General specifications for Datsun 1200 are listed here.
For other parts and systems use the search box at end of this page (below).
1972 USA Owners manual
Page 39 Page 40
General Specifications
[edit]
Overview
- Wheelbase: 90.6 inch (2,300 mm) ALL, including truck
- Overall length: 150.8 inch (3,830 mm) Sedan & Coupe
- Overall width:
- Overall height:
- Track, front:
- Track, rear:
- Turning radius:
- Ground clearance: 6.7 inch (170 mm) Sedan & Coupe
For more details, see: Measurements
Components
- Engine:
- Clutch:
- Transmission, manual:
- Transmission, automatic:
- Rear Axle:
- Suspension:
- Brakes:
- Steering Gearbox: Recirculating ball type
- Wheel and Tire: 6.00-12-4PR, 4J Rim
[edit]
Capacities
- Fuel tank: Sedan:40 litre, Coupe:38 litre
- Cooling System: 4.9 litre with heater
- Oil pan: 2.7 litre
- Oil filter: 0.54 litre
- Transmission case, manual: 1.2 litre
- Transmission case, automatic: 5.5 litre
- Differential case: 0.75 litre
- Engine number: A12xxxxxx
- Chassis Identification number: mB110xxxxxx
[edit]
Engine Specifications
- Displacment:
- Bore & Stroke:
- Compression Ratio
- 9.0:1 Japan, Australia
- 9.0:1: 1971 Export
- 10.0:1 A12GX Hi-gas
- 9.5:1 ??? A12GX Lo-gas
- 8.5:1: 1972 Export (e.g. North America)
- 8.5:1: 1973 North America
- Source: Service Bulletin 1974 Introduction of New Datsun B210 Series
- Spark plugs firing order: 1-3-4-2 (same as most four-cylinder engines)
- Dwell angle at idle:
- Ignition Timing:
- Idling speed:
- Spark plug gap:
- Distributor point gap:
- Valve Clearance (hot):
- Belt tension:
¤