NISSAN COMPETITION PARTS

Proven names like Electromotive, Bob Sharp Racing, Tilton, Koni, Venolia and Iskenderian, backed by a complete line of non-USA [JDM] and competition parts from the factory make this the most comprehensive competition catalog ever.

• page  2     240Z, 260Z, 280Z, 280ZX
• page 16     510, 610, 710, 200SX, Stanza
• page 34     #1200, B210, 210, 310/N10
              [sic, page 36]
• page 48     620, 720 Truck
• page 54     1600, 2000 Roadster
• page 60     #Miscellaneous

• Cylinder Blocks
• Crankshafts
• Connecting Rods
• Connecting Rod Bearings (A-Series)
• Main Bearing (#1/#5, Shell Thickness)
• Main Bearing (#2/#4, Shell Thickness)
• Main Bearing (Center, Shell Thickness)
• A12/A13 Factory Cast Flat-Top Pistons

• Arias Forged Racing Pistons
• Cosworth Forged Racing Pistons
• Camshafts & Related Components (A-series)

• Cylinder Heads & Components
• Valves (A-series)
• Lubrication (A-series)
  • Competition Oil Pump

• Lubrication [continued]
  • Oil Cooler Assembly
  • Competition Oil Pan
    • Adapter/Oil Temp Sending Unit

• Cooling (A-series)
  • Radiator
  • Fan Shroud
  • B210 [High RPM] W/P & Fan Assy

• GX/SU INDUCTION SYSTEM

The GX/SU induction system was a production line option on non-USA versions of the 1200 and B210. Requires use of GX cylinder head. The GX system can be adapted to virtually any A-series engine.

• 40MM MIKUNI/SOLEX INDUCTION SYSTEM
• 44MM MIKUNI/SOLEX INDUCTION SYSTEM

This induction system requires the use of the GX or competition cylinder head. With appropriate jetting and venturi sizing this system can be applied to any modified A-series engine.

• Electric fuel pump
• replacement filter
• blanking plate

• Pulleys (A-series)
• Electrical System (A-series)
  • GX DISTRIBUTOR
  • SOLID PLATE W/POINT SET
  • COMPETITION DISTRIBUTOR
  • MALLORY TACH-DRIVE RACING DISTRIBUTOR
  • COMPETITION PLUG WIRE SET
  • CRANKFIRE IGNITION SYSTEM
  • 1200 HEAVY-DUTY STARTER
  • B210/210 GEAR-REDUCTION STARTER
  • B210 HD 50A ALTERNATOR (TO 8/74
  • 1200 HIGH-SPEED WIPER MOTOR

• Tachometer & Race Tachometer
• 1200 120mph Speedometer

  24850-H3400 Inludes tripmeter

• Exhaust system
  • 1200 GX Exhaust Manifold
  • Pipes
  • GX Exhaust flange gasket
  • Competition headers (Extractors)

• Flywheel & Clutch
• Transmissions
  • 4-speed Option 1 (middle-close) gear set
  • 4-speed Option 2 (ultra-close) gear set
  • 5-speed F5C56A
    • 5-speed mounting parts

• H145A Ring & Pinion Sets (To 8/74)
• H145A Limited-Slip Assy (To 8/74)
• H145A Differential Assy
• H145A Axles Baffles
• Differential Oil Cooler Assy
• H150 Ring & Pinion Sets

  The factory does not produce axles baffles or limited-slip units for the H150 differentials.

• H165 Conversion Listing for B110 and B210

• F10 & N10/310 Final Drive Gears (To 7/81)
• Wheel Studs & Nuts
• Brakes
  • 99996-H7010 1200, F10 & 310/N10 DP11 BRAKE PAD SET
  • 99996-K7000 B210 & 210 DP11 BRAKE PAD SET
  • 44060-27720 BRAKE SHOE/FORE for 1200 and early B210
  • 44070-27720 BRAKE SHOE AFT for 1200 and early B210
  • 44060-A1270 BRAKE SHOE/FORE for late B210, 210, F10 & 310/N10
  • 44070-A1270 BRAKE SHOE/AFT for late B210, 210, F10 & 310/N10
  • 44100-H3320 5/8" WHEEL CYLINDER for 1200 and early B210
  • 44100-H3300 11/16" WHEEL CYLINDER for 1200 and early B210
  • 44100-H3100 13/16" WHEEL CYLINDER for 1200 and early B210
  • 44100-M7000 5/8" WHEEL CYLINDER for late B210, 210, F10 & 310/N10
  • 44100-M7000 5/8" WHEEL CYLINDER for late B210, 210, F10 & 310/N10
  • 44100-M4901 11/16" WHEEL CYLINDER for late B210, 210, F10 & 310/N10
  • 44100-G2800 3/4" WHEEL CYLINDER for late B210, 210, F10 & 310/N10
  • 44100-U9200 13/16" WHEEL CYLINDER for late B210, 210, F10 & 310/N10
  • 44100-N4601 7/8" WHEEL CYLINDER for late B210, 210, F10 & 310/N10
  • 44100-Q1100 15/16" WHEEL CYLINDER for late B210, 210, F10 & 310/N10
  • 44100-A7610 1" WHEEL CYLINDER for late B210, 210, F10 & 310/N10
  • 44100-A7611 1-1/16" WHEEL CYLINDER for late B210, 210, F10 & 310/N10
• 1200 Stabilizer Bars
  • 54611-H2300 20MM FRONT BAR
  • 54617-H2300 BUSHING FOR 54611-H2300 2 REQ.
  • 99996-H4301 QUICKOR 25MM FRONT BAR KIT
  • 99996-H4351 QUICKOR 19MM REAR BAR KIT
• B210 Stabilizer Bars
  • 54611-22301 19MM FRONT BAR
  • 54617-22020 BUSHING FOR 54611-22301 2 REQ.
  • 99996-H4060 INSTALLATION KIT FOR 54611-22031
  • 54611-22030 23MM FRONT BAR
  • 54617-22030 BUSHING FOR 54611-22030 2 REQ.
  • 99996-H4060 INSTALLATION KIT FOR 54611-22030
• 210 [Datsun B310] Stabilizer Bars
• 310/N10 Stabilizer Bars
• Koni Shock Absorbers
  • Front
  • Rear
  • 99996-1714N 1200/FRONT 2 REQ.
  • 99996-2359A 1200/REAR (COUPE ONLY) 2 REQ.
  • 99996-1912R B210/FRONT
  • 99996-2359A B210/REAR (COUPE ONLY)
  • 99996-2002P 210/FRONT
  • 99996-2378B 210/REAR (EXCEPT WAGON)
  • 99996-1130B 210/REAR (GAS)(EXCEPT WAGON)
  • 99996-2002T 210/FRONT (SPORT)
  • 99996-2378J 210/REAR (SPORT)(EXCEPT WAGON)
  • 99996-2005P F10 & 310/N10/FRONT
  • 99996-2205B F10 & 310/N10/REAR

• 1200 Coupe Racing Suspension System
• B210 Coupe Racing Suspension System
• 210 Racing Suspension System
• 210 Misc. Suspension Components
• 310/N10 Coupe Racing Suspension System
• 1200 Coupe Factory Fiberglass Parts

• B210 GT4 Fiberglass Parts
• 210 Fiberglass Parts

• Mikuni/Solex Accessories
  • Main Jets
  • Air Jets (Countersunk Type)
  • Pilot Jets
  • Outer Venturi (40PHH)
  • Outer Venturi (44PHH)
  • Needle Valve ASSY
  • Velocity Stack

• Mikuni/Solex Accessories [continued]
  • Jet Blocks
  • Main Bleed Pipe (Emulsion Tube)

• Champion Spark Plugs
  • [various standard tip, gold tip or projected tip plugs]
• Spark Plug Spacer
  • 99996-N6732 .096 SPARK PLUG SPACER
  • 99996-0N677 .135 SPARK PLUG SPACER

• Special Tools
  • EG167-00000 UNI-SYN CARB ADJUSTMENT GAUGE
  • ST358-50000 BRAKE ADJUSTMENT TOOL

• 99996-CAT84 1984 COMPETITION CATALOG
• 99996-H8010 1200 SUSPENSION MODIFICATION MANUAL
• 99996-M8031 PARTS SCHEMATIC CATALOG

• Nissan/Datsun Die-cuts & Labels
  • 99996-X1001 'DATSUN' BLACK (1.5" x 12")
  • 99996-X1002 'DATSUN' WHITE (1.5" x 12")
  • 99996-X1003 'NISSAN' BLACK (1.5" x 12")
  • 99996-X1004 'NISSAN' WHITE (1.5" x 12")
  • 99996-X1010 'DATSUN' BLACK (3.5" x 34")
  • 99996-X1011 'DATSUN' WHITE (3.5" x 34")
  • 99996-X1013 'NISSAN' BLACK (3.5" x 34")
  • 99996-X1014 'NISSAN' WHITE (3.5" x 34")
  • 99996-X2001 'DATSUN...WE ARE DRIVEN' BLACK
  • 99996-X2002 'DATSUN...WE ARE DRIVEN' WHITE
  • 25371-N3121 IGNITION CUT-OFF SWITCH LABEL (CIRCLE)
  • 25371-A7600 IGNITION CUT-OFF SWITCH LABEL (TRIANGLE)