes)
| this is my ute i have had it for 2 years and i am going to do the engine up after i finish my rx7 |
|
| Thousand alloy Brown Davis cage for sale
Ianey Classifieds 2007/8/18 15:43 Tell a friend
2134 5 0.00 (0 votes)
| It is is a Brown Davis half cage and has all the bolts, etc necessary to bolt in. It just requires 8 holes to be drilled. It was cams certified in my car, but cannot be certified now as the rules have changed, although it is fine for most club events. |
|
| Building the kb10 cage 4
Ianey Ianey 2007/8/18 15:39 Tell a friend
2066 0 0.00 (0 votes)
| This is almost the finisehd product. It just has to be all welded up now. There is also an under-dash bar but it cant go in yet. |
|
| Building the kb10 cage 3
Ianey Ianey 2007/8/18 15:38 Tell a friend
2300 2 0.00 (0 votes)
| My friend Wes helping me to build the cage in the thouee |
|
| Building the kb10 cage 2
Ianey Ianey 2007/8/18 15:37 Tell a friend
1456 0 0.00 (0 votes)
| My friend Wes helping me to build the cage in the thouee |
|
| Building the kb10 cage
Ianey Ianey 2007/8/18 15:35 Tell a friend
1458 0 0.00 (0 votes)
| My friend Wes helping me to build the cage in the thouee |
|
| Launching
fj1200 Misc 2007/8/18 14:34 Tell a friend
1652 0 0.00 (0 votes)
|
| FINISHED!
Burke_a_lot Misc 2007/8/18 13:59 Tell a friend
2410 1 0.00 (0 votes)
|
| MORE NITRO CHAMP,S
1200post Drag 2007/8/18 12:26 Tell a friend
2756 6 0.00 (0 votes)
|
| NITRO CHAMPS
1200post Drag 2007/8/18 12:21 Tell a friend
2476 1 0.00 (0 votes)
|
| NITRO CHAMPS SYDNEY AUSTRALIA
1200post Forum 2007/8/18 11:10 Tell a friend
1379 0 0.00 (0 votes)
| RIPPING IT UP AT THE NITRO CHAMPS IN MAY THIS YEAR PLACED 3rd OUT OF 24 V8 NOT BAD FOR A 4cc DATSUN |
|
| NITRO CHAMPS SYDNEY AUSTRALIA
1200post Forum 2007/8/18 11:10 Tell a friend
1447 0 0.00 (0 votes)
| RIPPING IT UP AT THE NITRO CHAMPS IN MAY THIS YEAR PLACED 3rd OUT OF 24 V8 NOT BAD FOR A 4cc DATSUN |
|
| a14 120y
DatsunSSS Misc 2007/8/17 21:31 Tell a friend
1862 2 0.00 (0 votes)
i think i need a 5th gear.
|
|
| A14 head--728-402
DatsunSSS Tech Section 2007/8/17 20:13 Tell a friend
2521 0 0.00 (0 votes)
|
| A14 head--728-402
DatsunSSS Tech Section 2007/8/17 20:13 Tell a friend
2663 0 0.00 (0 votes)
|
| 17'' wheels suit datsun 1200 ute
Demo Wheels 2007/8/17 15:26 Tell a friend
2223 0 0.00 (0 votes)
17'' wheels
205 45 17 rubber
multi stud |
|
| Launching
fj1200 Misc 2007/8/17 10:05 Tell a friend
1715 0 0.00 (0 votes)
Eastern Creek Wednesday night
15/8/07 |
|
| my good by picture
rb20 rb20 2007/8/16 13:23 Tell a friend
3547 9 0.00 (0 votes)
|
| Project Fatsun
K-DOGG Misc 2007/8/15 20:33 Tell a friend
2741 6 0.00 (0 votes)
| hopefully i can start on this by xmas. gotta find the lhf and rhr flares yet,then get some 205s for the front,i already have some 235s for the back. i also have a nifty boot badge thats part fairlane,part datsun1200. |
|
| Suzuka DRIFT
sunny_coupe110 Racing 2007/8/15 19:30 Tell a friend
4038 11 0.00 (0 votes)
|
| new stoppers
ANGE Other 2007/8/13 21:53 Tell a friend
4002 14 0.00 (0 votes)
| 250mm vented discs and calipers from an s13. |
|
| close up of A pillar plate
Quinn Quinn 2007/8/13 20:07 Tell a friend
2727 3 0.00 (0 votes)
| Pic of A pillar plate work for WhiteSedan, sorry about the quality had to zoom and crop another image as I didn't have a close up. Hope you get the idea. |
|
| carbys 05
Dartgun Misc 2007/8/13 16:38 Tell a friend
1586 0 0.00 (0 votes)
|
| carbys 04
Dartgun Misc 2007/8/13 16:38 Tell a friend
1576 0 0.00 (0 votes)
|
| carbys 03
Dartgun Misc 2007/8/13 16:38 Tell a friend
1472 0 0.00 (0 votes)
|
| carbys 02
Dartgun Misc 2007/8/13 16:37 Tell a friend
1390 0 0.00 (0 votes)
|
| carbys 01
Dartgun Misc 2007/8/13 16:37 Tell a friend
1418 0 0.00 (0 votes)
|
| Diff nearing completion
Quinn Quinn 2007/8/13 8:33 Tell a friend
2826 4 0.00 (0 votes)
|
| cage progress, trick front hoop setup
Quinn Quinn 2007/8/13 8:32 Tell a friend
2711 7 0.00 (0 votes)
| This is the front hoop, it goes through the base-plate on the floor and ties into the chassis rails. Should add a bit more strength into the car. |
|
| cage progress, rear half
Quinn Quinn 2007/8/13 8:29 Tell a friend
2908 9 0.00 (0 votes)
| the rear half of the cage |
|
| cage progress, front angle
Quinn Quinn 2007/8/13 8:27 Tell a friend
2546 3 0.00 (0 votes)
| Cage is tied in pretty well with the bracing to the a pillar, sill bar and seam welded to the rear arches on top of the standard plates. |
|
| Cage progress, another angle
Quinn Quinn 2007/8/13 8:22 Tell a friend
2093 0 0.00 (0 votes)
| there are lot of bars in my 1200 now. |
|
| cage progress
Quinn Quinn 2007/8/13 8:21 Tell a friend
2250 3 0.00 (0 votes)
|
| Cage progress
Quinn Misc 2007/8/13 8:20 Tell a friend
1553 0 0.00 (0 votes)
|
| It appeared in an import tuner magazine.
kuni Drag 2007/8/13 1:41 Tell a friend
3610 2 0.00 (0 votes)
|
| I changed a rear wheel.
kuni Wheels 2007/8/13 1:32 Tell a friend
2967 1 0.00 (0 votes)
|
| drift
kuni Racing 2007/8/13 1:28 Tell a friend
3026 0 0.00 (0 votes)
| It is a drifting photograph. |
|
| 1200 fibreglass boot skin inside
120fly Forum 2007/8/12 20:20 Tell a friend
2786 9 0.00 (0 votes)
| just anther pic of the inner skin 4 the fibre glass boot |
|
| 1200 fibreglass boot skin inside
120fly Forum 2007/8/12 20:18 Tell a friend
1595 0 0.00 (0 votes)
| now just gotta join it and fit it up |
|
| fibreglass 1200 boot skin inside
120fly Forum 2007/8/12 20:17 Tell a friend
1802 0 0.00 (0 votes)
|
| Steering column bush
ddgonzal Suspension 2007/8/12 17:40 Tell a friend
3365 15 0.00 (0 votes)
| Here's a fix for the loose steering column which every 1200 now seems to have after 30 years... a polyethylene bushing. Sorry I didn't get a better pic. |
|
| White Zombie's new roll cage
ddgonzal Suspension 2007/8/12 16:12 Tell a friend
2644 2 0.00 (0 votes)
| six-pointer for a little extra stiffness. A roll cage is required now since he is in the 11-second 1/4 mile times now. |
|
| Columbia River, 2007 - 1200 2-dr Sedan
ddgonzal ddgonzal 2007/8/12 16:09 Tell a friend
1925 0 0.00 (0 votes)
| On the way home from Blue Lake, which is just south of the Columbia River. |
|
| High-Castor setting - Gary P's autocrosser
ddgonzal Suspension 2007/8/12 16:05 Tell a friend
2046 2 0.00 (0 votes)
| 7 degrees castor -- at full lock results in a lot of negative camber |
|
| Datsun 1200 Tachometer
ddgonzal Body and Interiors 2007/8/12 16:03 Tell a friend
2394 5 0.00 (0 votes)
| Anyone recognize this tacho? I'm thinking it is from a 620 Datsun pickup. |
|
| A12T induction system
ddgonzal Engine 2007/8/12 16:01 Tell a friend
3156 4 0.00 (0 votes)
| Blue Lake 2007 - engine of 1st Place Datsun 1200. This is the A12T setup (B210 twin-carb engine). Notice the post-1973 flat-top Hitachis. |
|
