| H190 H165 centers
 ca18det_man  Drive Train  2004/4/24 11:04  Tell a friend
 6247  6  0.00 (0 votes)
| The H190 is alloy 4.625:1 open center :( Ill see how it goes might have to lock it. The H165 cast steel center is from a C20 Vannete 4.875:1 |
|
| H190- H165 axles
ca18det_man Drive Train 2004/4/24 11:01 Tell a friend
6315 0 0.00 (0 votes)
| A comparison between the H190 and H165 axles. Both out of datsun utes the h190 from a 620 ute the h165 from a b120 or 1200 ute. |
|
| H190- H165 comparison
ca18det_man Drive Train 2004/4/24 10:55 Tell a friend
7629 3 0.00 (0 votes)
Im going ahead with the H190 into my ca18 1200 coupe as I have not had any luck sourcing a R31 BW LSD diff to shorten 
It is 20mm wider in track 28 spline axles and weighs in at 42kg compared to 34kg H165. Im now on the look out for an LSD center. |
|
| D/Mans KB10
Dodgeman Misc 2004/4/24 10:23 Tell a friend
2552 10 0.00 (0 votes)
| I bought myself a new digital camera & this is the first picture. The rubbish on the roof will be gone in the morning. |
|
| Post fuel filler fitment
dattodevil Members 2004/4/24 9:33 Tell a friend
2671 1 0.00 (0 votes)
| Motorbike fuel filler, welded with skim coat of filler. |
|
| my new dato ute
Taylor Misc 2004/4/23 9:57 Tell a friend
3412 10  9.00 (1 vote)
| just imported it from jap. only pic i have so far |
|
| My datsun and Pit
Elbruto 1200driver 2004/4/23 1:16 Tell a friend
5392 3 0.00 (0 votes)
| This is my life time buddy.... And car. |
|
| skinny ute
Datto7 Misc 2004/4/22 6:49 Tell a friend
2229 0 0.00 (0 votes)
| I had to take this photo of how small the ute looks without front guards and a bonnet. Kinda looks out of proportion but i assure you it isn't. |
|
| Sunny 4-dr Dealer Promotion
ddgonzal Tech Section 2004/4/21 7:02 Tell a friend
3117 5 0.00 (0 votes)
| Came in a box. The top of the car can be removed, and there is a place for cigarettes. |
|
| extractors
Datto7 Misc 2004/4/21 2:14 Tell a friend
3246 14 0.00 (0 votes)
| New extractors are fitted, have to pull carby off yet and re-kit. but coudn't wait to get extractors on and hooked up. |
|
| My Datsun 1200 Coupe 2
Datto_King Forum 2004/4/21 1:51 Tell a friend
2975 6 0.00 (0 votes)
| This is my 1200 Coupe at its new home in sunny Invercargill, i've start to strip the body down for Panel Beating |
|
| My Datsun 1200 Coupe
Datto_King Forum 2004/4/21 1:22 Tell a friend
2859 2 0.00 (0 votes)
| This is my 1200 coupe at the farm in Dunedin NZ where i bought it from |
|
| dam that would hurt
NIS15L Misc 2004/4/21 0:03 Tell a friend
2636 7 0.00 (0 votes)
| turbo can be fun burt can be dangerous!!!!! |
|
| finger job
NIS15L Misc 2004/4/20 23:58 Tell a friend
4290 5 0.00 (0 votes)
| what happens when you put ur finger near a big turbo when coming on boost on the dyno |
|
| ute
Datto7 Misc 2004/4/20 23:39 Tell a friend
2359 10 0.00 (0 votes)
| My ute is finally starting to look like a ute again, painted next week hopefully!!!! |
|
| my new parts i made
_steve_ Body and Interiors 2004/4/20 10:29 Tell a friend
3179 4 0.00 (0 votes)
|
| brake booster suitable for 1200 Pt2
evilsim Brakes 2004/4/19 14:14 Tell a friend
6166 8 0.00 (0 votes)
| here is the same brakebooster from L(A or B) 1974 mitsubishi lancer - with the spacer ! also the hub for the brake lines. will update when installed. |
|
| brake booster suitable for 1200 Pt2
evilsim Brakes 2004/4/19 14:11 Tell a friend
4204 0 0.00 (0 votes)
| here is the same brakebooster with the missing spacer ! also the hub for the brake lines. will update when installed. |
|
| Mobile Phone
Dodgeman Misc 2004/4/18 13:15 Tell a friend
4252 30 0.00 (0 votes)
Just for fun. It's performance was hard to believe.
Driver "Max Speed" [Alias Dodgeman]
Crewchief "Max Power" |
|
| Chick magnet
Dodgeman Misc 2004/4/18 13:06 Tell a friend
3003 9 0.00 (0 votes)
| The girls get to ride on the bench seat / race wing at the back. [see other photo] |
|
| wrecked sunny
evilsim Misc 2004/4/18 12:58 Tell a friend
2475 3 0.00 (0 votes)
| found this pic thru google images |
|
| New Odyssey Battery
ca18det_man Body and Interiors 2004/4/18 10:53 Tell a friend
3628 7 0.00 (0 votes)
| Made up a little battery holder and welded it all in. Its a nice snug fit the batery is rated 650cca and is half the weight of my old one. |
|
| Splits
datto_ute Members 2004/4/16 22:55 Tell a friend
3069 2 0.00 (0 votes)
| Alpine splits i mounted in the kick panels....now i need to replace kicks to make it look a bit more tidy. |
|
| A15TT exhaust gasket
1200rallycar 1200rallycar 2004/4/16 8:37 Tell a friend
3141 10 0.00 (0 votes)
|
| My Datsun 120Y 1978
Andresedu Misc 2004/4/15 19:39 Tell a friend
6338 4  10.00 (1 vote)
|
| We have lift off!!
reuby_tuesday reuby_tuesday 2004/4/15 14:48 Tell a friend
2414 6 0.00 (0 votes)
|
| 1200 SSS
stirlingmac Body and Interiors 2004/4/15 11:12 Tell a friend
6436 3 10.00 (1 vote)
| Original except for the wheels. |
|
| 1200 Coupe Race Car Build Day 1
converted Track 2004/4/15 10:54 Tell a friend
2825 6 0.00 (0 votes)
| Here are some photos of the coupe completely stripped painted shell. |
|
| don't do this on a road car!
flgnowbla Misc 2004/4/15 8:47 Tell a friend
2450 2 0.00 (0 votes)
| this is "the Defect's boot restraint it is a flat bit of steel plate that bolts on where the original catch went, and a threaded rod THROUGH the bootlid, topped off with a oversize wingnut! (the "EDDIE LIVES" thing is an Iron Maiden refference) |
|
| sticker
who_your_datty_1200 Misc 2004/4/15 8:31 Tell a friend
2494 8 0.00 (0 votes)
| hmmmmmmmm I think that it looks good..... just not a good pic of it sorry |
|
| "The Defect's engine bay
flgnowbla Forum 2004/4/15 8:14 Tell a friend
3130 2 0.00 (0 votes)
| this is "The Defect"s engine, an A12 with a blown head gasket still goes well though and an auto! |
|
| cool ute
go_the_datto Body and Interiors 2004/4/15 6:32 Tell a friend
4789 3 10.00 (1 vote)
| this ute was at heathcote drags does any one have any imfo on it |
|
| cool ute
go_the_datto Body and Interiors 2004/4/15 6:30 Tell a friend
4325 5 0.00 (0 votes)
| this ute was at the heathcote drags does any one have any imfo on it |
|
| "The Defect" rear number plate
flgnowbla Misc 2004/4/15 5:12 Tell a friend
2360 0 0.00 (0 votes)
| my cousin thought of it would be suitable as I thought up the front one! |
|
| "The Defect" in all its glory
flgnowbla Misc 2004/4/15 5:06 Tell a friend
2647 4  5.50 (2 votes)
| this is "the Defect" in it's latest paint scheme I think it looks good... for a pile of crap! |
|
| "The Defect" interior 2
flgnowbla Misc 2004/4/15 4:59 Tell a friend
2284 2 0.00 (0 votes)
| heres a better idea of how much I stripped the interior out! |
|
| "The Defect"'s interior
flgnowbla Misc 2004/4/15 4:55 Tell a friend
2559 3 0.00 (0 votes)
| "The Defect" didn't look "farm hack" enough with a full interior so I stripped it out to the bare essentials! |
|
| "The Defect" front number plate
flgnowbla Misc 2004/4/15 4:46 Tell a friend
2292 0 0.00 (0 votes)
| I thought it up as I saw it on a car in Street Machine |
|
| "The Defect"
flgnowbla Misc 2004/4/15 4:43 Tell a friend
2370 0 0.00 (0 votes)
| "The Defect" is a March '77build Datsun 120Y 4 door sedan that is a lot of fun to drive |
|
| engine shot
datfunboy Misc 2004/4/15 3:05 Tell a friend
2869 5 0.00 (0 votes)
| the engine, a15 twin dellorto's mild cam custom made, headers and air box. bluey disk brake rear end, shortened stanza struts 240z inserts, modified lower control arms. adjustable front sway bar. elc fuel pump batery in boot. 200B SX rims. cobra racing seat. |
|
| Datsun E10 engine
Ironmaan Members 2004/4/14 19:32 Tell a friend
3395 9 0.00 (0 votes)
|
| Datsun E10 from side
Ironmaan Members 2004/4/14 19:31 Tell a friend
2898 0 0.00 (0 votes)
|
| Datsun E10
Ironmaan Members 2004/4/14 19:30 Tell a friend
3420 5 0.00 (0 votes)
|
| My datsun E10
Ironmaan Members 2004/4/14 19:12 Tell a friend
3827 1 0.00 (0 votes)
|
| nicks seat
1200rallycar Body and Interiors 2004/4/14 13:07 Tell a friend
3460 1 0.00 (0 votes)
| monza seat with omp harnesses, autotechnica steering wheel and a few other bits and pieces |
|
| nicks engine bay
1200rallycar Body and Interiors 2004/4/14 13:05 Tell a friend
3135 1 0.00 (0 votes)
a-14 with the seen mods and some "mystery" internal mods too
works well at the end of the day, just dunno whats making it tick |
|
| nicks cleaner pic
1200rallycar Body and Interiors 2004/4/14 13:02 Tell a friend
3242 8 0.00 (0 votes)
here we go a better side on shot
rims are exa, offset is slightly wrong and causes a little understeer but he's gonna use them until stanza struts go in |
|
| nicks supa 1200
supa1200 Body and Interiors 2004/4/14 11:09 Tell a friend
3284 7  1.00 (1 vote)
datsun 1200 coupe
a14, 32/36 webber, genie extractors
i'm in middle of building it up 4 track/rally
1200rallycar is helping me build it up! |
|
| my 1973 datsun 1200 coupe 1
_steve_ Body and Interiors 2004/4/14 11:04 Tell a friend
3153 10 0.00 (0 votes)
| i have 2 work work work work |
|
| my datsun 1200 coupe eng
_steve_ Engine 2004/4/14 11:01 Tell a friend
4038 5 0.00 (0 votes)
i have 2 work work work work
|
|
| my datsun 1200 coupe 6
_steve_ Body and Interiors 2004/4/14 10:56 Tell a friend
2628 0 0.00 (0 votes)
i have 2 work work work work
|
|
| my datsun 1200 coupe 5
_steve_ Body and Interiors 2004/4/14 10:54 Tell a friend
2781 2 0.00 (0 votes)
i have 2 work work work work
|
|
| my datsun 1200 coupe 4
_steve_ Body and Interiors 2004/4/14 10:52 Tell a friend
2993 0 0.00 (0 votes)
i have 2 work work work work
|
|
| my datsun 1200 coupe 3
_steve_ Body and Interiors 2004/4/14 10:51 Tell a friend
2697 0 0.00 (0 votes)
i have 2 work work work work
|
|
| my datsun 1200 coupe 2
_steve_ Body and Interiors 2004/4/14 10:49 Tell a friend
3063 0 0.00 (0 votes)
i have 2 work work work work
|
|
| My Daily Driver Sunny B310
Razor Members 2004/4/14 2:49 Tell a friend
4942 1 10.00 (2 votes)
1980 Sunny
just installed 32/36 weber
14" ROH rims |
|
| My Old Silvia S13
Razor Members 2004/4/14 1:53 Tell a friend
5714 3 0.00 (0 votes)
| my old 2 litre Silvia S13 |
|
| My 240K or Skyline C110
Razor Members 2004/4/14 1:41 Tell a friend
27019 29 8.50 (4 votes)
| rear shot with new rear panel and GTR lights |
|
| my motor
Ch-to-the-arlie Misc 2004/4/14 0:33 Tell a friend
2767 0 0.00 (0 votes)
| twin 40 dhla dellortos, a15 head, planed, lightened flywheel, extractors, 2" zorst mild cam... |
|
| My Datto 1200 4dr sedan... 72
Ch-to-the-arlie Misc 2004/4/14 0:27 Tell a friend
2167 4 0.00 (0 votes)
|
| engine bay
Datto7 Misc 2004/4/14 0:20 Tell a friend
2248 6 0.00 (0 votes)
| another progress piccy of my ute. Engine and interior goes back in on the weekend so all the panels can go back on and it'll be taken to a booth to paint. |
|
| my 1200 pt7 back on
agr012 Misc 2004/4/13 13:25 Tell a friend
2341 2 0.00 (0 votes)
| i think this will be my last pic i will submit 4 now ;) |
|
| my 1200 pt6?
agr012 Misc 2004/4/13 13:21 Tell a friend
2198 0 0.00 (0 votes)
| this is where she was painted |
|
| my 1200 pt5 sparco aviation filler
agr012 Misc 2004/4/13 13:18 Tell a friend
2366 0 0.00 (0 votes)
|
| my 1200 pt4 rear
agr012 Misc 2004/4/13 13:14 Tell a friend
2213 1 0.00 (0 votes)
|
| my 1200 pt3 a15
agr012 Misc 2004/4/13 13:11 Tell a friend
2236 0 0.00 (0 votes)
|
| my 1200 pt,2
agr012 Misc 2004/4/13 13:05 Tell a friend
2019 0 0.00 (0 votes)
| here is another pic of my car from another angle |
|
| my 1200
agr012 Classifieds 2004/4/13 13:00 Tell a friend
2973 7 0.00 (0 votes)
| hi this is my datto 1200 , i am thinking of selling it, it has a recent bare metal respray, with sparco fuell filler, sparco racing seats, harnesses, worked a15 with twin deloughtoes, it is manuel but has a auto transtunnel (no clearance probs), new carpet, guages etc, more spares than i could mention (sets of mags, panels, engine etc) exellent suspension (whiteline swaybars, custom adjustable struts ($1500 on there own),extra leaves etc),this car has eaten alot of my money, top quality alarm with pager, clarion cd, alpine speakers, to part with this car i will need around $7000, what do you guys think? |
|
| cappuccino pic
nys Classifieds 2004/4/13 10:16 Tell a friend
2682 1 0.00 (0 votes)
|
| Battle of the Titans!
Lobster Meetings 2004/4/12 13:56 Tell a friend
4630 6  6.50 (2 votes)
| Despite what some sources may say... This did not turn me on... |
|
| The Rigolis
Lobster Meetings 2004/4/12 13:49 Tell a friend
4767 1 0.00 (0 votes)
| Might have heard of these guys before... |
|
| Mr Heli
Lobster Meetings 2004/4/12 13:46 Tell a friend
4648 2 0.00 (0 votes)
| Not all too pretty. But that thing went... |
|
| Nother 13B 1200
Lobster Meetings 2004/4/12 13:42 Tell a friend
5648 4  8.00 (1 vote)
| From WSID Sydney Jamboree |
|
| Avenge
Lobster Meetings 2004/4/12 13:38 Tell a friend
5377 3 0.00 (0 votes)
|
| Car for sale.
Lobster Meetings 2004/4/12 13:35 Tell a friend
7083 5 10.00 (1 vote)
Was at Sydney jamboree.
Didn't have a price...
|
|
| Coupe in the parking lot of WSID
Lobster Meetings 2004/4/12 13:30 Tell a friend
4711 3 0.00 (0 votes)
|
| My wife's shopping trolley
Dodgeman Post-Rustoration 2004/4/11 16:23 Tell a friend
2734 7 0.00 (0 votes)
| The colour is from one of the Audi models. She liked it, & it went with the seats, |
|
| beware : old people shouldnt drive : get a towbar
evilsim Body and Interiors 2004/4/11 14:27 Tell a friend
3927 9 0.00 (0 votes)
i was in the datsun, waiting patiently in traffic, then i noticed thru rearview someone in their car a few cars back was not stopping. then along came the smash! smash! smash! a few cars all sandwiched together and mine was in the middle. it was an old feller down on holidays from QLD who hadnt noticed the stopped traffic and slammed into the back of the daihatsu in the photo above (whitecar) which inturn plowed into my car then i just hit the person infront.. luckily i'd noticed the oncoming idiot and used the brake to stop my car from slamming the commodore infront of me. (notshown above). the daihatsu was a writeoff which was cool since my towbar had been almost the sole reason it was left in that condition. it took so much force and was left bent like a biharch but it saved my datto.
so so so lucky the datsun was not smashed more. insurance will hopefully give me new front/rear bumper, new towbar, hopefully new front panels and new grill and some body work at the back above the bumper and she should be back better than before. no lights broken although i was very lucky there too. also almost smashed up the electrican fan for the radiator but somehow my 14" wheels held on for their lives and stopped further frontal damage.
i advise against anyone driving the roads of sydney in a datsun. if you do, travel equipped with a big freakin towbar. |
|
| Two '68's
Dodgeman Post-Rustoration 2004/4/11 12:13 Tell a friend
2357 1 0.00 (0 votes)
| The green machine is my wife's two door DeLuxe shopping trolley, while the white one is my standard four door. The 4 door's wheels were soon to be replaced by mags & the 1200GX engine is already in it. |
|
| Bonnet repairs
Dodgeman Misc 2004/4/11 11:55 Tell a friend
2438 7 0.00 (0 votes)
| I was heading for Brisbane & it was late Monday morning on the 7th of December 1981 A crack had developed around the hood / bonnet latch, so i stopped in Tamworth at a panel shop to get it fixed. Taking it off took only a few minutes, but it took them 2 hours to weld a 3" crack. I got bored, & you get inflicted with a picture |
|
| Getting Paint
Dodgeman Misc 2004/4/11 11:27 Tell a friend
2174 3 0.00 (0 votes)
| There's 1 new door, 1 new boot lid, & 2 new fenders on this one, plus ALL new rubbers & a fresh 1200 engine. |
|
| Interior shot
Dodgeman Post-Rustoration 2004/4/11 11:17 Tell a friend
2372 0 0.00 (0 votes)
| It didn't come up too bad for a scrubber. The choke knob is just for looks as the electric choke carb from a later model works perfectly. It ran as sweet as any Datsun could. |
|
| the side shot of the sedan
datfunboy Misc 2004/4/11 10:54 Tell a friend
2691 4 0.00 (0 votes)
| the wheels are off 200B SX, they are 14x6 and are running 195 60 14. |
|
| the sedan
datfunboy Misc 2004/4/11 10:21 Tell a friend
2427 11 0.00 (0 votes)
|
| the carbys that i wanna fit
reuby_tuesday reuby_tuesday 2004/4/10 12:22 Tell a friend
1912 0 0.00 (0 votes)
sidedraft su, hitachi i think
sorry about the crappy shot, have to use a cheap camera and scan in... |
|
| front of my car at the moment.
reuby_tuesday reuby_tuesday 2004/4/10 12:19 Tell a friend
2038 5 0.00 (0 votes)
| not much to look at, but at least its getting there |
|
| The side of my car at the moment...
reuby_tuesday reuby_tuesday 2004/4/10 12:18 Tell a friend
1675 0 0.00 (0 votes)
| Yeah its in bits and its getting there. |
|
| My big crank...
reuby_tuesday reuby_tuesday 2004/4/10 12:13 Tell a friend
2456 9 0.00 (0 votes)
| got this for a letter box, now I just need something to put the mail in.. |
|
| 1972 Coupe Fuel Tank
ddgonzal Forum 2004/4/10 7:13 Tell a friend
5204 6 0.00 (0 votes)
| Note the single vent hose system (plus filler hose and fuel supply line). This seems less comprehensive than the sedan or van system. |
|
| 1972 Van (Wagon) Fuel Tank
ddgonzal Forum 2004/4/10 7:12 Tell a friend
4274 0 0.00 (0 votes)
| Note the two vent hose systems (plus filler hose and fuel supply line). Also note that one of them loops up above the fuel entry level and vents down and outside the car (overflow loop). |
|
| 1972 Sedan Fuel Tank
ddgonzal Forum 2004/4/10 7:06 Tell a friend
7407 2 0.00 (0 votes)
| Note the two vent hose systems (plus filler hose and fuel supply line). Also note that one of them loops up high (#14) and vents outside the car (overflow loop). |
|
| cannon
NIS15L Misc 2004/4/10 2:07 Tell a friend
2403 2 0.00 (0 votes)
|
| excaust and cannon
NIS15L Misc 2004/4/10 2:05 Tell a friend
2265 0 0.00 (0 votes)
| stainless steel 2 inches very happy with the work |
|
| dizzy slot interference
ddgonzal Tech Section 2004/4/9 3:46 Tell a friend
3579 2 0.00 (0 votes)
| The stock 1200 distributor bracket doesn't quite fit the newer B310 Electronic Distributor (Mitsubishi) |
|
| dizzy plate comparo
ddgonzal Tech Section 2004/4/9 3:42 Tell a friend
2751 0 0.00 (0 votes)
| B310 Electronic Distributor (Mitsubishi, right) vs stock 1200 (left) |
|
| modded plate on dizzy body
ddgonzal Tech Section 2004/4/9 3:39 Tell a friend
2733 1 0.00 (0 votes)
| A12 distributor plate on B310 Electronic Distributor (Mitsubishi). This one's cut in the wrong spot. |
|
| Block where distributor fits
ddgonzal Tech Section 2004/4/9 3:35 Tell a friend
3134 0 0.00 (0 votes)
|
| dizzy body comparo
ddgonzal Tech Section 2004/4/9 3:34 Tell a friend
2927 0 0.00 (0 votes)
| B310 Electronic Distributor (Mitsubishi, right) vs stock 1200 distributor (left) |
|
| B310 Electronic Distributor installed
ddgonzal Tech Section 2004/4/9 3:32 Tell a friend
6482 3 0.00 (0 votes)
|
| Datsun 610 w/L20B
jaimecidpedro Misc 2004/4/8 4:35 Tell a friend
4476 4 0.00 (0 votes)
| Lots of power. Soon lowered(coil overs front, lower rear springs). Contrary to the B210's case, american version 180B came with rear aprons, in spite of having the same hughe "park bench" style bumpers. This apron covers the rear, while in the B210(120Y) american sold situation, there is an empty space. |
|
