| Tomei-style Oil Pan 1/3
 ddgonzal  Mechanical  2011/3/10 4:34  Tell a friend
 3752  5  0.00 (0 votes)
|
| L18 turbo
yellowtail Engine 2011/3/10 4:32 Tell a friend
3212 2 0.00 (0 votes)
|
| Nissan Sentra
GX Body and Interiors 2011/3/7 11:16 Tell a friend
1592 0 0.00 (0 votes)
| A friend sent me this pic and asked me what I think about it.... What do you people think about the stripes?? Please let me know at andre.db@vodamail.co.za |
|
| working on the 2-dr
ddgonzal ddgonzal 2011/3/7 4:04 Tell a friend
1228 0 0.00 (0 votes)
|
| 14x8 Speed Star MK-2
ddgonzal Body and Interiors 2011/3/7 3:59 Tell a friend
1387 0 0.00 (0 votes)
14X 8.0+-0B
SPEED STAR CO., LTD. |
|
| 14x8 SSR Mark II wheel
ddgonzal Body and Interiors 2011/3/7 3:56 Tell a friend
1958 2 0.00 (0 votes)
195/60R14 tire on stock unlowered 1200. 14x8 offset 0
too wide for Datsun 1200 not enough room to put a finger between the tire and fender. On a bump it would hit the body. |
|
| 14x8 SpeedStar Mark 2 wheel
ddgonzal Body and Interiors 2011/3/7 3:54 Tell a friend
2824 1 0.00 (0 votes)
8" wide wheel 0 offset.
too wide for Datsun 1200 -- sticks out of the wheel well about 1"
195/60R14 stretched tire (tire is rated for max 7" wide wheel) |
|
| 14x8 wheels SSR Mark 2
ddgonzal Body and Interiors 2011/3/7 3:51 Tell a friend
4406 3 0.00 (0 votes)
195/60R14 Advan Neova AD06 Yokohama
Nominal 23.2" diameter tire fills the wheel well just perfect (stock 12, not lowered) |
|
| Where to Jack the 1200
ddgonzal Body and Interiors 2011/3/7 3:44 Tell a friend
1655 0 0.00 (0 votes)
| There are two notches each side, one near each wheel. |
|
| b310 bumper mount close-up
AgentWright007 Body and Interiors 2011/3/7 2:06 Tell a friend
1527 0 0.00 (0 votes)
| just in case someone was curious |
|
| b310 rear bumper-less
AgentWright007 Body and Interiors 2011/3/7 2:05 Tell a friend
1650 0 0.00 (0 votes)
|
| b310 bumper removed
AgentWright007 Body and Interiors 2011/3/7 2:04 Tell a friend
1310 0 0.00 (0 votes)
| all dinged up from when I got rear-ended while stopped at a traffic light. Not sure if im going to try to fix it or replace it. |
|
| b310 body work (in progress)
AgentWright007 Body and Interiors 2011/3/7 2:03 Tell a friend
1658 0 0.00 (0 votes)
|
| b310 body work (before)
AgentWright007 Body and Interiors 2011/3/7 2:02 Tell a friend
1432 0 0.00 (0 votes)
|
| DAT00W
Lachie Misc 2011/3/6 9:22 Tell a friend
2643 2  10.00 (1 vote)
| Powercruise Sydney - 2011 |
|
| White FJ20 1200 Ute b
Lachie Misc 2011/3/6 3:05 Tell a friend
2369 0 0.00 (0 votes)
| Powercruise Sydney - 2011 |
|
| White FJ20 1200 Ute a
Lachie Misc 2011/3/6 3:04 Tell a friend
2322 0 0.00 (0 votes)
| Powercruise Sydney - 2011 |
|
| DATSMAD
Lachie Misc 2011/3/6 3:04 Tell a friend
2226 0 0.00 (0 votes)
| Powercruise Sydney - 2011 |
|
| CYA60L b
Lachie Misc 2011/3/6 3:03 Tell a friend
2007 0 0.00 (0 votes)
| Powercruise Sydney - 2011 |
|
| CYA60L a
Lachie Misc 2011/3/6 3:03 Tell a friend
2125 0 0.00 (0 votes)
| Powercruise Sydney - 2011 |
|
| SR20TB c
Lachie Misc 2011/3/6 3:02 Tell a friend
2097 0 0.00 (0 votes)
| Powercruise Sydney - 2011 |
|
| SR20TB b
Lachie Misc 2011/3/6 3:02 Tell a friend
2135 0 0.00 (0 votes)
| Powercruise Sydney - 2011 |
|
| WARZON b
Lachie Misc 2011/3/6 3:01 Tell a friend
2204 0 0.00 (0 votes)
| Powercruise Sydney - 2011 |
|
| Blue CA18 1200 Coupe & FATSUN
Lachie Misc 2011/3/6 3:00 Tell a friend
1903 0 0.00 (0 votes)
| Powercruise Sydney - 2011 |
|
| WARZON a
Lachie Misc 2011/3/6 3:00 Tell a friend
1835 0 0.00 (0 votes)
| Powercruise Sydney - 2011 |
|
| SR20TB a
Lachie Misc 2011/3/6 2:59 Tell a friend
1735 0 0.00 (0 votes)
| Powercruise Sydney - 2011 |
|
| FJ1200 d
Lachie Misc 2011/3/6 2:58 Tell a friend
1785 0 0.00 (0 votes)
| Powercruise Sydney - 2011 |
|
| FJ1200 c
Lachie Misc 2011/3/6 2:57 Tell a friend
1932 0 0.00 (0 votes)
| Powercruise Sydney - 2011 |
|
| FJ1200 b
Lachie Misc 2011/3/6 2:56 Tell a friend
1728 0 0.00 (0 votes)
| Powercruise Sydney - 2011 |
|
| FJ1200 a
Lachie Misc 2011/3/6 2:56 Tell a friend
1789 0 0.00 (0 votes)
| Powercruise Sydney - 2011 |
|
| Blue CA18 1200 Coupe c
Lachie Misc 2011/3/6 2:55 Tell a friend
1669 0 0.00 (0 votes)
| Powercruise Sydney - 2011 |
|
| FATSUN c
Lachie Misc 2011/3/6 2:54 Tell a friend
2128 0 0.00 (0 votes)
| Powercruise Sydney - 2011 |
|
| Blue CA18 1200 Coupe b
Lachie Misc 2011/3/6 2:54 Tell a friend
1691 0 0.00 (0 votes)
| Powercruise Sydney - 2011 |
|
| FATSUN b
Lachie Misc 2011/3/6 2:53 Tell a friend
1671 0 0.00 (0 votes)
| Powercruise Sydney - 2011 |
|
| FATSUN a
Lachie Misc 2011/3/6 2:52 Tell a friend
1610 0 0.00 (0 votes)
| Powercruise Sydney - 2011 |
|
| Blue CA18 1200 Coupe a
Lachie Misc 2011/3/6 2:51 Tell a friend
1738 0 0.00 (0 votes)
| Powercruise Sydney - 2011 |
|
| 280ZX rear disk rotor
ddgonzal Brakes 2011/3/5 22:50 Tell a friend
1979 0 0.00 (0 votes)
|
| 280ZX vented front disk
ddgonzal Brakes 2011/3/5 22:48 Tell a friend
1881 0 0.00 (0 votes)
|
| Propane-powered A15
ddgonzal Engine 2011/3/5 21:09 Tell a friend
1534 0 0.00 (0 votes)
B210sleeper's Datsun B310 using a European setup from omvl in italy, it's a variable piston carb.
See Propane
Bottom left: propane vaporizer
Up diagonally: mixture solenoid
Up from that between cone filter: propane mixer
90 deg bend into GA16DE throttle body.
Blue hose running all over, oil plumbing.
|
|
| Wheel Offset
ddgonzal Body and Interiors 2011/3/5 19:27 Tell a friend
2338 0 0.00 (0 votes)
maximum Wheel width is 7" to fit under the stock guards -- but it only fits with offsets of about +10 to -10.
|
|
| Front suspension body alignment
ddgonzal Body and Interiors 2011/3/5 17:57 Tell a friend
3186 1 0.00 (0 votes)
|
| Ute Body Alignment
ddgonzal Body and Interiors 2011/3/5 17:57 Tell a friend
2511 0 0.00 (0 votes)
|
| Cam tool 3
sikyne Engine 2011/3/4 2:19 Tell a friend
2262 1 0.00 (0 votes)
|
| Cam tool 2
sikyne Engine 2011/3/4 2:19 Tell a friend
1443 0 0.00 (0 votes)
|
| Cam Tool 1
sikyne Engine 2011/3/4 2:17 Tell a friend
1519 0 0.00 (0 votes)
| Tool for changing cam without engine removal |
|
| shoulder belt anchor point
ddgonzal Body and Interiors 2011/3/2 7:59 Tell a friend
1546 0 0.00 (0 votes)
|
| Ute Headliner
ddgonzal Body and Interiors 2011/2/28 7:01 Tell a friend
1662 0 0.00 (0 votes)
(注) 73930 INSULATOR-ROOF
73910 CLOTH ASSY-HEADLINING
73921 WIRE-LISTING, HEADLINING (3)
73220M COVER-ROOF BOW (4 early, 0 late)
73938 PAD-ROOF FRONT RAIL (2)
|
|
| B210 seat vinyl pattern
ddgonzal Body and Interiors 2011/2/28 5:43 Tell a friend
1377 0 0.00 (0 votes)
1978 B210 rear seat
Identical to B110 (interchanges) but has a longer mounting hook. |
|
| Seat Vinyl Fabric
ddgonzal Body and Interiors 2011/2/28 4:05 Tell a friend
1593 0 0.00 (0 votes)
coupe seats
inserts: 1/2" square pattern vinyl cut on 45° angle
perimeter cloth: Leather-like vinyl |
|
| MOTOR 27 February 1971
ddgonzal Mag. Articles 2011/2/27 2:36 Tell a friend
1151 0 0.00 (0 votes)
Datsun in Britain and Japan
Road Test -- Datsun 1200 |
|
| NAPS introduction
ddgonzal Docs 2011/2/27 2:23 Tell a friend
1856 0 0.00 (0 votes)
|
| NAPS for A-series Engine
ddgonzal Body and Interiors 2011/2/26 22:16 Tell a friend
1657 1 0.00 (0 votes)
NAPS system 1977
ニッサン ＮＡＰＳ Ａ系エンジン 整備要領書 １９７７
１９７７年 ４月 日産自動車㈱ サービス部発行
全１２７ページ |
|
| B210 NAPS mark
ddgonzal Body and Interiors 2011/2/26 22:11 Tell a friend
1641 0 0.00 (0 votes)
| NAPS badge/emblem, 1976-1977 |
|
| nice low km motor had service history from day it came out of showroom!
a12datto120y Wallpapers 2011/2/26 10:24 Tell a friend
2198 0 0.00 (0 votes)
|
| all original interior not a single rip!
a12datto120y Wallpapers 2011/2/26 10:22 Tell a friend
2247 0 0.00 (0 votes)
|
| my datsun 120y i got 3 weeks ago!!!
a12datto120y Wallpapers 2011/2/26 10:19 Tell a friend
2412 1 0.00 (0 votes)
| work in progress here are some pics of it!! |
|
| A12A Identification Plate B310
ddgonzal Engine 2011/2/26 7:10 Tell a friend
2304 1 0.00 (0 votes)
B310 58 HP
Bigger is less?
A12A is 1237cc instead of regular A12 1171cc
LB310 plate H9110 (left hand drive B310)
58 HP @ 5600 RPM (SAE NET) |
|
| Racing Seats and Harnesses
datsa73 Body and Interiors 2011/2/26 2:54 Tell a friend
1413 0 0.00 (0 votes)
|
| Seats and Roll Bar
datsa73 Body and Interiors 2011/2/26 2:48 Tell a friend
1411 0 0.00 (0 votes)
| Seats and Roll Bar in and complete. |
|
| Pic01003.JPG
darrenwilson Body and Interiors 2011/2/26 0:34 Tell a friend
1195 0 0.00 (0 votes)
|
| drags171.jpg
jamal BAD310 2011/2/25 18:40 Tell a friend
1751 0 0.00 (0 votes)
|
| vanette mani downpipe
D Engine 2011/2/23 23:11 Tell a friend
1549 0 0.00 (0 votes)
|
| vanette manifold downpipe
D Engine 2011/2/23 12:19 Tell a friend
1529 0 0.00 (0 votes)
|
| Interior
frankthedolphintrainer frankthedolphintrainerm 2011/2/23 8:16 Tell a friend
2057 1 0.00 (0 votes)
|
| 1000 coupe
Gav Body and Interiors 2011/2/23 8:09 Tell a friend
1390 0 0.00 (0 votes)
|
| Bracket below for rollcage.
datsa73 Body and Interiors 2011/2/22 2:43 Tell a friend
1348 0 0.00 (0 votes)
|
| Rollcage
datsa73 Body and Interiors 2011/2/22 2:38 Tell a friend
1363 0 0.00 (0 votes)
| Forward 2 bolts are 5 inches through frame box below. Back one is 1.5 inches through sheet metal. All 3 backed up by plate underneath. Working on brace from rollcage to wheel hump. |
|
| A-series Bell Housing
ddgonzal Mechanical 2011/2/20 9:32 Tell a friend
3050 4 0.00 (0 votes)
gearbox bellhousing pattern
Image to scale 88dpi |
|
| Bluebird Nomad brakes 02
LittleFireyOne Brakes 2011/2/20 5:34 Tell a friend
2393 1 0.00 (0 votes)
Top view. What is needed for this to work is:
- 910 BB S1\S2 bolt on disc hub
- GC22 Nomad Vented rotors (250mm)
- GC22 Nomad calipers
- 7mm spacers to align caliper with disc (measure yourself, I will be double checking before I get the spacers made cos I grinded the bracket on one to get it to stay tight on the sunny strut. Now it will have to be milled true and the corresponding size spacer made for that side
- shorter mounting bolt
- modify banjo fitting on caliper or get new lines with round banjo
I know that you can just use R31 vented rotors and calipers but I found it amusing that these parts I had already wasted money on happen to fit with minor work and wont interfere with the wheels like the sunny attempt was coming close to. |
|
| Bluebird Nomad brakes 01
LittleFireyOne Brakes 2011/2/20 5:25 Tell a friend
2383 0 0.00 (0 votes)
| 910 Bluebird series 1/early series 2 hubs on bluebird struts with GC22 Nomad 250mm vented rotors and corresponding calipers. Next pic will detail what's needed to make it work. |
|
| Badge shopping list
RockOn RockOn 2011/2/19 13:17 Tell a friend
1405 0 0.00 (0 votes)
|
| Wing Mirror Mounting
ddgonzal Body and Interiors 2011/2/19 7:30 Tell a friend
1756 0 0.00 (0 votes)
|
| Mirror Mounting Location
ddgonzal Body and Interiors 2011/2/19 3:41 Tell a friend
1932 1 0.00 (0 votes)
Fender/wing/guard mirror location
28.5 inch (724 mm) from back edge of fender top. |
|
| SeatsSeat and belts
datsa73 Body and Interiors 2011/2/18 15:50 Tell a friend
1563 0 0.00 (0 votes)
| Brackets and sliders complete. Will install both seats after rollcage is complete. |
|
| New seats.
levey levey 2011/2/18 8:41 Tell a friend
2144 3 0.00 (0 votes)
| Hopefully they will be in soon. |
|
| Z24 motor back in car.
datsa73 Engine 2011/2/17 3:04 Tell a friend
3054 3 0.00 (0 votes)
| Getting closer to finishing this bad boy. |
|
| other side
12004lyf Members 2011/2/14 8:07 Tell a friend
1139 0 0.00 (0 votes)
| i haven't had a chance to fit it properly yet |
|
| new carpet
12004lyf Members 2011/2/14 8:05 Tell a friend
1064 0 0.00 (0 votes)
|
| Hitachi Heat Riser
ddgonzal Engine 2011/2/13 23:06 Tell a friend
5017 7 0.00 (0 votes)
The heat stove valve is on the exhaust manifold. It deflects exhaust heat to the underside of the intake manifold during the first 30 seconds or more of starting a cold engine. Result: quicker starts, more efficient running.
See Carburetor Adjustment |
|
| Hitachi Secondary Air Valve
ddgonzal Engine 2011/2/13 22:52 Tell a friend
3059 0 0.00 (0 votes)
|
| Carb leak testing
ddgonzal Engine 2011/2/13 22:36 Tell a friend
1683 0 0.00 (0 votes)
|
| Vacuum Leak Testing
ddgonzal Engine 2011/2/13 22:31 Tell a friend
1903 0 0.00 (0 votes)
If the diaphragm can hold vaccum, it is good and not leaking.
15" to 20" is the normal range. It should show no signs of leaking whatsoever.
See Vacuum Leaks |
|
| Vacuum Motor - Choke Opener
ddgonzal Engine 2011/2/13 22:24 Tell a friend
1617 0 0.00 (0 votes)
Also called choke break.
Early Manual choke carbs don't have this, later ones do.
A very common source of vacuum leak. |
|
| Plugging Vacuum Leaks
ddgonzal Engine 2011/2/13 22:21 Tell a friend
2329 0 0.00 (0 votes)
For temporary use while troubleshooting, use a bolt or screw like this to plug the hose.
A Choke Break
B PCV Valve
C Intake port 1
D Intake port 2 |
|
| Complete Supercharger Plumbing
datsa73 Engine 2011/2/8 3:09 Tell a friend
2261 1 10.00 (1 vote)
Completed this today. Thanks to Rich who welds aluminum a heck of alot better than me!  |
|
| 1972 Facelift radiator grille Badge
ddgonzal Body and Interiors 2011/2/6 20:18 Tell a friend
1617 0 0.00 (0 votes)
|
| 1972 Facelift Grille for Sedan
ddgonzal Body and Interiors 2011/2/6 20:16 Tell a friend
1528 0 0.00 (0 votes)
|
| 1972 Grille (minor facelift)
ddgonzal Body and Interiors 2011/2/6 20:14 Tell a friend
1470 0 0.00 (0 votes)
| See [url=http://datsun1200.com/modules/mediawiki/index.php?title=Grille[/url] |
|
| K-MAC Camber Kit
ddgonzal Suspension 2011/2/6 3:06 Tell a friend
2094 0 0.00 (0 votes)
| K-MAC "Maximum Adjustment Camber Kits -- the strong ones" |
|
| WARTUNGSANLEITUNG
ddgonzal Brochures 2011/2/6 2:59 Tell a friend
1223 0 0.00 (0 votes)
|
| Block Breather
ddgonzal Engine 2011/2/6 2:52 Tell a friend
2538 2 0.00 (0 votes)
|
| BIG HELLO YOU ALL from FAZPIOES
FAZPIOES Body and Interiors 2011/2/5 20:12 Tell a friend
1925 2 0.00 (0 votes)
Hello ALL DATSUN FRIENDS
LONG TIME not coming here .
Heard you Australians are UNDER WATER . . .
Datsun 120 Y needs an upgrade on Engine & Gear
Box here some pics of the BEFORE : : : |
|
| Rear 18*8
___1200ute Wheels 2011/2/3 23:50 Tell a friend
3110 5 0.00 (0 votes)
| Guard needs to be lipped a little more |
|
| Rear 18*8
___1200ute Wheels 2011/2/3 23:48 Tell a friend
1846 1 0.00 (0 votes)
|
| New Wheels
___1200ute Wheels 2011/2/3 23:47 Tell a friend
1729 0 0.00 (0 votes)
| Work Wheels 17*7 fronts and 18*8 rears. |
|
| Supercharger Pipe
datsa73 Drag 2011/2/3 6:21 Tell a friend
2158 0 0.00 (0 votes)
| This has been a lot of work! Figured I'd do it right this time. This car is getting closer to being done. |
|
| B120 Final Drive (H165)
ddgonzal Drive Train 2011/2/2 7:26 Tell a friend
2191 0 0.00 (0 votes)
See [url=http://datsun1200.com/modules/mediawiki/index.php?title=H165]H165]
Japan Parts Catalog 1971-1974 |
|
| Roll Cage
datsa73 Drag 2011/1/31 23:49 Tell a friend
2197 0 0.00 (0 votes)
| Picked this up at a friends place. He was getting rid of stuff. Full cage but I'm only going with a half cage. Cut it down to fit it in the back of my truck. After a few mods, it will work perfectly! |
|
| Racing Seats
datsa73 Body and Interiors 2011/1/31 23:44 Tell a friend
1894 3 0.00 (0 votes)
Scored these on Craigslist for $150.
These are going to work sweet! |
|
| painted bar,grill and bolt ons finally:).02
greendog greendog 2011/1/31 4:29 Tell a friend
2980 4 0.00 (0 votes)
| car is dirty as,probably should of washed it.meh |
|
