| 1000 disk brake conversion
 LAGWAGON  LAGWAGON  2008/1/20 5:53  Tell a friend
 4428  5  0.00 (0 votes)
|
| 1000 disk brake conversion
LAGWAGON LAGWAGON 2008/1/20 5:52 Tell a friend
2948 1 0.00 (0 votes)
|
| 1200 Truck Lock Set
ddgonzal Body and Interiors 2008/1/20 5:51 Tell a friend
2082 2 0.00 (0 votes)
Key style is '86 up.
* Ignition
* Doors
* Fuel door |
|
| Aircon 3
ddgonzal Body and Interiors 2008/1/20 5:35 Tell a friend
2069 0 0.00 (0 votes)
|
| Aircon 2 - Blower
ddgonzal Body and Interiors 2008/1/20 5:33 Tell a friend
2403 1 0.00 (0 votes)
|
| Aircon 1 Condensor
ddgonzal Body and Interiors 2008/1/20 5:31 Tell a friend
2157 1 0.00 (0 votes)
| Condensor is mounted to the right of the radiator (left side of picture) |
|
| late model B122 distributor
ddgonzal Engine 2008/1/20 4:59 Tell a friend
2940 0 0.00 (0 votes)
|
| late model B122 distributor
ddgonzal Engine 2008/1/20 4:58 Tell a friend
4489 4 0.00 (0 votes)
|
| A14/A15 oval-port head
ddgonzal Engine 2008/1/20 4:50 Tell a friend
3470 1 0.00 (0 votes)
| Medium size ovals (smaller than GX ports) |
|
| GX
Trix Misc 2008/1/19 19:49 Tell a friend
1430 3  9.00 (1 vote)
| Here is a pic of my a15 after I fitted the new front shocks and 25mm lowering blocks at the rear. Ride is so much better than before and I can actually go over speed bumps! I will not lower it again. |
|
| 5 speed gearbox
dat141 Drive Train 2008/1/19 8:28 Tell a friend
8023 15 0.00 (0 votes)
| Toyota T50 with a 56 series bellhousing. |
|
| Red 1972 Coupe
ddgonzal Classifieds 2008/1/18 20:54 Tell a friend
1665 6 0.00 (0 votes)
|
| GX
Trix Misc 2008/1/18 16:53 Tell a friend
1342 1 0.00 (0 votes)
| This is what the dash used to look like... |
|
| GX
Trix Misc 2008/1/18 16:49 Tell a friend
1434 5 0.00 (0 votes)
| Painted the dash today and fited gauges and new revcounter! Just need to wire it up now. |
|
| GX
Trix Misc 2008/1/18 16:46 Tell a friend
1403 1 0.00 (0 votes)
| Got the new Golf rad fitted , cut away the cradle to allow for good airflow. Just need to finalise all hoses ... sorry about quality of pic, was a bit dark... |
|
| GX
Trix Misc 2008/1/18 16:43 Tell a friend
1321 1 0.00 (0 votes)
| Anther pic to show how much was cut out to allow the new Golf rad in the GX |
|
| GX
Trix Misc 2008/1/18 16:41 Tell a friend
2207 1 0.00 (0 votes)
| Here is the old 1200 radiator and fan from my GX A15 motor. Only realize now how small this rad really is , no wonder the car always ran hot! Sorry about quality of pic, the light was not too ... I now need to get some bends according to the wire sample I made and then connect all pipes. |
|
| 1000 brake uprade
LAGWAGON LAGWAGON 2008/1/18 8:27 Tell a friend
2585 1 0.00 (0 votes)
| early sigma caliper and disk on 1200 coupe hub |
|
| 1000 brake upgrade
LAGWAGON LAGWAGON 2008/1/18 8:26 Tell a friend
2750 2 0.00 (0 votes)
| sigma bracket modified to fit 1000 stub |
|
| 1 3/4 inch SU adaptor plates
Freak Freak 2008/1/17 10:00 Tell a friend
2382 4 0.00 (0 votes)
| Coverted the 1 3/4 to suit 1 1/2 manifold |
|
| the gti
fat910 Misc 2008/1/16 4:15 Tell a friend
1737 1 0.00 (0 votes)
| this is the one i want to swap |
|
| my gti
fat910 Misc 2008/1/16 3:13 Tell a friend
1658 1 0.00 (0 votes)
| this is the gti i am wishing to swap |
|
| for sale 1970 datsun 521 restored
elpingu777 Classifieds 2008/1/15 18:03 Tell a friend
2973 4 0.00 (0 votes)
| beautiful restored datsun 521 this truck is one of a kind frame up restoration show winner 786 308 7672 johnny |
|
| on the rack
kelmo Suspension 2008/1/14 14:26 Tell a friend
2402 1 0.00 (0 votes)
| on the rack for alignment. The car was almost too small for the rack |
|
| suspension
kelmo Suspension 2008/1/14 14:24 Tell a friend
3566 1 0.00 (0 votes)
| replaced most bits, cleaned and painted others |
|
| Black Datsun 1200 coupe
chris1200t Members 2008/1/13 23:02 Tell a friend
2770 11  10.00 (1 vote)
|
| 3 bolt themostat housing gasket
frankthedolphintrainer Engine 2008/1/13 11:05 Tell a friend
2309 4 0.00 (0 votes)
| 3 bolt themostat housing gasket i think. well its definetely for a series. |
|
| A12A Engine, Front
ddgonzal Engine 2008/1/13 9:59 Tell a friend
2299 1 0.00 (0 votes)
| 3-bolt thermostat housing |
|
| B110 Engine
ddgonzal Engine 2008/1/13 9:57 Tell a friend
3102 1 0.00 (0 votes)
|
| 13/1/2008 Perth Cruise 4
beattie Perth events 2008/1/13 7:48 Tell a friend
2861 2 0.00 (0 votes)
|
| 13/1/2008 Perth Cruise 3
beattie Perth events 2008/1/13 6:45 Tell a friend
3717 9 0.00 (0 votes)
| And we let the other Sunnys in for a photo shoot too... Its only fair. |
|
| 13/1/2008 Perth Cruise 2
beattie Perth events 2008/1/13 6:44 Tell a friend
3126 4 0.00 (0 votes)
| At the end of the run in Bells Rapids. All the perty 1000s lined up! |
|
| 13/1/2008 Perth Cruise 1
beattie Perth events 2008/1/13 6:43 Tell a friend
3368 13 0.00 (0 votes)
| At the meet location in Kalamunda. |
|
| Smoooothh as
FRKYCA Misc 2008/1/13 3:47 Tell a friend
2238 8 0.00 (0 votes)
Just a pic before i layed down the blue,a lot of work and sanding went in to this... and im not a painter, im a forkie LOL
Im painting the ute as well. |
|
| B110 Thermostat
ddgonzal Engine 2008/1/12 23:07 Tell a friend
2105 1 0.00 (0 votes)
| gasket goes to housing side |
|
| A15 Crankcase breather
TomMcKay Engine 2008/1/12 22:48 Tell a friend
2101 6 0.00 (0 votes)
|
| Jiggle-Type Thermostat
ddgonzal Engine 2008/1/12 20:56 Tell a friend
2160 1 0.00 (0 votes)
|
| B310 Thermostat Housing Comparo
ddgonzal Engine 2008/1/12 20:54 Tell a friend
2087 1 0.00 (0 votes)
|
| B310 Thermostat Housing
ddgonzal Engine 2008/1/12 20:53 Tell a friend
1995 1 0.00 (0 votes)
|
| Thermostat Housing Comparo
ddgonzal Engine 2008/1/12 20:52 Tell a friend
2076 1 0.00 (0 votes)
| 2-bolt Type vs. 4-bolt Type |
|
| twincam racer!
Trix Misc 2008/1/12 19:39 Tell a friend
1519 1 0.00 (0 votes)
| My mates twincam toyota engined racer just completed this week! Sorry not Datto related but I thought you would like to see!! his other car is a GX with the same engine setup though!! |
|
| Thermostat Direction
ddgonzal Engine 2008/1/12 18:34 Tell a friend
2887 1 0.00 (0 votes)
| Be sure to put it in this direction |
|
| GX
Trix Misc 2008/1/12 18:25 Tell a friend
1674 4 0.00 (0 votes)
Got this new plastic Golf Radiator to fit in my GX. It is twice the size of the old 1200 radiator which is way too small for the A15.
|
|
| trix - new tonnau cover for test fit....
Trix Misc 2008/1/12 18:16 Tell a friend
1471 1 0.00 (0 votes)
| ...been busy in between finishing off tonnau cover for trix as wel.....stiil some work to be done. must shave the tonnau cover hooks and rear valance before i can fit it. I just hope it does not look like a "shopping trolley" with the wing... can always take it off again, but why not? just playing... as always. |
|
| GX
Trix Misc 2008/1/12 18:04 Tell a friend
1652 1 0.00 (0 votes)
| Another shot to show the difference between a good coil and the one that was remved from my GX today. It now feels much better on the road. The ride height is also good and i will not be talked into lowering it further again! Will now also remove the 50mm rear blocks and replace with 25MM blocks which will level the car. Will post a pic ones I done here... |
|
| GX
Trix Misc 2008/1/12 18:00 Tell a friend
1860 5 0.00 (0 votes)
| The old coils I removed, can not believe it looked like this!! |
|
| GX
Trix Misc 2008/1/12 17:58 Tell a friend
1717 1 0.00 (0 votes)
| Out with the struts to replace old shocks and a better set of coils as the olds ones are really wrecked! |
|
| GX
Trix Misc 2008/1/12 17:56 Tell a friend
1467 1 0.00 (0 votes)
| I have been gathering a few parts to fit to the GX again.... new front shocks, new revcounter, new radiator. I now need a new electric fan... time to have some fun again! |
|
| Ute tool box 5
RATBOY Classifieds 2008/1/12 10:52 Tell a friend
1419 1 0.00 (0 votes)
| Custom made alloy tool box and carry racks. |
|
| Ute tool box 4
RATBOY Classifieds 2008/1/12 10:50 Tell a friend
1388 1 0.00 (0 votes)
| Custom made alloy tool box and carry racks. |
|
| Ute tool box 3
RATBOY Classifieds 2008/1/12 10:48 Tell a friend
1436 1 0.00 (0 votes)
| Custom made alloy tool box and carry racks. |
|
| Ute alloy tool box 2
RATBOY Classifieds 2008/1/12 10:44 Tell a friend
1364 1 0.00 (0 votes)
| Custom made alloy tool box and carry racks. |
|
| Ute tool box
RATBOY Classifieds 2008/1/12 10:40 Tell a friend
1443 1 0.00 (0 votes)
| Custom made alloy tool box and carry racks. |
|
| Race Car '00'
ddgonzal Classifieds 2008/1/12 7:39 Tell a friend
1444 1 0.00 (0 votes)
|
| wagon conversion coming along nicely 4
picko Misc 2008/1/12 7:24 Tell a friend
2863 5 0.00 (0 votes)
|
| wagon conversion coming along nicely 3
picko Misc 2008/1/12 7:22 Tell a friend
1546 1 0.00 (0 votes)
|
| wagon conversion coming along nicely 2
picko Misc 2008/1/12 7:17 Tell a friend
1476 2 0.00 (0 votes)
| factory datsun cross member |
|
| wagon conversion coming along nicely 1
picko Misc 2008/1/12 7:12 Tell a friend
2646 2 0.00 (0 votes)
| tunel mods for rotary conversion |
|
| Modified Clutch Bearing Carrier
TomMcKay Drive Train 2008/1/11 22:54 Tell a friend
2803 4 0.00 (0 votes)
| Clutch release bearing carrier extended from 43.5 to 47mm. |
|
| Amongst It
datman55 datman55 2008/1/11 3:15 Tell a friend
1905 5 0.00 (0 votes)
| Coming out of Turn one at Wakefield Park and trying to get past the Pesky V8 Commodore that was holding me up, while dealing with an even peskier RX7 trying to get by me also! |
|
| Heavy Braking at Wakefield
datman55 datman55 2008/1/11 3:02 Tell a friend
1975 5 0.00 (0 votes)
| Running the new 50 series tyres has let me get the car much closer the ground..... This shot is coming into turn one at Wakefield Park under heavy braking. We hit about 185 kph on the straight before turning through the kink and standing on the brakes! |
|
| the burnout car
perthute Misc 2008/1/10 11:28 Tell a friend
2316 12 0.00 (0 votes)
front brakes only ,locker , a15 ,
want a hell big raditor for it |
|
| datsun lock
12undies Misc 2008/1/10 5:57 Tell a friend
2571 4 0.00 (0 votes)
| how cool is this i found it in my shed might sell it on ebay lol jokes |
|
| Sounds
coldboiled Members 2008/1/10 1:43 Tell a friend
2008 2 0.00 (0 votes)
| Lame sound setup i got in the rear parcel tray. Overboard i think |
|
| Old Setup
coldboiled Members 2008/1/10 1:41 Tell a friend
1989 4 0.00 (0 votes)
| This is the old setup i had in my datsun. Then Everything got ripped out and started again. |
|
| Another Engine Shot
coldboiled Members 2008/1/10 1:39 Tell a friend
1772 1 0.00 (0 votes)
| Just a front on view. You can see my custom pulleys i made and what not. |
|
| My Fuel set up
coldboiled Members 2008/1/10 1:37 Tell a friend
1950 5 0.00 (0 votes)
| Fill it in the boot to. Fuel latch is shaven Just like all the handles and key holes and everything elese that could be. Bonet latch gone to haha |
|
| My Engine
coldboiled Members 2008/1/10 1:35 Tell a friend
1812 1 0.00 (0 votes)
| Its my engine. A bit dirty but you can see all the custom work ive done to it. |
|
| Fanta Orange 2-Door Sedan
ddgonzal Classifieds 2008/1/9 18:42 Tell a friend
2352 5 0.00 (0 votes)
|
| New Toy
R-fastmotorsport Track 2008/1/9 12:06 Tell a friend
2763 11 0.00 (0 votes)
| A new toy has arrived and will be an interesting project for a while! IPRA log booked and ready to race after some TLC - should be fun!! |
|
| my ute before got stolen
madhatter3484 Misc 2008/1/9 11:53 Tell a friend
1845 4 0.00 (0 votes)
|
| bride replices
madhatter3484 Misc 2008/1/9 11:16 Tell a friend
1428 2 0.00 (0 votes)
| these are my bride fixed back replices |
|
| And back where it belongs...
kululadotgroen Misc 2008/1/9 9:06 Tell a friend
3458 13 0.00 (0 votes)
| Finally found some NA tappet covers, and used those in favor of the SC ones. Gives a nice effect with the letters standing out like that. Also added a breather filter which matches the dump valve. Added some anti freeze this time around. |
|
| Assembling the engine...
kululadotgroen Misc 2008/1/9 9:04 Tell a friend
1916 1 0.00 (0 votes)
| Here we are just ready to put on the oil pan. It been running for 3 weeks now, and at 8 psi at times, and no oil leaks or sweating arounnd any of the gaskets. |
|
| Some trouble in the sleeves...
kululadotgroen Misc 2008/1/9 9:01 Tell a friend
1540 1 0.00 (0 votes)
| Here you can see after a hone that there was some rust, probably from when it was transported via sea, and some water got in there. Anyway it didn't use oil before, and no smoking, so it'll have to run like this again. And it is, still no smoking, and using no oil what so ever. |
|
| Combustion chamber looking good...
kululadotgroen Misc 2008/1/9 8:55 Tell a friend
1672 1 0.00 (0 votes)
| This is what all the chambers looked like, no oil residue, and good clean burn on all the valves. |
|
| carter black
shaun Misc 2008/1/9 6:27 Tell a friend
1360 1 0.00 (0 votes)
|
| gt30 and waste gate
shaun Misc 2008/1/9 6:26 Tell a friend
1943 9 0.00 (0 votes)
picked this up for my new project ute
garrett gt30 and 38mm turbosmart external |
|
| my new project
shaun Misc 2008/1/9 6:24 Tell a friend
1940 12 0.00 (0 votes)
picked this ute up pretty cheap it was partly started body wise but i still had alot to do
will get more pics up as i paint it |
|
| twin su airbox
pepper pepper 2008/1/8 6:31 Tell a friend
1772 1 0.00 (0 votes)
|
| Steering box brace
sikyne Mechanical 2008/1/8 1:12 Tell a friend
4343 8 0.00 (0 votes)
| A brace made from chromoly plate |
|
| EFI Manifold for Twin cam conversion
sikyne Fuel Injection 2008/1/8 0:56 Tell a friend
2422 5 0.00 (0 votes)
|
| EFI Manifold for Twin cam conversion
sikyne Fuel Injection 2008/1/8 0:48 Tell a friend
3622 16 0.00 (0 votes)
|
| 1000 - sigma disk brake upgrade
LAGWAGON LAGWAGON 2008/1/7 10:52 Tell a friend
2794 2 0.00 (0 votes)
| 1200 coupe hub on sigma disk. |
|
| my 1000 disk brake upgrade
LAGWAGON LAGWAGON 2008/1/7 10:51 Tell a friend
5051 9 0.00 (0 votes)
| having a go at the sigma caliper and disk upgrade pioneered by D. 1200 coupe hub, sigma disk and caliper and bracket, with all the holes in the bracket welded up and new holes drilled to suit the 1000. mild machining on the disk so the hub fits up and thats it! still not on the car but getting close... |
|
| Red Grandpa
Freak Freak 2008/1/7 9:49 Tell a friend
2821 11 0.00 (0 votes)
| Can just see the new pipe tucked away. |
|
| Engine bay panited..
FRKYCA Misc 2008/1/7 6:11 Tell a friend
2271 8 0.00 (0 votes)
Painted the engine bay over the weekend.Its Turismo Mica (MONARO)
but as a solid... |
|
| DATSMAD
Lachie Misc 2008/1/7 5:46 Tell a friend
2460 9 0.00 (0 votes)
|
| OFJ020
Lachie Misc 2008/1/7 0:13 Tell a friend
1755 2 0.00 (0 votes)
|
| OFJ020
Lachie Misc 2008/1/7 0:12 Tell a friend
2122 6  4.00 (1 vote)
|
| Blue SR20 1200 Ute
Lachie Misc 2008/1/7 0:11 Tell a friend
1525 1 0.00 (0 votes)
| Blue SR20 1200 Ute at Summernats |
|
| DATSMAD
Lachie Misc 2008/1/7 0:11 Tell a friend
2569 11 0.00 (0 votes)
|
| MAD60Y
Lachie Misc 2008/1/7 0:09 Tell a friend
1612 1 0.00 (0 votes)
|
| MYDRUG
Lachie Misc 2008/1/7 0:09 Tell a friend
1643 1 0.00 (0 votes)
|
| 2 datsun 240k gl 1974
ovenfood Misc 2008/1/6 21:24 Tell a friend
4546 6 0.00 (0 votes)
| i got this of an old relitive its sweet almost perfect just a lil paint here lil screwdiver there and what u know as new all oringinal parts and al :> |
|
| What a view
beattie Misc 2008/1/6 11:04 Tell a friend
1951 6 0.00 (0 votes)
| Took a few happy snaps as you do when i pre ran the A-Series cruise. This is overlooking Bells Rapids in Brigadoon WA. |
|
| laneys toy
Laney Members 2008/1/6 10:46 Tell a friend
2181 12 0.00 (0 votes)
|
| laneys toy again
Laney Members 2008/1/6 10:44 Tell a friend
1848 3 0.00 (0 votes)
|
| laneys dat back working on it again
Laney Members 2008/1/6 10:43 Tell a friend
2049 1 0.00 (0 votes)
|
| 12" Low Profile Tires - Yokohama A048R
ddgonzal ddgonzal 2008/1/6 9:41 Tell a friend
21246 15 0.00 (0 votes)
get rid of those tall 12" tires
These are extra-low-profile 165/55-R12 |
|
