| resoration.
 RyandeRoo  Meetings  2011/10/24 15:57  Tell a friend
 1854  4  0.00 (0 votes)
|
| HD piston dome shape
jmac Engine 2011/10/22 11:26 Tell a friend
1410 0 0.00 (0 votes)
| pic of possible flat top piston as in discussion thread, including mspaint edits by me to illustrate piston crown thickness, piston compression height, and machining which might be done to alter the dome shape or remove it alltogether |
|
| The wannabee
mintzer1 Body and Interiors 2011/10/20 18:08 Tell a friend
1290 1 0.00 (0 votes)
|
| IMGP6630.jpg
mintzer1 Body and Interiors 2011/10/20 18:00 Tell a friend
1137 0 0.00 (0 votes)
|
| IMGP6629.jpg
mintzer1 Body and Interiors 2011/10/20 18:00 Tell a friend
1178 0 0.00 (0 votes)
|
| IMGP6622.jpg
mintzer1 Body and Interiors 2011/10/20 17:59 Tell a friend
1157 0 0.00 (0 votes)
|
| IMGP6620.jpg
mintzer1 Body and Interiors 2011/10/20 17:59 Tell a friend
1402 4 0.00 (0 votes)
|
| IMGP6621.jpg
mintzer1 Body and Interiors 2011/10/20 17:57 Tell a friend
1417 3 0.00 (0 votes)
|
| 1973 Datsun 1200 coupe
mintzer1 Body and Interiors 2011/10/20 17:49 Tell a friend
919 0 0.00 (0 votes)
|
| 1973 Datsun 1200 coupe
mintzer1 Body and Interiors 2011/10/20 17:46 Tell a friend
914 0 0.00 (0 votes)
|
| granny 120Y
K-DOGG Historic 2011/10/18 1:46 Tell a friend
1665 1 0.00 (0 votes)
| Just bought this sweet 120Y to get me around while both other cars are broken,still have not got my L18 back and the Impala just blew a head gasket.It was owned by a little old lady and has almost 17000kms on the clock,the tires are perished,so on go some 13s for now.Still has original tool kit,jack etc in the boot,a 1981 guide to lawn bowls clubs in WA with the log book/owners manual in the glove box,new radiator,original plug leads,yuk! Its clean and tidy but has little bits of rust here and there as it lived in the seaside town of Yanchep. Drives mint but nothing to listen to but talkback radio on the AM radio. Unfortunately the clock dosen't work,but i think i have a tacho dash somewhere here.It will be up for sale when my other cars are back on the road in the next few months.(and then ill break em again and have to buy another one!) |
|
| KB10 Guard Mirrors
SharmCos Forum 2011/10/16 17:38 Tell a friend
1944 2 0.00 (0 votes)
| KB10 guard mirrors. An option? Haven't seen many of these. |
|
| A series car club, Perth.
levey levey 2011/10/16 14:59 Tell a friend
1286 0  10.00 (1 vote)
The amasingly perfect 68 B10 engine bay.
I cannot find the rest of the pics on my cameras hard drive :(
Time for a new camera. |
|
| All Jap car day, Perth
levey levey 2011/10/16 14:43 Tell a friend
1839 3 0.00 (0 votes)
| The A series car club... Well half of them were there... |
|
| Vintage Race LVMS 10/9
Rallytwit Track 2011/10/15 23:31 Tell a friend
1765 1 0.00 (0 votes)
This is from a vintage race on 10/9/11...............33 cars in the group. The Volvo ahead of me made contact with another car and so he was done.
Tom |
|
| 1200post racing
1200post Members 2011/10/7 9:39 Tell a friend
1185 1 0.00 (0 votes)
|
| I went wrong the drift
Lora74 Body and Interiors 2011/10/7 3:01 Tell a friend
1467 1 0.00 (0 votes)
|
| jambo 2011
travo_6t9 Wallpapers 2011/10/5 10:50 Tell a friend
2537 7 0.00 (0 votes)
| thought id post a pic of my car at jambo. didnt expect it to do this but was good fun! |
|
| Datsun Land counting game
LittleFireyOne Ads 2011/9/29 9:53 Tell a friend
3311 5 10.00 (1 vote)
Trawling through my new bluebird (one owner 84' Ventura wagon) I came across this business card. It's funny cos now they sell crap cars.
How many models can you see? I can spy a 120Y and 1200 ute or example but I'll leave the rest out |
|
| V6
StealthUnderRadar Engine 2011/9/27 10:35 Tell a friend
2400 6 0.00 (0 votes)
|
| WATANABE MARK
webbs1200 webbs1200 2011/9/23 2:10 Tell a friend
1963 0 0.00 (0 votes)
|
| WATANABE WHEEL
webbs1200 webbs1200 2011/9/23 2:09 Tell a friend
1774 0 0.00 (0 votes)
|
| WATANABE WHEELS FOR MY 1200
webbs1200 webbs1200 2011/9/23 2:09 Tell a friend
1942 0 0.00 (0 votes)
|
| on the floor.
Dion120Y Misc 2011/9/19 12:41 Tell a friend
2394 0 0.00 (0 votes)
| gonna have to drop mine on the ground |
|
| 120why, my first car.
Dion120Y Misc 2011/9/19 12:40 Tell a friend
2041 1 0.00 (0 votes)
|
| pile of parts
pepper pepper 2011/9/18 5:47 Tell a friend
1792 0 0.00 (0 votes)
| pile of parts to be sorted |
|
| new shed
pepper pepper 2011/9/18 5:46 Tell a friend
1608 0 0.00 (0 votes)
|
| coupe home again
pepper pepper 2011/9/18 5:45 Tell a friend
1723 0 0.00 (0 votes)
|
| Standard-pattern shift knob (side view)
ddgonzal Drive Train 2011/9/16 4:47 Tell a friend
1402 0 0.00 (0 votes)
|
| Standard-pattern shift knob
ddgonzal Drive Train 2011/9/16 4:46 Tell a friend
1283 0 0.00 (0 votes)
|
| 1400 SGX E emblem
ddgonzal Fuel Injection 2011/9/16 4:40 Tell a friend
1679 0 0.00 (0 votes)
|
| NAPS-A
ddgonzal Docs 2011/9/16 4:20 Tell a friend
1655 0 0.00 (0 votes)
|
| S600 rear view
Hondagirl Historic 2011/9/14 11:33 Tell a friend
1566 0 0.00 (0 votes)
|
| S600 front view
Hondagirl Historic 2011/9/14 11:32 Tell a friend
1624 0 0.00 (0 votes)
|
| S600 side view
Hondagirl Historic 2011/9/14 11:31 Tell a friend
1637 1 0.00 (0 votes)
|
| chin spoiler
wayovermyhead Body and Interiors 2011/9/14 6:56 Tell a friend
1509 2 0.00 (0 votes)
|
| Logo
Fandatstick Ads 2011/9/9 11:34 Tell a friend
1590 0 0.00 (0 votes)
|
| tanks
tommo73 Misc 2011/9/9 7:09 Tell a friend
2339 3 10.00 (1 vote)
| oil catch can for mildmans coupe |
|
| tanks
tommo73 Mildman 2011/9/9 7:07 Tell a friend
2011 4 0.00 (0 votes)
|
| tanks
tommo73 Mildman 2011/9/9 7:06 Tell a friend
1631 0 0.00 (0 votes)
| tanks i made for mildmans coupe |
|
| tanks
tommo73 Members 2011/9/9 7:03 Tell a friend
1683 4 0.00 (0 votes)
| tanks i made for mildmans coupe |
|
| My 1972 Datsun 1200 Coupe
webbs1200 webbs1200 2011/9/8 22:47 Tell a friend
1893 0 0.00 (0 votes)
|
| Webb Racing
webbs1200 webbs1200 2011/9/8 22:46 Tell a friend
1790 0 0.00 (0 votes)
|
| Sumitomo MK63 Both Front Calipers
webbs1200 webbs1200 2011/9/8 22:45 Tell a friend
2899 5 0.00 (0 votes)
|
| Sumitomo MK63 Caliper Banjo Fittings
webbs1200 webbs1200 2011/9/8 22:44 Tell a friend
1981 0 0.00 (0 votes)
|
| Sumitomo MK63 Front Caliper Piston
webbs1200 webbs1200 2011/9/8 22:43 Tell a friend
1746 0 0.00 (0 votes)
|
| Sumitomo MK63 Front Caliper on the front of my 1200
webbs1200 webbs1200 2011/9/8 22:42 Tell a friend
2140 0 0.00 (0 votes)
|
| Sumitomo MK63 Front Caliper Bolts
webbs1200 webbs1200 2011/9/8 22:41 Tell a friend
1517 0 0.00 (0 votes)
|
| Sumitomo MK63 Front Brake Pads M59S
webbs1200 webbs1200 2011/9/8 22:40 Tell a friend
1439 0 0.00 (0 votes)
|
| Sumitomo MK63 Front Brake Pads M59S
webbs1200 webbs1200 2011/9/8 22:39 Tell a friend
1239 0 0.00 (0 votes)
|
| Sumitomo MK63 Front Brake Pads
webbs1200 webbs1200 2011/9/8 22:37 Tell a friend
1293 0 0.00 (0 votes)
|
| MK63 Caliper Rebuild Kits
webbs1200 webbs1200 2011/9/8 22:23 Tell a friend
1312 0 0.00 (0 votes)
|
| jdmst meet
12004lyf Members 2011/9/6 9:21 Tell a friend
1653 3 0.00 (0 votes)
|
| A12 Turbo Dyno Graph 175Kpa
sikyne Engine 2011/9/4 1:25 Tell a friend
2487 2 0.00 (0 votes)
|
| 44MM Mikuni/Solex Induction System 16010-M0820
ddgonzal Engine 2011/8/25 5:26 Tell a friend
2567 1 0.00 (0 votes)
From the 1984 Nissan Competition catalog.
Note the Nissan Cherry part number.
See Mikuni PHH |
|
| 40MM Mikuni/Solex Induction System 16010-H2310
ddgonzal Engine 2011/8/25 5:24 Tell a friend
2062 0 0.00 (0 votes)
From the 1984 Nissan Competition catalog.
See Mikuni PHH |
|
| GX Induction System
ddgonzal Engine 2011/8/25 5:15 Tell a friend
1785 0 0.00 (0 votes)
|
| Radiator Core Support Dimensions
ddgonzal Engine 2011/8/24 10:39 Tell a friend
2520 2 0.00 (0 votes)
1972 B110
Radiator mounting bolt holes: 37 x 25 cm |
|
| B110 Crossmember dimension
ddgonzal Engine 2011/8/24 10:22 Tell a friend
1559 0 0.00 (0 votes)
| 450 mm between holes in crossmember mounts |
|
| Steering Linkage Dimensions
ddgonzal Suspension 2011/8/24 10:14 Tell a friend
1943 0 0.00 (0 votes)
540 mm between steering arm & idler arm
480 mm between inner tie rod ends
525 mm between LCA pivots |
|
| Techron
ddgonzal ddgonzal 2011/8/24 8:50 Tell a friend
1290 0 0.00 (0 votes)
| Or whatever gasoline is convenient ... |
|
| Broken Weld
ddgonzal ddgonzal 2011/8/24 8:49 Tell a friend
1672 3 0.00 (0 votes)
| It cracked going up a mountain pass, foot to the floor for a few minutes. |
|
| Welcome to WA
ddgonzal ddgonzal 2011/8/24 8:15 Tell a friend
1241 1 0.00 (0 votes)
| crossed the river from oregon |
|
| The Fisherman
ddgonzal ddgonzal 2011/8/24 8:11 Tell a friend
1283 0 0.00 (0 votes)
|
| Tsunami Evacuation Route
ddgonzal ddgonzal 2011/8/24 8:05 Tell a friend
1082 0 0.00 (0 votes)
|
| Seaview
ddgonzal ddgonzal 2011/8/24 8:00 Tell a friend
1141 0 0.00 (0 votes)
|
| Pacific Beach
ddgonzal ddgonzal 2011/8/24 6:58 Tell a friend
1104 0 0.00 (0 votes)
|
| SSR Mk II fitment
ddgonzal ddgonzal 2011/8/24 5:49 Tell a friend
1095 0 0.00 (0 votes)
|
| VIA Speedstar
ddgonzal ddgonzal 2011/8/24 5:48 Tell a friend
1136 0 0.00 (0 votes)
| fits over the late-model hub |
|
| Late-model disc brakes
ddgonzal ddgonzal 2011/8/24 5:47 Tell a friend
1135 0 0.00 (0 votes)
|
| Jellies on
ddgonzal ddgonzal 2011/8/24 5:46 Tell a friend
1603 5 0.00 (0 votes)
| Hmmm, it's not seating against the hub... |
|
| Jellies
ddgonzal ddgonzal 2011/8/24 5:46 Tell a friend
1180 0 0.00 (0 votes)
| Center hole is not big enough for the late-model disk brakes, but fits the B110 discs well enough. |
|
| Ute
ddgonzal ddgonzal 2011/8/24 5:45 Tell a friend
1137 0 0.00 (0 votes)
|
| Early Tension Rod
ddgonzal Suspension 2011/8/23 23:51 Tell a friend
2030 0 0.00 (0 votes)
| 1970-1975 Tension Rod fits early ball joint bolt pattern. See Ball joint |
|
| Late Tension Rod
ddgonzal Suspension 2011/8/23 23:51 Tell a friend
1964 0 0.00 (0 votes)
| 1976-up Tension Rod fits Late ball joint bolt pattern. See Ball joint |
|
| H74 Ball Joint bolt pattern
ddgonzal Suspension 2011/8/23 23:49 Tell a friend
1851 0 0.00 (0 votes)
|
| H10 ball joint bolt pattern
ddgonzal Suspension 2011/8/23 23:49 Tell a friend
1849 0 0.00 (0 votes)
|
| B310 knuckle arm changes
ddgonzal Suspension 2011/8/23 7:46 Tell a friend
2182 0 0.00 (0 votes)
Knuckle arm dimension changes:
B310 used two different knuckle arms. Some B310 used 45mm struts and some used the larger 2" size.
* 75mm bolt centers: 45mm struts, 10mm bolts
* 80mm bolt centers: 2" (50.8mm) struts, 12mm bolts
Unfortunately they also changed the steering arm length, hence the steering ratio. 133.4mm vs 142.8mm. This means slower steering with the larger struts. But you can by quick-ratio steering arms from Pitroad |
|
| Modified Knuckle Arm for 2" struts
ddgonzal Suspension 2011/8/23 7:37 Tell a friend
3390 9 0.00 (0 votes)
Sold at Pitroad
Top: Stock later B120 knuckle arm (with 10mm bolt holes) for 45mm struts
Bottom: Modified for 12mm bolts offset for wider spacing for 2" (50.8mm) struts |
|
| Late alternator mounting
ddgonzal Engine 2011/8/23 1:34 Tell a friend
1839 0 0.00 (0 votes)
|
| Quad throttle manifold 10
lamb_daiquiri Fuel Injection 2011/8/20 6:17 Tell a friend
2240 0 0.00 (0 votes)
|
| Quad throttle manifold 9
lamb_daiquiri Fuel Injection 2011/8/20 6:16 Tell a friend
3265 9 0.00 (0 votes)
|
| Quad throttle manifold 8
lamb_daiquiri Fuel Injection 2011/8/20 6:16 Tell a friend
1767 0 0.00 (0 votes)
|
| Quad throttle manifold 7
lamb_daiquiri Fuel Injection 2011/8/20 6:16 Tell a friend
1713 0 0.00 (0 votes)
|
| Quad throttle manifold 6
lamb_daiquiri Fuel Injection 2011/8/20 6:15 Tell a friend
1690 0 0.00 (0 votes)
|
| Quad throttle manifold 5
lamb_daiquiri Fuel Injection 2011/8/20 6:15 Tell a friend
1536 0 0.00 (0 votes)
|
| Quad throttle manifold 4
lamb_daiquiri Fuel Injection 2011/8/20 6:15 Tell a friend
1532 0 0.00 (0 votes)
|
| Quad throttle manifold 3
lamb_daiquiri Fuel Injection 2011/8/20 6:14 Tell a friend
1503 0 0.00 (0 votes)
|
| Quad throttle manifold 2
lamb_daiquiri Fuel Injection 2011/8/20 6:14 Tell a friend
1877 2 0.00 (0 votes)
|
| Quad throttle manifold 1
lamb_daiquiri Fuel Injection 2011/8/20 6:13 Tell a friend
1581 0 0.00 (0 votes)
| Pics of my manifold, a work in progresss. Still need to build an airbox, port match etc.... |
|
| 1978 crossmember changes
ddgonzal Engine 2011/8/19 21:51 Tell a friend
2214 1 0.00 (0 votes)
|
| A14 round port manifold for 1978
ddgonzal Engine 2011/8/19 21:02 Tell a friend
1761 0 0.00 (0 votes)
|
| 1977 A14 manifold
ddgonzal Engine 2011/8/19 20:59 Tell a friend
1704 0 0.00 (0 votes)
| Typical oval port for Datsun F10 Canada |
|
| 728 cylinder head (GFU)
ddgonzal Engine 2011/8/19 20:35 Tell a friend
1916 1 0.00 (0 votes)
See 728 cylinder head
This page is from the Service Bulletin "Introduction of Datsun F10 (1978 Model)" |
|
| 728 cylinder head
ddgonzal Engine 2011/8/19 20:33 Tell a friend
1660 0 0.00 (0 votes)
|
| Datsun factory alloy wheels
SunnyDaze Brochure 1 2011/8/19 10:08 Tell a friend
3405 2 0.00 (0 votes)
|
| Datsun factory alloy wheels
SunnyDaze Brochure 1 2011/8/19 10:07 Tell a friend
1432 0 0.00 (0 votes)
|
| Datsun factory alloy wheels
SunnyDaze Brochure 1 2011/8/19 10:07 Tell a friend
1569 0 0.00 (0 votes)
|
| Datsun factory alloy wheels
SunnyDaze Brochure 1 2011/8/19 10:06 Tell a friend
1658 0 0.00 (0 votes)
|
| W50 ball joint
ddgonzal Suspension 2011/8/18 5:28 Tell a friend
2739 5 0.00 (0 votes)
|
