| 120Y on ice
 revhead001  Misc  2008/4/15 2:36  Tell a friend
 1440  1  0.00 (0 votes)
| Found this on the Ratsun forum... Cool... |
|
| Score! A14 and 5 speed for $500
revhead001 Misc 2008/4/14 12:39 Tell a friend
2083 13 0.00 (0 votes)
| I cannot believe it happened. There is still the odd bargain to be negotiated out there. An absolute champion sold me his driveline for $500 plus an extra $100 to drop it off at my brothers in adelaide. HOWZAT! |
|
| Shed full of datsuns.
revhead001 Misc 2008/4/14 5:55 Tell a friend
1951 5 0.00 (0 votes)
| I put my 120Y together in here in about 3 months. I had to move the 120Y around on a trolley jack and had it against the wall and about 80cn each side of the 180B with the bumper scraping on the door. I gutted the 180B in 36 hours and removed by 48 hours. I had a mission to accomplish. |
|
| Shed full of datsuns
revhead001 Misc 2008/4/14 5:52 Tell a friend
1381 1 0.00 (0 votes)
| When I was doing my conversion I had to make the most of the space I had. Great shed. Steep short driveway. 3 cars and a bench and heaps of crap to move around. |
|
| Totally Tubular
ddgonzal Engine 2008/4/14 5:16 Tell a friend
2663 3 0.00 (0 votes)
Can this be adapted to the A-series?
Factory Ford EFI setup, 1991-1996 Escort 1.9 liter "CVH" (Compound Valve Hemi) engine. |
|
| Datsun Dog
ddgonzal ddgonzal 2008/4/14 5:10 Tell a friend
4175 9 0.00 (0 votes)
He's Aussie Style and loves to ride in the Datsun 1200.
Look at those surf boards following us... |
|
| Cracked A14 Crankshaft Pulley
ddgonzal Engine 2008/4/14 5:06 Tell a friend
2159 5 0.00 (0 votes)
|
| New rims
2332owner 2332owner 2008/4/14 1:18 Tell a friend
6220 20  10.00 (2 votes)
| Techno Racing... 13X7, 13X8 |
|
| Progress d
Lachie Misc 2008/4/13 15:54 Tell a friend
1391 1 0.00 (0 votes)
|
| Progress c
Lachie Misc 2008/4/13 15:53 Tell a friend
2010 11 0.00 (0 votes)
|
| Progress b
Lachie Misc 2008/4/13 15:53 Tell a friend
1378 1 0.00 (0 votes)
|
| Progress a
Lachie Misc 2008/4/13 15:52 Tell a friend
1235 1 0.00 (0 votes)
|
| Goodbye 666sunny
K-DOGG Misc 2008/4/13 10:55 Tell a friend
1502 3 0.00 (0 votes)
| well its finally time for ol faithful to be parted out. the front end and steering are goin on the brownie and tinmans takin the driveline. Anyone is welcome to whats left after next weekend.... |
|
| Titan strut bar!
sunny_coupe110 Racing 2008/4/13 9:00 Tell a friend
4526 14 0.00 (0 votes)
Very lightweight.
2.35Kg___ |
|
| tappets ca18det dyno sheet
tappet tappet 2008/4/13 3:12 Tell a friend
3471 8 0.00 (0 votes)
i took the 12vee on the dyno yesterday...
made 234hp @16psi 6350 revs...
|
|
| A13
Pendles Misc 2008/4/13 2:35 Tell a friend
1861 8 0.00 (0 votes)
|
| A13
Pendles Misc 2008/4/13 2:35 Tell a friend
1434 1 0.00 (0 votes)
|
| A13
Pendles Misc 2008/4/13 2:34 Tell a friend
1525 1 0.00 (0 votes)
|
| Wash & Wax 6
Coops Coops 2008/4/13 2:31 Tell a friend
2275 1 0.00 (0 votes)
|
| Wash & Wax 5
Coops Coops 2008/4/13 2:26 Tell a friend
2329 1 0.00 (0 votes)
| Engines need cleaning too.... |
|
| Wash & Wax 4 - Interior shot 2
Coops Coops 2008/4/13 2:24 Tell a friend
2341 1 0.00 (0 votes)
Happy with the overall interior trim job.
Liked my old bucket seats better - The mod plate man makes the rules though! |
|
| Wash & Wax 3 - Interior shot 1
Coops Coops 2008/4/13 2:21 Tell a friend
2219 0 0.00 (0 votes)
Cleaned up the interior too for good measure.
Shot through the rear window. |
|
| Wash & Wax 2
Coops Coops 2008/4/13 2:20 Tell a friend
2288 1 0.00 (0 votes)
|
| Wash & Wax 1
Coops Coops 2008/4/13 2:12 Tell a friend
2319 3 0.00 (0 votes)
With the water restrictions, I hadn't washed the old girl for a while & she was looking a bit sad.
Came up great - I forgot how good she looked. |
|
| Angle DCOE InMani
ddgonzal Engine 2008/4/12 17:49 Tell a friend
2042 7 10.00 (1 vote)
|
| Angled Twin Side-draft InMani
ddgonzal Engine 2008/4/12 17:44 Tell a friend
2863 5 0.00 (0 votes)
|
| Nissan Competion Tension Rod bushing kit
ddgonzal Suspension 2008/4/12 8:10 Tell a friend
2393 1 0.00 (0 votes)
|
| A12T kit
ddgonzal Engine 2008/4/12 7:39 Tell a friend
1827 1 0.00 (0 votes)
| Hitachi Twin-Carb, the A12T manifold has the air valve next to the PCV valve. |
|
| 1000 coupe plastic kit.
sidedraught Misc 2008/4/12 7:38 Tell a friend
2566 4 0.00 (0 votes)
| Kb10 in 1:28 scale plastic kit from Japan. |
|
| S62 A12 and 4-speed
ddgonzal Engine 2008/4/12 7:35 Tell a friend
2604 1 0.00 (0 votes)
|
| B122 Interior
ddgonzal Body and Interiors 2008/4/12 7:21 Tell a friend
2548 4 0.00 (0 votes)
| I wonder if new Package Trays are still available? |
|
| A12 Exhaust Manifold
ddgonzal Engine 2008/4/12 7:05 Tell a friend
2071 1 0.00 (0 votes)
1991 model, 3-bolt flange like A14
Also see previous picture |
|
| A12 Exhaust Manifold
ddgonzal Engine 2008/4/12 7:04 Tell a friend
2270 1 0.00 (0 votes)
1991 model with O2 Sensor
Also see next picture |
|
| Engine Damper
ddgonzal Suspension 2008/4/12 6:52 Tell a friend
3751 7 0.00 (0 votes)
| Your old Tower Bars are now obsolete... |
|
| 60-Series Transmission Member
ddgonzal Drive Train 2008/4/12 6:37 Tell a friend
2577 5 0.00 (0 votes)
|
| TRD Struts
ddgonzal Suspension 2008/4/12 6:34 Tell a friend
2680 1 0.00 (0 votes)
|
| Linkage 4-speed
ddgonzal Drive Train 2008/4/12 6:24 Tell a friend
2131 2 0.00 (0 votes)
|
| Dvd screen in my datto ute
crzy_1200_ute Mechanical 2008/4/10 6:40 Tell a friend
3589 16 0.00 (0 votes)
|
| my ute-engine bay
appsy1 Members 2008/4/9 10:19 Tell a friend
2275 1 0.00 (0 votes)
| polished strut brace twin 45mm dellortos,bigger cam,lightened flywheel thats all the specs i know about the mighty a12 |
|
| my ute-other side
appsy1 Members 2008/4/9 10:17 Tell a friend
1757 1 0.00 (0 votes)
|
| my ute-tray
appsy1 Members 2008/4/9 10:16 Tell a friend
1767 1 0.00 (0 votes)
|
| my ute-another veiw
appsy1 Members 2008/4/9 10:15 Tell a friend
1699 1 0.00 (0 votes)
|
| my ute-nearly finished
appsy1 Members 2008/4/9 10:14 Tell a friend
1751 1 0.00 (0 votes)
|
| KB10 Gatton Sprints 08
bert Racing 2008/4/9 9:10 Tell a friend
4009 16 0.00 (0 votes)
| First run into turn two,ended up second in class |
|
| my ute-no springs
appsy1 Members 2008/4/9 4:09 Tell a friend
1984 11 0.00 (0 votes)
| my ute while i had the springs out fixing them up |
|
| work space
todd Forum 2008/4/9 3:17 Tell a friend
1609 1 10.00 (1 vote)
| yeh. moving the ute out of our pool room... all aussies have their ute in the pool room, what are u talking about? lol |
|
| front end and side
todd Forum 2008/4/9 3:14 Tell a friend
1748 1 0.00 (0 votes)
| thought black grill would look better |
|
| ass end
todd Misc 2008/4/9 3:12 Tell a friend
1573 1 0.00 (0 votes)
| picture of the back of the ute to show where its been shaved etc. |
|
| finally out of the pool room
todd Misc 2008/4/9 3:04 Tell a friend
1578 1 0.00 (0 votes)
|
| NEW PLATES
StealthUnderRadar datsun120ycoupe 2008/4/8 10:55 Tell a friend
1804 8  5.00 (2 votes)
|
| NEW PLATES
StealthUnderRadar datsun120ycoupe 2008/4/8 10:50 Tell a friend
1365 1 0.00 (0 votes)
Thanks to our or my RTA,Cheers Peter
Rea rSet |
|
| Angle eyes for 1400 Bakkie
Velociti Misc 2008/4/8 6:14 Tell a friend
2689 9 0.00 (0 votes)
Found these at Autostylin in Klerksdorp yesterday:
Set of Crystal clear headlights with angle eyes: R299-00
Set of Semi clear tail lights: R395-00 |
|
| The LPG tank setup
revhead001 Misc 2008/4/7 13:52 Tell a friend
1737 4 0.00 (0 votes)
| I used an old torana universal bracket and modified it to suit. (saves with the engineers) I set it up from the well about 50mm so I can squeeze the 14"mag spare in as well. |
|
| LPG Filler
revhead001 Misc 2008/4/7 13:50 Tell a friend
1589 0 0.00 (0 votes)
| This is my own filler setup using the origional filler neck to adapt the LPG filler |
|
| Custom LPG carby on the 120Y
revhead001 Misc 2008/4/7 13:49 Tell a friend
1817 1 0.00 (0 votes)
| This is the second LPG setup in the chase for power and economy. I used a standard vac sec base and adapted a impco 125 mixer |
|
| Another of Don's 120Y vans
revhead001 Misc 2008/4/7 13:46 Tell a friend
1793 2 0.00 (0 votes)
| Still trying to decide which one is the best to do. This one appears to have the least amount of rust. Too scared to take the paint off. |
|
| datsunB210
datsun-B210 Members 2008/4/7 10:29 Tell a friend
2175 9  8.00 (1 vote)
from japan
very cool B210 ! |
|
| Adelaide Cruise 4
WhiteSedan WhiteSedan 2008/4/7 9:07 Tell a friend
1701 1 0.00 (0 votes)
|
| Adelaide Cruise 3
WhiteSedan WhiteSedan 2008/4/7 8:44 Tell a friend
1561 1 0.00 (0 votes)
|
| Adelaide Cruise Action 2
WhiteSedan WhiteSedan 2008/4/7 8:38 Tell a friend
1672 4 0.00 (0 votes)
| Taken from the lounge on wheels. |
|
| Adelaide Cruise Action
WhiteSedan WhiteSedan 2008/4/7 8:35 Tell a friend
1807 5 0.00 (0 votes)
| 12undies sedan and crzy_1200_ute |
|
| new engine
PIGDOG PIGDOG 2008/4/7 6:23 Tell a friend
2572 6 0.00 (0 votes)
2 litre L18 built by nissco
should be in my car in a couple of weeks |
|
| Green Coupe Drag Roller, Florida USA
ddgonzal Classifieds 2008/4/7 6:10 Tell a friend
1486 1 0.00 (0 votes)
|
| Lime Green CoupE
ddgonzal Classifieds 2008/4/7 6:00 Tell a friend
1391 1 0.00 (0 votes)
|
| Plug-in 1200
ddgonzal Body and Interiors 2008/4/7 4:58 Tell a friend
2880 10 0.00 (0 votes)
| Long-nose 1200 in snow country |
|
| Clarion Radio
ddgonzal Body and Interiors 2008/4/7 4:49 Tell a friend
2251 1 0.00 (0 votes)
| original equipment UKW/MW band radio |
|
| Model T
ddgonzal Engine 2008/4/7 2:30 Tell a friend
2257 1 0.00 (0 votes)
|
| A12 T
ddgonzal Engine 2008/4/7 2:10 Tell a friend
2989 9 0.00 (0 votes)
|
| Professional A12
ddgonzal Engine 2008/4/7 1:53 Tell a friend
2197 1 0.00 (0 votes)
|
| My Purple Dato-B310 Ext.
sal_hal Body and Interiors 2008/4/6 11:20 Tell a friend
2756 6 0.00 (0 votes)
| See the purple metallic outer of my newly finished dato B310. Modified front grill and bottom shield has already been posted. |
|
| adelaide cruise, 7
crzy_1200_ute Mechanical 2008/4/6 8:24 Tell a friend
3107 5 0.00 (0 votes)
|
| adelaide cruise, 6
crzy_1200_ute Misc 2008/4/6 8:23 Tell a friend
1529 5 0.00 (0 votes)
|
| adelaide cruise, 5
crzy_1200_ute Misc 2008/4/6 8:23 Tell a friend
1449 1 0.00 (0 votes)
|
| adelaide cruise, 4
crzy_1200_ute Misc 2008/4/6 8:22 Tell a friend
1412 2 0.00 (0 votes)
|
| adelaide cruise, 3
crzy_1200_ute Mechanical 2008/4/6 8:22 Tell a friend
2453 1 0.00 (0 votes)
|
| adelaide cruise, 2
crzy_1200_ute Mechanical 2008/4/6 8:21 Tell a friend
2344 1 0.00 (0 votes)
|
| adelaide cruise, 1
crzy_1200_ute Mechanical 2008/4/6 8:21 Tell a friend
2581 1 0.00 (0 votes)
|
| Nash Metro #3
Daddyoethan Misc 2008/4/6 3:27 Tell a friend
1323 1 0.00 (0 votes)
| Quarterpannel with diff installed. Sammi wheels. I am looking to fit a T@y@t@ Starlett rear diff with FWD wheels to keep the track under 54" Flairs will be a necessity. Got shortened Datto Axles anyone? |
|
| Nash Metro #2
Daddyoethan Misc 2008/4/6 3:13 Tell a friend
1219 1 0.00 (0 votes)
| Suzuki Sammi rear diff (short axle + short axle) for now. |
|
| Nash Metro #1
Daddyoethan Misc 2008/4/6 2:50 Tell a friend
1234 1 0.00 (0 votes)
Coil overs.
T@y@t@ AE86, with same brakes, Datto 280 Zed crossmember and rack and pinion. |
|
| distance of pillar
datsunsunny Misc 2008/4/5 19:00 Tell a friend
1318 1 0.00 (0 votes)
|
| rupert's coupe
rupertscoupe Misc 2008/4/5 5:16 Tell a friend
1636 1 0.00 (0 votes)
| am trying a bearing refresh, but now need to build that tough motor sooner then i wanted |
|
| rupert's coupe
rupertscoupe Misc 2008/4/5 5:15 Tell a friend
1767 6 0.00 (0 votes)
| the engine bay....now needs a new engine :( made 206 hp at 7000 rpm with only 11 psi but now has a big end bearing not quite in the same shape...first power run snagged it |
|
| rupert's coupe
rupertscoupe Misc 2008/4/5 5:13 Tell a friend
1618 2 0.00 (0 votes)
|
| ruperts coupe
rupertscoupe Misc 2008/4/5 5:06 Tell a friend
1698 2 0.00 (0 votes)
| fronts just fit under the slight flaired guards |
|
| ruperts coupe 2
rupertscoupe Misc 2008/4/5 5:05 Tell a friend
1534 4 0.00 (0 votes)
| before painting...17" wheels just fit |
|
| ruperts coupe 1
rupertscoupe Misc 2008/4/5 5:05 Tell a friend
1442 1 0.00 (0 votes)
|
| Other Front end Chrome
Pendles Misc 2008/4/5 1:01 Tell a friend
1396 1 0.00 (0 votes)
| The rest of the Front end chrome |
|
| Sedan Grille
Pendles Misc 2008/4/5 0:59 Tell a friend
2180 3 0.00 (0 votes)
|
| Recessed BA falcon indicator for guard
BAD310 BAD310 2008/4/4 17:22 Tell a friend
3105 1 0.00 (0 votes)
| This is the indicators I'm having on my sunny. To make the recess I routed out the shape from 18mm MDF board and then screwed the steel to the mdf so it wouldn't move, and then tapped it into shape with a hammer |
|
| me and the ladies
datsunsunny Misc 2008/4/4 17:04 Tell a friend
1539 1 0.00 (0 votes)
| this is me with my 2 datsun sunny(210) |
|
| my 2 sunnies in the garage
datsunsunny Misc 2008/4/4 16:49 Tell a friend
1416 1 0.00 (0 votes)
| these are my 2 sunnies the brown one is the one on which the convertion is going to take place |
|
| Boss needed for sports wheel!
K-DOGG Misc 2008/4/4 9:56 Tell a friend
1788 8 0.00 (0 votes)
| I need a boss for this saas wheel for my 1200. it has one for a 1600 on it atm which i dont need. my 1200 has a stockie on it now and its too big. |
|
| My old 76 ute
Mitch_photog Misc 2008/4/3 12:00 Tell a friend
1318 2 0.00 (0 votes)
| This is the old ute the day I bought it, It just turned up crushed for scrap. It was written of by a d!ckhead on the wrong side of the road. Let it be a lesson learned for everyone to take care of there dattos |
|
| New Project
Pendles Misc 2008/4/3 10:55 Tell a friend
1158 1 0.00 (0 votes)
|
| New Project
Pendles Misc 2008/4/3 10:54 Tell a friend
1218 1 0.00 (0 votes)
| The usual assortment of rust, though relatively minor |
|
| New Project
Pendles Misc 2008/4/3 10:54 Tell a friend
1146 1 0.00 (0 votes)
| Getting ready to do the body |
|
| New Project
Pendles Misc 2008/4/3 10:53 Tell a friend
1449 11 0.00 (0 votes)
| Getting ready to do the body |
|
| New Project
Pendles Misc 2008/4/3 10:51 Tell a friend
1291 2 0.00 (0 votes)
|
| Rear Comp Suspension Setup
WhiteSedan Suspension 2008/4/3 10:47 Tell a friend
3045 3 0.00 (0 votes)
| From US Competition Manual |
|
