| my dads 1200
 racingboricua  Misc  2005/12/31 2:19  Tell a friend
 2282  0  0.00 (0 votes)
we started this car about a year ago we were going to do the pain job and a rotary convertion
then the paint... this is the color of my 1200 were going to make them identiocal twins atlest from the outside.... were trying to confuse ppl when we drive them |
|
| my dads 1200
racingboricua Misc 2005/12/31 2:15 Tell a friend
2134 0 0.00 (0 votes)
we started this car about a year ago we were going to do the pain job and a rotary convertion
then the paint |
|
| my dads 1200
racingboricua Misc 2005/12/31 2:12 Tell a friend
2172 0 0.00 (0 votes)
we started this car about a year ago we were going to do the pain job and a rotary convertion
this is how it looked afterword |
|
| my dads 1200
racingboricua Misc 2005/12/31 2:08 Tell a friend
2128 0 0.00 (0 votes)
we started this car about a year ago we were going to do the pain job and a rotary convertion
this is the monting plate |
|
| my dads 1200
racingboricua Misc 2005/12/31 2:03 Tell a friend
1913 0 0.00 (0 votes)
| we started this car about a year ago we were going to do the pain job and a rotary convertion |
|
| Supercharged Ute
Freak Misc 2005/12/31 0:45 Tell a friend
3097 13 0.00 (0 votes)
| Blown ute. Looks awesome. Any info? |
|
| 40rst's stanza
40RST Misc 2005/12/30 13:30 Tell a friend
2874 0 0.00 (0 votes)
My old car, now long gone to another home...
hope its still going? |
|
| my coupe
40RST Misc 2005/12/30 13:28 Tell a friend
2453 5 0.00 (0 votes)
|
| one day at home
racingboricua Misc 2005/12/30 9:49 Tell a friend
2364 7 0.00 (0 votes)
this is a picture of all are running cars
ps the light are ther only becus the preson how sold it to my freind did it and he cut the panel so we can not put it bak the way it should be with out damiging the paint jod plus the owner "likes it" becus its difrent. I persoly hat it i think it looks like crap |
|
| le coquis back end
racingboricua Body and Interiors 2005/12/30 8:04 Tell a friend
2889 0 0.00 (0 votes)
| this is wats ceping us from finish the body work were trying to get the entier panel but no one has it |
|
| this is el coqui
racingboricua Misc 2005/12/30 8:01 Tell a friend
1952 0 0.00 (0 votes)
| my first car. i have had this for 5 years we did all the work on this car. were trying to get it panted |
|
| orang cruch's hart
racingboricua Engine 2005/12/30 7:56 Tell a friend
3081 0 0.00 (0 votes)
| we did all the work are selfs |
|
| washing orang crush
racingboricua Misc 2005/12/30 7:38 Tell a friend
2162 1 0.00 (0 votes)
|
| emblem
pager Misc 2005/12/30 6:08 Tell a friend
2168 0 0.00 (0 votes)
|
| Traffic In Thailand
matbighat Misc 2005/12/30 5:22 Tell a friend
2185 4 0.00 (0 votes)
|
| engine bay
disndat Misc 2005/12/29 10:38 Tell a friend
2242 5 0.00 (0 votes)
| new updated shots of the engine bay of a 1200 sedan from project mayhem! |
|
| Front end
disndat Misc 2005/12/29 10:31 Tell a friend
1869 0 0.00 (0 votes)
|
| Early Prototype Rotary 1200
TnPshow TnPshow 2005/12/28 23:58 Tell a friend
8672 22  10.00 (2 votes)
| At a Tokyo car show, during the 'rotor madness' years, a Nissan prototype 1200 sporting a 10A Hiroshima Screamer |
|
| Datsun ute Micro Machines 2
TnPshow TnPshow 2005/12/28 23:57 Tell a friend
2813 2 0.00 (0 votes)
|
| Datsun ute Micro Machines 1
TnPshow TnPshow 2005/12/28 23:56 Tell a friend
2582 1 0.00 (0 votes)
| I found 'em the other day... |
|
| AIR Drag Meet 2002, actually
TnPshow TnPshow 2005/12/28 23:54 Tell a friend
3687 1 10.00 (2 votes)
| 4 and Rotary Nationals at adelaide International Raceway |
|
| AIR Drag Meet 2001(?)
TnPshow TnPshow 2005/12/28 23:53 Tell a friend
4051 10  9.00 (2 votes)
| Adrian Wood's 1200 Ute powered by a 2lt Ford motor (never went as hard as his escort, though...) |
|
| 1200 ute aircon
TnPshow TnPshow 2005/12/28 23:52 Tell a friend
4807 9 0.00 (0 votes)
|
| Daily driver (soon to be)
TnPshow TnPshow 2005/12/28 23:51 Tell a friend
1933 0 0.00 (0 votes)
|
| badge
DattoChrisUte Forum 2005/12/28 22:28 Tell a friend
2118 1 0.00 (0 votes)
| I brought one of these badges at a swap meet a few months back . i tryin to find out what year datsun this badge is from? |
|
| Brand new alloy rocker cover 3/4 view
sidedraught sidedraught 2005/12/28 21:25 Tell a friend
2999 9 0.00 (0 votes)
| Money seems to be no object to the people buying these things |
|
| left side of w50
Wogboy Wogboy 2005/12/28 19:30 Tell a friend
2793 0 0.00 (0 votes)
| left side of w50 in the tunnell |
|
| intercooler pipe work
Wogboy Wogboy 2005/12/28 19:29 Tell a friend
2711 0 0.00 (0 votes)
| this is from the turbo to the cooler, it was my first attempt using a tig |
|
| r31 skyline diff caliper
Wogboy Wogboy 2005/12/28 19:28 Tell a friend
4042 6 0.00 (0 votes)
|
| right side of w50
Wogboy Wogboy 2005/12/28 19:28 Tell a friend
2683 0 0.00 (0 votes)
| right side of w50 in the tunnell |
|
| under side of caliper
Wogboy Wogboy 2005/12/28 19:27 Tell a friend
2677 0 0.00 (0 votes)
| under side of the r31 rear caliper |
|
| top raditor pannell
Wogboy Wogboy 2005/12/28 19:27 Tell a friend
2616 5  8.00 (1 vote)
| got it pressed up out of 1.6 ss and I did the rest |
|
| left side of raditor
Wogboy Wogboy 2005/12/28 19:25 Tell a friend
2267 5 0.00 (0 votes)
| can't realy see but I've left enough room to mount an aircon condensor |
|
| SS exhaust system
Wogboy Wogboy 2005/12/28 19:25 Tell a friend
2132 3 0.00 (0 votes)
| 3" dump pipe through a 3" cat reduced to 2.5" out to the mufler |
|
| Brake upgrade
Wogboy Wogboy 2005/12/28 19:24 Tell a friend
2439 3 0.00 (0 votes)
| Heres a pick of my front brakes |
|
| custom inlet manifold
Wogboy Wogboy 2005/12/28 19:23 Tell a friend
2326 10 0.00 (0 votes)
| the inlet manifold I made |
|
| momo accesories for the ute
Wogboy Wogboy 2005/12/28 19:23 Tell a friend
2505 7 0.00 (0 votes)
| momo pedal kit ,hand brake cover, & gear knob |
|
| lowered
Wogboy Wogboy 2005/12/28 19:22 Tell a friend
2946 14 0.00 (0 votes)
| still trying to get the right ride height |
|
| Left side 1200 ute
Wogboy Wogboy 2005/12/28 19:21 Tell a friend
2511 4 0.00 (0 votes)
| just another pick of my ute |
|
| r31 skyline diff caliper.
Wogboy Wogboy 2005/12/28 19:21 Tell a friend
2138 0 0.00 (0 votes)
| another pick different angle |
|
| rear wheel
Wogboy Wogboy 2005/12/28 19:20 Tell a friend
2008 0 0.00 (0 votes)
| ride height on rear left wheel |
|
| WRX seats
Wogboy Wogboy 2005/12/28 19:20 Tell a friend
2927 10 0.00 (0 votes)
| I've just mounted a pair of wrx seats in the 1200 |
|
| w50 celica box
Wogboy Wogboy 2005/12/28 19:19 Tell a friend
2277 1 0.00 (0 votes)
| the w50 celica box just fitted in the tunnell |
|
| w50 adaptor plate
Wogboy Wogboy 2005/12/28 19:19 Tell a friend
2412 1 0.00 (0 votes)
| 12mm w50 celica adaptor plate with a 4agze starter motor |
|
| Carbon fiber mirror on my dat
Wogboy Wogboy 2005/12/28 19:18 Tell a friend
2460 0 0.00 (0 votes)
| I thought I'de give these a go |
|
| dump pipe
Wogboy Wogboy 2005/12/28 19:18 Tell a friend
2345 7 0.00 (0 votes)
| took about 1 hr to make the bend and about 20min to tig it up |
|
| caltrack traction system rear
Wogboy Wogboy 2005/12/28 19:17 Tell a friend
3067 4 0.00 (0 votes)
| rear mounting point, I'm still mounting the diff thats why everything is still loose |
|
| caltrack traction system
Wogboy Wogboy 2005/12/28 19:16 Tell a friend
2695 0 0.00 (0 votes)
|
| intercooler pipe work
Wogboy Wogboy 2005/12/28 19:16 Tell a friend
2595 8 0.00 (0 votes)
| this is the pipe that goes from the intercooler to the plenum |
|
| fuel reg
Wogboy Wogboy 2005/12/28 19:16 Tell a friend
2015 0 0.00 (0 votes)
| malpassi rising rate fuel regulator |
|
| R31 rear brakes
Wogboy Wogboy 2005/12/28 19:15 Tell a friend
2960 9 0.00 (0 votes)
| R31 skyline diff in 1200 ute |
|
| turbo gt 28rs bb turbo
Wogboy Wogboy 2005/12/28 19:14 Tell a friend
2107 0 0.00 (0 votes)
| garrett turbo in my datto |
|
| My 1200 ute at the painters
Wogboy Wogboy 2005/12/28 19:14 Tell a friend
2927 2 0.00 (0 votes)
| This is the only pick I have so far |
|
| braded hoses
Wogboy Wogboy 2005/12/28 19:13 Tell a friend
2154 3 0.00 (0 votes)
|
| eng mount
Wogboy Wogboy 2005/12/28 19:13 Tell a friend
1973 1 0.00 (0 votes)
|
| bottom raditor mounting pannell
Wogboy Wogboy 2005/12/28 19:12 Tell a friend
2174 3 0.00 (0 votes)
| it bolts in with 4 m6 bolts so that it's easy to remove the motor |
|
| engine mount
Wogboy Wogboy 2005/12/28 19:12 Tell a friend
2031 3 0.00 (0 votes)
|
| top of w50
Wogboy Wogboy 2005/12/28 19:11 Tell a friend
2115 0 0.00 (0 votes)
| top of w50 still have to make the cover plate |
|
| w50 Xmember
Wogboy Wogboy 2005/12/28 19:11 Tell a friend
2265 6 0.00 (0 votes)
|
| bonnet vents
Wogboy Wogboy 2005/12/28 19:10 Tell a friend
2693 7 0.00 (0 votes)
| Ford EB XR8 moffat bonnet vents |
|
| another braded hose
Wogboy Wogboy 2005/12/28 19:09 Tell a friend
2076 4 0.00 (0 votes)
| these things cost a fortune but there good |
|
| another braded hose
Wogboy Wogboy 2005/12/28 19:09 Tell a friend
2049 0 0.00 (0 votes)
|
| almost complete engine bay
Wogboy Wogboy 2005/12/28 19:08 Tell a friend
3201 13 0.00 (0 votes)
| it's almost done in this area |
|
| adaptor plate w50, 4agte
Wogboy Wogboy 2005/12/28 19:08 Tell a friend
2295 3 0.00 (0 votes)
|
| 4agze in 1200 ute
Wogboy Wogboy 2005/12/28 19:07 Tell a friend
2774 8 0.00 (0 votes)
| just have to make the inlet and exhaust manifold |
|
| 4agte manifold
Wogboy Wogboy 2005/12/28 19:07 Tell a friend
2381 0 0.00 (0 votes)
| another pick of the manifold |
|
| 4agte manifold
Wogboy Wogboy 2005/12/28 19:07 Tell a friend
2306 1 0.00 (0 votes)
| I made this out of 1"1/4 steam pipe |
|
| 4agte in 1200 ute
Wogboy Wogboy 2005/12/28 19:06 Tell a friend
2891 5 0.00 (0 votes)
| the eng bay is almost complete |
|
| 4 puck clutch
Wogboy Wogboy 2005/12/28 19:06 Tell a friend
2038 0 0.00 (0 votes)
| 4 puck ceramic hilux clutch with a 4agze H/D pressure plate |
|
| 3" tail shaft
Wogboy Wogboy 2005/12/28 19:06 Tell a friend
2169 3 0.00 (0 votes)
| it goes from a w50 celica box to a r31 skyline diff |
|
| my rear tyers not the datto
Wogboy Wogboy 2005/12/28 19:05 Tell a friend
2074 4 0.00 (0 votes)
| this is a rear shot of my new tyers on my supra 295/30/18 Pirelly PZERO |
|
| my ute
DattoChrisUte Misc 2005/12/28 10:06 Tell a friend
2014 0 0.00 (0 votes)
| my ute, ready to go on rotisiree very soon for rust repair and custom panel work |
|
| 2 1200s
DattoChrisUte Members 2005/12/28 9:57 Tell a friend
2303 0 0.00 (0 votes)
| The two 1200s ready for resto |
|
| Eaton Supercharger
Rogue Misc 2005/12/28 8:34 Tell a friend
2388 0 0.00 (0 votes)
| This is the Merc blower that I scored off a mate |
|
| Left side 1200 ute
Wogboy Wogboy 2005/12/28 8:20 Tell a friend
3355 9 0.00 (0 votes)
| first time out of the shed |
|
| 12OOU
12OOU 12OOU 2005/12/27 23:03 Tell a friend
1998 0 0.00 (0 votes)
|
| 12OOU
12OOU 12OOU 2005/12/27 23:02 Tell a friend
2147 0 0.00 (0 votes)
|
| 12OOU
12OOU 12OOU 2005/12/27 23:02 Tell a friend
2193 0 0.00 (0 votes)
|
| 12OOU
12OOU 12OOU 2005/12/27 23:02 Tell a friend
2159 0 0.00 (0 votes)
| At workshop, new wheels :) |
|
| 12OOU
12OOU 12OOU 2005/12/27 23:02 Tell a friend
2020 0 0.00 (0 votes)
|
| 12OOU
12OOU 12OOU 2005/12/27 23:02 Tell a friend
2366 1 0.00 (0 votes)
|
| 12OOU
12OOU 12OOU 2005/12/27 23:02 Tell a friend
2296 1 0.00 (0 votes)
|
| 12OOU
12OOU 12OOU 2005/12/27 23:01 Tell a friend
2017 0 0.00 (0 votes)
| My car on a mates photo shoot. |
|
| 12OOU
12OOU 12OOU 2005/12/27 22:58 Tell a friend
2693 9 0.00 (0 votes)
|
| 12OOU
12OOU 12OOU 2005/12/27 22:57 Tell a friend
2391 0 0.00 (0 votes)
|
| photo finish
Tully Misc 2005/12/27 1:21 Tell a friend
1808 1 0.00 (0 votes)
|
| doing what is does best
Tully Misc 2005/12/27 1:19 Tell a friend
1706 0 0.00 (0 votes)
| no more to say the pic says it all |
|
| getting there
Tully Misc 2005/12/27 1:18 Tell a friend
1860 4 0.00 (0 votes)
|
| datsun wins
Tully Misc 2005/12/27 1:16 Tell a friend
1725 1 0.00 (0 votes)
| it won its class driven by ulleyett |
|
| looks good
Tully Misc 2005/12/27 1:14 Tell a friend
1794 2 0.00 (0 votes)
|
| lovin it
Tully Misc 2005/12/27 1:11 Tell a friend
1766 0 0.00 (0 votes)
|
| more side
Tully Misc 2005/12/27 1:09 Tell a friend
1759 0 0.00 (0 votes)
| dont feel bad if u cant do it |
|
| side wayz action
Tully Misc 2005/12/27 1:08 Tell a friend
2107 0 0.00 (0 votes)
| this is barbados' best geoffery ullyett |
|
| All engineered now
731200 731200 2005/12/26 1:29 Tell a friend
1785 1 0.00 (0 votes)
| had to be done for engeneering purposes |
|
| All engineered now
731200 731200 2005/12/26 1:28 Tell a friend
1708 0 0.00 (0 votes)
| had to be done for engineering purposes |
|
| All engineered now
731200 731200 2005/12/26 1:25 Tell a friend
1622 1 0.00 (0 votes)
| had to be done for engineering purposes |
|
| All engineered now
731200 731200 2005/12/26 1:23 Tell a friend
2150 13 0.00 (0 votes)
| Had to be done for engeneering purposes |
|
| 13's on my ute
BVC_Bullet Wheels 2005/12/25 23:06 Tell a friend
2594 0 0.00 (0 votes)
| These are the 13's on my 1200 ute. trying to sell them to get 15's |
|
| Flammability of Interior Materials
ddgonzal Body and Interiors 2005/12/25 17:22 Tell a friend
3029 0 0.00 (0 votes)
US law, went into effect September 1, 1972
From the 1973 Intro, Nissan North America |
|
| Brake line pressure differential Warning Light Switch
ddgonzal Tech Section 2005/12/24 18:49 Tell a friend
5590 0 0.00 (0 votes)
Datsun 1200 LHD disk brake model. From the north american factory manual.
A warning light is located on the instrument panel to warn the driver when a pressure difference of 13 to 17 kg/cm2 (185 to 242 lb/sq in) exists between the front and rear brake systems.
A hydraulically actuated warning light switch is located in the engine compartment. Both front and rear brake systems are connected to the switch assembly.
When a pressure difference of 13 to 17 kg/cm2 (185 to 242 lb/sq in) occursbetween the front and rear brake systems, the valves will shuttle toward the side with the low pressure. The valve contacts with the switch terminal, the ground circuit for the warning light is completed, and thus the warning light lights.
In this case, correct the hydraulic brake problem and bleed the brakes.
Check the warning light switch assembly for a proper operation. Check the switch assembly for luid leakage.
NOTE: Do not attempt to repair switch for any reason: replace switch assembly completely. |
|
