| Blown headgasket
 kululadotgroen  Misc  2008/6/20 0:13  Tell a friend
 1403  1  0.00 (0 votes)
| Blew the gasket while it was on the dyno... |
|
| New dyno chart
kululadotgroen Misc 2008/6/20 0:10 Tell a friend
1786 9 0.00 (0 votes)
| Car went for dyno on Wednesday, after some changes |
|
| Colortune
kululadotgroen Misc 2008/6/19 23:21 Tell a friend
1267 1 0.00 (0 votes)
| Spark plug with a transparent insulator. |
|
| DAMAGED
Velociti Misc 2008/6/19 16:26 Tell a friend
1519 6 0.00 (0 votes)
| I spotted this damaged UTE at the panelbeaters were I picked up my UTE today. They had to replace my gearbox again. |
|
| ZigZags
ZigZag Wallpapers 2008/6/19 11:33 Tell a friend
2856 3 0.00 (0 votes)
|
| strut bar
frankthedolphintrainer Misc 2008/6/19 8:28 Tell a friend
1488 1 0.00 (0 votes)
|
| strut bar
frankthedolphintrainer Misc 2008/6/19 8:28 Tell a friend
1526 3 0.00 (0 votes)
|
| strut bar
frankthedolphintrainer Misc 2008/6/19 8:27 Tell a friend
1506 1 0.00 (0 votes)
|
| Looks a little more compact with the tighter headers.
nsr500 Engine 2008/6/19 1:32 Tell a friend
1954 1 0.00 (0 votes)
| If ya got a big, a really big hammer , you can make anything fit. LOL. |
|
| Making it smaller.
nsr500 Engine 2008/6/19 1:26 Tell a friend
1853 1 0.00 (0 votes)
Got some P38 headers off Ebay for 99$.
Got em for the flanges but if they fit the car the way I want, I'll just use em the way they are.
Also put on the v6 timing cover, lowers the water pump a bunch and looks better. |
|
| Old UTE
Velociti Misc 2008/6/18 14:07 Tell a friend
1503 1 0.00 (0 votes)
| Spotted it in Welkom this afternoon |
|
| 120Y
Velociti Misc 2008/6/18 14:06 Tell a friend
1401 1 0.00 (0 votes)
| Spotted it in Welkom this afternoon |
|
| Sunny 1000 good side
beattie Misc 2008/6/18 11:46 Tell a friend
4826 15 0.00 (0 votes)
| Dont know why but this pic just works! Needed to upload it somehwere to show it off! I dont really have that many good pics of the car up here anyway! |
|
| Sunny 1000 - Good quality pic!
beattie Misc 2008/6/18 11:43 Tell a friend
2041 1 0.00 (0 votes)
| Just a good pic showing off the colour of the wagon. Somebody has asked me what colour its called... And it has no official name, its just a custom red. Similer to the new Toyota Rav4 red i think. |
|
| Sunny 1000
beattie Misc 2008/6/18 11:40 Tell a friend
1760 1 0.00 (0 votes)
| Just a good pic showing off the colour of the wagon. Somebody has asked me what colour its called... And it has no official name, its just a custom red. Similer to the new Toyota Rav4 red i think. |
|
| Kroonstad GX 1
Velociti Misc 2008/6/18 9:31 Tell a friend
1836 1 0.00 (0 votes)
| Spotted in Kroonstad, South Africa. |
|
| Kroonstad GX 2
Velociti Misc 2008/6/18 9:30 Tell a friend
1929 1 0.00 (0 votes)
| Spotted in Kroonstad, South Africa. |
|
| New use for the lip on a UTE
Velociti Misc 2008/6/18 9:28 Tell a friend
1724 6 0.00 (0 votes)
|
| white line suspension swaybar chart
benny benny 2008/6/18 6:43 Tell a friend
3815 3 0.00 (0 votes)
| white line suspension swaybar chart |
|
| Fusible Link
ddgonzal Mechanical 2008/6/18 6:31 Tell a friend
3222 2 0.00 (0 votes)
|
| First run
vixen Track 2008/6/18 2:39 Tell a friend
1932 1 0.00 (0 votes)
| The coupes first race meeting at Stanthorpe,May 08'.All went well,much quicker than the commodore |
|
| Strut spacers
ddgonzal Suspension 2008/6/17 5:48 Tell a friend
2998 9 0.00 (0 votes)
|
| Sunny Truck Tray
ddgonzal Misc 2008/6/17 5:46 Tell a friend
1294 1 0.00 (0 votes)
|
| Canby 2008: Datsun 1000
ddgonzal Meetings 2008/6/16 18:25 Tell a friend
2364 3 0.00 (0 votes)
|
| Canby 2008: Lots of A-series Stuff
ddgonzal Meetings 2008/6/16 18:24 Tell a friend
2597 1 0.00 (0 votes)
| Venolia 77 mm pistons, ARP rod bolts |
|
| Canby 2008: Bryon's 1200 2-dr sedan
ddgonzal Meetings 2008/6/16 18:16 Tell a friend
1933 1 0.00 (0 votes)
|
| Canby 2008: Early Datsuns
ddgonzal Meetings 2008/6/16 18:15 Tell a friend
2039 1 0.00 (0 votes)
|
| Canby 2008: 1200 in sea of 510s
ddgonzal Meetings 2008/6/16 18:13 Tell a friend
1908 1 0.00 (0 votes)
| This one is for sale, see for sale page |
|
| Canby 2008: Early Datsuns
ddgonzal Meetings 2008/6/16 18:12 Tell a friend
2198 1 0.00 (0 votes)
| 2nd prize: B10. 1st prize: 610 with KA24 |
|
| Papa Bear, Mama Bear, Baby Bear
ddgonzal Meetings 2008/6/16 18:08 Tell a friend
2771 10 0.00 (0 votes)
| Canby 2008: B10 and 510 pulled by F350. |
|
| B10 in WA
ddgonzal Meetings 2008/6/16 18:06 Tell a friend
2030 1 0.00 (0 votes)
| Datsun 1000 at Canby 2008 |
|
| Canby 2008: 450 miles, only one accident
ddgonzal Misc 2008/6/16 18:05 Tell a friend
1589 1 0.00 (0 votes)
| black marks on body from tire |
|
| Canby - Gary_P's 1200
ddgonzal Meetings 2008/6/16 18:01 Tell a friend
1804 1 0.00 (0 votes)
|
| Datsun 1200 sticker
Tel Body and Interiors 2008/6/16 9:32 Tell a friend
1742 5 0.00 (0 votes)
A 'datsun 1200' sticker i made.
Took me ages to do :D had to line up 3 layers and it was the first sticker from scratch i've done.
And reaching over to the window wasn't that easy I'm pretty short.
The white is made of reflective vinyl :D
Cost me $0 and 0 cents |
|
| Gearbox
Tel Drive Train 2008/6/15 15:27 Tell a friend
1670 1 0.00 (0 votes)
Inside look after i peeled away the rubber boot off my gear shift.
Datsun 1200 ute, B120 1980 |
|
| 20mm rear swaybar 2
Daveman Forum 2008/6/15 11:08 Tell a friend
1715 1 0.00 (0 votes)
|
| 20mm rear swaybar
Daveman Forum 2008/6/15 11:08 Tell a friend
2453 10 0.00 (0 votes)
|
| 25mm front swaybar 2
Daveman Forum 2008/6/15 11:07 Tell a friend
1558 1 0.00 (0 votes)
|
| 25mm front swaybar
Daveman Forum 2008/6/15 11:06 Tell a friend
1651 8 0.00 (0 votes)
|
| Distributor Plug
ddgonzal Engine 2008/6/15 6:32 Tell a friend
2323 2 0.00 (0 votes)
|
| No Dizzy
ddgonzal Engine 2008/6/15 6:29 Tell a friend
2244 2 0.00 (0 votes)
|
| Kb10 grille badge on Yahoo
sidedraught Misc 2008/6/14 22:33 Tell a friend
1987 6 0.00 (0 votes)
| Optional grille bade for the KB10. |
|
| my new ally drop tank
Gypsy Misc 2008/6/14 11:37 Tell a friend
2332 6 0.00 (0 votes)
| finished friday installed 2day and it works |
|
| Offenhauser 4bbl manifold top view
revhead001 Engine 2008/6/14 8:21 Tell a friend
1768 1 0.00 (0 votes)
| You can see the port dividers clearly from here. The loewr section is the primarys ane the upper is the secondaries. This is a very rare manifold indeed. |
|
| Offenhauser 4bbl manifold front wiew
revhead001 Engine 2008/6/14 8:19 Tell a friend
2154 2 0.00 (0 votes)
| If you look closely you will see a divider to seperate the primary from the secondarys. Bottom is primary and has approx 30% of the volume. Theory goes that when you are driving on the primarys throttle response will be increased as only the lower 30% of the manifold will be used until the secondaries open. |
|
| Offenhauser 4bbl manifold and 390 holley
revhead001 Engine 2008/6/14 8:14 Tell a friend
2416 3 0.00 (0 votes)
| This is the new carb setup for the panelvan. Old school!! |
|
| Lamborghini paddle shift gearbox
revhead001 Drive Train 2008/6/14 3:00 Tell a friend
3552 9 0.00 (0 votes)
| I know that it is not datsun related but it is very interesting. Holinger have just finished the gearbox and although it is not their first Lamborghini Gallarto gearset and sequential shifter assy it is their first pneumatic shifter. The shifter could be adapted to any of their existing remote shift mechanisms and in theory could downshift 6 gears in approx 3 seconds. |
|
| holinger 9 inch housing opened up
revhead001 Drive Train 2008/6/13 12:56 Tell a friend
1685 1 0.00 (0 votes)
| It looks like it would be a pain to set up but it only weighs a few kilos. |
|
| Holinger's alloy independant 9 inch housing.
revhead001 Drive Train 2008/6/13 12:42 Tell a friend
1897 3 0.00 (0 votes)
| It has an alloy pinion support and side adjusters. We don't make the axles to suit though. You would think that it could be adapted to a datsun! |
|
| 19,500 actual mile 1978 B210 (garaged survivor)
HossCartright Members 2008/6/13 12:32 Tell a friend
1898 3  9.00 (1 vote)
|
| Low comp piston
dat141 Engine 2008/6/13 11:50 Tell a friend
2511 6 0.00 (0 votes)
| This was caused by a lean out at the end of the straight at eastern creek. |
|
| 4 hole rear bracket
3Rotor Brakes 2008/6/13 9:04 Tell a friend
2184 1 0.00 (0 votes)
| here is a 4 hole bracket, with the option of going with 240mm or 250mm disk diameters. |
|
| for dat87, 2
steveo steveo 2008/6/13 6:42 Tell a friend
1670 1 0.00 (0 votes)
|
| for dat87
steveo steveo 2008/6/13 6:36 Tell a friend
1777 1 0.00 (0 votes)
| longwheel base ute for sale |
|
| My Latest Purchase
nismo Misc 2008/6/12 5:18 Tell a friend
2141 8 0.00 (0 votes)
Hi all you datto fans.
Well here is a pic of my latest purchase.
No it's not another 120y coupe unfortunately, but a 120y sedan.
I went out to a wreckers to find another brake booster for my brothers ke20 corolla, and came across this sitting in their yard.
I just couldn't resist myself from buying it, mainly for front end parts for my 120y coupe's.
It's a 1977 a12 4 speeed with borgwarner diff. The motor runs very sweet and quiet.
|
|
| New coupe
71coupe Misc 2008/6/11 15:47 Tell a friend
1467 2 0.00 (0 votes)
| Picked up this genuine nardi for it today. I love the look of these. Now in the hunt for some deep dish 13's or may go steelies whith the thin whitewalls. |
|
| My new coupe
71coupe Engine 2008/6/11 15:41 Tell a friend
2059 4 0.00 (0 votes)
| Engine bay, nice and tidy. |
|
| My new coupe
71coupe Body and Interiors 2008/6/11 15:38 Tell a friend
1534 1 0.00 (0 votes)
| Interior, going to get rid of that crappy steering wheel. |
|
| My new coupe
71coupe Body and Interiors 2008/6/11 15:34 Tell a friend
1425 2 0.00 (0 votes)
|
| My new coupe
71coupe Body and Interiors 2008/6/11 15:27 Tell a friend
1420 3 0.00 (0 votes)
|
| 1200 sedan
BigEd Misc 2008/6/11 7:57 Tell a friend
1655 2 0.00 (0 votes)
| well just finished getting the 60 5 speed in, next on the to do list paint..... |
|
| H150 LSD
clyons8 Misc 2008/6/10 10:51 Tell a friend
3517 10 0.00 (0 votes)
| Here it is Andy/Dodgeman. |
|
| FS5W60A 5-speeds in there?
clyons8 Misc 2008/6/10 10:47 Tell a friend
2598 8 0.00 (0 votes)
|
| 3 mighty datsuns
Tommy Misc 2008/6/10 9:20 Tell a friend
2192 13 0.00 (0 votes)
| just browsing through some old pics, i didnt mind this 1. |
|
| BACK IN BLACK
StealthUnderRadar Misc 2008/6/9 12:16 Tell a friend
1570 4 0.00 (0 votes)
| Top says it all,Cheers Peter |
|
| 1400 Ute rear disk
3Rotor Brakes 2008/6/9 10:46 Tell a friend
1815 1 0.00 (0 votes)
| here the Bracket is bolted to the diff. |
|
| 1400 Ute rear disk
3Rotor Brakes 2008/6/9 10:45 Tell a friend
3140 6 0.00 (0 votes)
| here the Bracket is bolted to the diff. |
|
| rear disk with 13" rim
3Rotor Brakes 2008/6/9 10:36 Tell a friend
1948 3 0.00 (0 votes)
| yip what do you know, a 13" rim slides over this one with allmost 15mm to spare.... |
|
| Griffo's 120Y
griffo Misc 2008/6/9 9:14 Tell a friend
1597 1 0.00 (0 votes)
| Same khanacross as before |
|
| Griffo's 120Y
griffo Misc 2008/6/9 9:13 Tell a friend
1265 2 0.00 (0 votes)
| 1st outing Khanacross 2nd place |
|
| Griffo's 120Y
griffo Misc 2008/6/9 9:03 Tell a friend
1164 1 0.00 (0 votes)
| Sory last time i put it on it was the wrong way |
|
| CA18 1600 d
Lachie Misc 2008/6/9 6:50 Tell a friend
1353 1 0.00 (0 votes)
|
| CA18 1600 c
Lachie Misc 2008/6/9 6:50 Tell a friend
1664 3 0.00 (0 votes)
|
| CA18 1600 b
Lachie Misc 2008/6/9 6:49 Tell a friend
1375 1 0.00 (0 votes)
|
| CA18 1600 a
Lachie Misc 2008/6/9 6:49 Tell a friend
1425 1 0.00 (0 votes)
|
| radiator
dino75 dino75 2008/6/9 3:07 Tell a friend
2077 1 0.00 (0 votes)
| 2.6 sigma radiator for 1200 |
|
| rear caliper brackets
3Rotor Brakes 2008/6/8 19:24 Tell a friend
1764 1 0.00 (0 votes)
| The nice laser-cut brackets for fitting Maxima rear calipers to a Ute's diff. these are nice, as they allow you to easily get the calipers nicely lined up with the disk, then just tighten to 2 small nuts and it's all done. |
|
| rear caliper brackets
3Rotor Brakes 2008/6/8 19:24 Tell a friend
1714 1 0.00 (0 votes)
| The nice laser-cut brackets for fitting Maxima rear calipers to a Ute's diff. these are nice, as they allow you to easily get the calipers nicely lined up with the disk, then just tighten to 2 small nuts and it's all done. |
|
| rear caliper brackets
3Rotor Brakes 2008/6/8 19:23 Tell a friend
4721 17 0.00 (0 votes)
| The nice laser-cut brackets for fitting Maxima rear calipers to a Ute's diff. these are nice, as they allow you to easily get the calipers nicely lined up with the disk, then just tighten to 2 small nuts and it's all done. |
|
| rear caliper brackets
3Rotor Brakes 2008/6/8 19:23 Tell a friend
1732 1 0.00 (0 votes)
| The nice laser-cut brackets for fitting Maxima rear calipers to a Ute's diff. these are nice, as they allow you to easily get the calipers nicely lined up with the disk, then just tighten to 2 small nuts and it's all done. |
|
| B310 steering knuckles
ddgonzal Suspension 2008/6/8 6:50 Tell a friend
2501 3 0.00 (0 votes)
| 80mm centers for 50.8 struts |
|
| Clarion Radio RN-1006M
ddgonzal Body and Interiors 2008/6/8 6:18 Tell a friend
2311 4 0.00 (0 votes)
|
| 1994 cylinder head
ddgonzal Engine 2008/6/8 5:52 Tell a friend
2512 1 0.00 (0 votes)
|
| 1994 cylinder head
ddgonzal Engine 2008/6/8 5:51 Tell a friend
2189 1 0.00 (0 votes)
|
| 1994 cylinder head
ddgonzal Engine 2008/6/8 5:48 Tell a friend
2442 5 0.00 (0 votes)
|
| B10 sports handle
ddgonzal Body and Interiors 2008/6/8 5:47 Tell a friend
3132 32 0.00 (0 votes)
| Datsun 1000 option steering wheel |
|
| b210 (301)
swet911 Members 2008/6/8 4:56 Tell a friend
2164 1 0.00 (0 votes)
|
| This is why.
nsr500 Misc 2008/6/8 4:49 Tell a friend
1313 1 0.00 (0 votes)
Cuz he could have been in the nice worm house ( must have been 20'F outside that day), could have been playing a video game or something, but he was out there with me, hepling.
And thats what it's all about friends! |
|
| had to try em to see how it looked.
nsr500 Wheels 2008/6/8 0:27 Tell a friend
2194 2 0.00 (0 votes)
| They didn't look that small in the pix before I ordered em. Stuck with em now. |
|
| Just wanted to see what it looked like.
nsr500 Wheels 2008/6/8 0:23 Tell a friend
2953 9 0.00 (0 votes)
| Not sure if I like it or not. It will make sense when the V8 goes in. |
|
| before
Pendles Misc 2008/6/7 9:10 Tell a friend
1473 3 0.00 (0 votes)
|
| Redding Roller Red
ddgonzal Classifieds 2008/6/7 5:09 Tell a friend
1053 1 0.00 (0 votes)
|
| Redding Roller
ddgonzal Classifieds 2008/6/7 5:08 Tell a friend
1092 1 0.00 (0 votes)
|
| wheels
wardat Wheels 2008/6/6 22:49 Tell a friend
3337 4 0.00 (0 votes)
| b45 simmons compaired with trx rims. |
|
| Win a 2008 Nissan 1400 Bakkie 1
Velociti Misc 2008/6/6 15:24 Tell a friend
1714 1 0.00 (0 votes)
| All you have to do it play the slot machines at Naledi Sun Casino in Thaba Nchu near Bloemfontien and hit a 777. |
|
| Win A 2008 Nissan 1400 Bakkie 2
Velociti Misc 2008/6/6 15:23 Tell a friend
3241 16 0.00 (0 votes)
| All you have to do it play the slot machines at Naledi Sun Casino in Thaba Nchu near Bloemfontien and hit a 777. |
|
| Datsun build plate
Marko Misc 2008/6/6 14:06 Tell a friend
1330 1 0.00 (0 votes)
|
| 4revhead001
StealthUnderRadar datsun120ycoupe 2008/6/6 12:00 Tell a friend
1716 1 0.00 (0 votes)
No the blue one not mine
But this is Cheers Peter |
|
| Grand Mar,saidOwner Driver Granny,wink
StealthUnderRadar datsun120ycoupe 2008/6/6 10:46 Tell a friend
1721 6 0.00 (0 votes)
| Lot of nice boys on this site,so she wanted to show off her b loved 120y,thanks too,me Peter. Cheers all Peter |
|
| reset rear springs
pepper pepper 2008/6/6 8:50 Tell a friend
1752 8 0.00 (0 votes)
| got the springs back from the blacksmith today, sits perfectly. cost $170 at bayside springs and blacksmithing. |
|
