| my master (modded) against stock sylvia one
 Mr_Turbo  Misc  2005/4/27 10:58  Tell a friend
 1982  4  0.00 (0 votes)
| gotta copy that bottom pushrod to the top one, can i just unbolt the bottom one and put it in the top one? |
|
| Work Ute Not Bad Hey?
datto1200ute_qld Misc 2005/4/27 10:55 Tell a friend
4194 18 0.00 (0 votes)
| Almost finished. Just waiting for my new superlites to turn up. Will post pics with some detail soon |
|
| 1000 sport sedan
vixen Misc 2005/4/26 13:04 Tell a friend
3515 8 0.00 (0 votes)
| ROB souters very quick 1000 sport sedan at hume weir back in the 70s.this car had a factory L16 which was 1780cc,it came with aFIA head,hepolite piston.steel crank and rods. |
|
| 1000 sports sedan
vixen Misc 2005/4/26 12:09 Tell a friend
2139 0 0.00 (0 votes)
| same car different colour |
|
| 1000 sport sedan
vixen Misc 2005/4/26 12:06 Tell a friend
1964 0 0.00 (0 votes)
| arriving at hume weir back the late 1970s |
|
| Bearing specs, tightening torques & mics. components
datrat_dave Misc 2005/4/26 11:01 Tell a friend
2000 0 0.00 (0 votes)
This is page has all the torque ratings which i reckons pretty useful as they are scattered all over the show in this manual...
Well thats most of all the specs on the A14 & A12 but there is about 30 pages on dissassembly & reassembly but most of its strait forward, if you need anything else just contact me!!
Dave |
|
| Piston stuff, Connecting rod spec & Crankshaft Specs
datrat_dave Misc 2005/4/26 10:22 Tell a friend
1798 0 0.00 (0 votes)
I dont get how it says that the standard oil ring is combined??
Good drawings i say! |
|
| Cam specs, valve timing & cylinder stuff...
datrat_dave Misc 2005/4/26 10:13 Tell a friend
3804 0 0.00 (0 votes)
| Its becoming more useful dont worry! |
|
| Camshaft journal & bearing specs (underside)
datrat_dave Misc 2005/4/26 10:09 Tell a friend
2004 0 0.00 (0 votes)
I told you this book has everyting!!!
Oh there was a huuge page on the valve seat (intake n exhaust) size so i didnt think was relevant, if you want it i can post!
Should i have put this stuff somewhere other than misc. folder? Kind of historic huh! |
|
| Valve rocker arm & shaft, V lifter & push rod & camshaft journals & bearing specs (stnd)
datrat_dave Misc 2005/4/26 10:02 Tell a friend
1933 0 0.00 (0 votes)
Tell me if this stuff is becoming more and more usless!! As you told me the A14 is for race specs its kinda usless me posting standard info but oh well better to be safe than sorry!!
Anyway its a good talking point :P |
|
| Valve, Valve Spring & Valve guide specs
datrat_dave Misc 2005/4/26 9:55 Tell a friend
2827 0 0.00 (0 votes)
| Again fuzzy but my scanner sux and having to make all photos below 1mb is hard... |
|
| Engine Components (from manual)
datrat_dave Misc 2005/4/26 9:43 Tell a friend
3278 4 0.00 (0 votes)
att. for LAGWAGON
Here you go Leigh theres some more coming but heres the low down on the A14 specs...
Cyln arragnment: 4, inline
Displacement cm^3 (cu in): 1,397 (85.24)
Bore X stroke mm (in): 76.0 x 77.0 (2.992 x 3.031)
valve arrngment: O.H.V
firing order: 1-3-4-2
no. of rings: compression - 2
oil - 1
no. main bearings: 5
Head surface flatness mm (in): min - less than 0.05 (0.0020) max - 0.1 (0.0040)
This info is talking about FACTORY specs but its the same idea, if you get me.....
Sorry bout the dodge quality! |
|
| mats 120y at Mt cotton
steveo steveo 2005/4/26 7:37 Tell a friend
3228 0 0.00 (0 votes)
|
| General Bearing all
General Members 2005/4/26 7:13 Tell a friend
2547 4 0.00 (0 votes)
| Heres a pic with out the head. here you could see my nice shinny pistons and my y fitting for my brakes, until i get another master cylinder |
|
| General Lee Engine
General Members 2005/4/26 7:09 Tell a friend
2460 0 0.00 (0 votes)
|
| another View
General Members 2005/4/26 6:51 Tell a friend
2495 0 0.00 (0 votes)
|
| 210 General Lee
General Members 2005/4/26 6:32 Tell a friend
4277 3 0.00 (0 votes)
|
| 1200 sedan for sale
DVLDAT DVLDAT 2005/4/26 2:11 Tell a friend
3141 1 0.00 (0 votes)
unfinished project can no longer store, no room
pm me for more details goin very cheap!
|
|
| sedan for sale
DVLDAT DVLDAT 2005/4/26 2:08 Tell a friend
2974 0 0.00 (0 votes)
|
| sedan for sale
DVLDAT Misc 2005/4/26 2:07 Tell a friend
1892 0 0.00 (0 votes)
|
| Updated rear shot
dazzasute Misc 2005/4/25 16:14 Tell a friend
2010 7 0.00 (0 votes)
| Freshly polished, and a new sticker! |
|
| how not to take a corner
vixen Track 2005/4/25 14:32 Tell a friend
3106 1 0.00 (0 votes)
| this is what happens when you put control slicks on and forget that the car will actualy turn the corner.MATTS 120y at MT cotton 05/12/04.. new car nearly ready |
|
| engine bay
General Misc 2005/4/25 7:02 Tell a friend
2042 4 0.00 (0 votes)
|
| GENERAL LEE
General Members 2005/4/25 6:49 Tell a friend
3627 14 0.00 (0 votes)
A-15 .080 over
11:1 compression
279 duration cam (232@.050) and .460" lift
The cam is installed straight up and is ground on a 106 intake centerline with a 108 lobe center
ported/polished A-15 head
oversize valves (40mm intake and 32mm ex)
Nismo Header
MSN 6A Ignition Box
Elec. Ignition
Redline Intake with a couple 40 mm DCOEs
30 venturi
45F9 IDLE JET
130F11 MAINS
50 ACC JET
JE full floting forged pistons in the engine and I can provide those specs to you if I can dig up the spec sheet that came with them. The engine has ARP head and main studs along with ARP rod bolts. The engine was balanced.
Installed a tilton 10 lb aluminum flywheel with a centerforce clutch
Future plans are to install a H190 rear end with disks and 4.10 gears and possibly spooled
A nitrous fogger system. (any ideas how big i should go?)
I am in the process of in stalling coil overs all the way around 250lbs/in in the front and 175lbs/in in the rear and a new rear sway bar |
|
| Oge's rally beast
L18_B110 Rally 2005/4/25 5:39 Tell a friend
2727 0  10.00 (1 vote)
|
| Ian Ogilvie's rally car engine
L18_B110 Rally 2005/4/25 5:36 Tell a friend
4788 10 0.00 (0 votes)
| notice the shocks remote cannisters... |
|
| Ian Ogilvie's rally car strut
L18_B110 Rally 2005/4/25 5:33 Tell a friend
3521 7 0.00 (0 votes)
|
| Carb box
Nissan4Eva Misc 2005/4/25 5:02 Tell a friend
2068 3 0.00 (0 votes)
|
| A-series Headers (USA)
ddgonzal Engine 2005/4/25 5:00 Tell a friend
3673 2 0.00 (0 votes)
|
| scca GT-5 race car
ddgonzal Track 2005/4/25 4:50 Tell a friend
3457 0 0.00 (0 votes)
|
| My Ute (5)
Rogue Misc 2005/4/24 2:37 Tell a friend
2295 0 0.00 (0 votes)
|
| My Ute (4)
Rogue Misc 2005/4/24 2:35 Tell a friend
2575 0 0.00 (0 votes)
| Holley,Supercharger and plumbing. |
|
| My Ute (3)
Rogue Misc 2005/4/24 2:32 Tell a friend
2194 0 0.00 (0 votes)
|
| My Ute (2)
Rogue Misc 2005/4/24 2:30 Tell a friend
2020 0 0.00 (0 votes)
| Didn`t want to cut a hole but I needed the cold air. Took me 2 days to bring myself to the jigsaw! |
|
| My Ute (1)
Rogue Misc 2005/4/24 2:27 Tell a friend
2036 0 0.00 (0 votes)
|
| clutch totally bummed out on me
Mr_Turbo Mr_Turbo 2005/4/24 1:54 Tell a friend
2254 0 0.00 (0 votes)
um clutch wouldnt disengage so she had to get towed 45mins to get home damn it!
i noticed it like 3 mins up the road but im like hmm if i can just fluke it to work ill get $200 and if i dont go to work ill be down $200 plus the money needed to fix it so drove to work noing i had to get it towed $80 to tow it home on dads car with a hire trailer.. so not happy |
|
| door trims
NIS15L Misc 2005/4/23 15:10 Tell a friend
1782 0 0.00 (0 votes)
| i was unsured how they would turn out happy they turned out good |
|
| door trims
NIS15L Misc 2005/4/23 15:06 Tell a friend
1951 1 0.00 (0 votes)
| just need new winders and to paint colum |
|
| interior complete
NIS15L Misc 2005/4/23 15:03 Tell a friend
1899 0 0.00 (0 votes)
|
| Engine Pic
RMSPOWER Misc 2005/4/23 6:20 Tell a friend
2492 6 0.00 (0 votes)
| This is the left side of my Datsy A15 engine, notice her fancy home made air intake system. It may look funny, but it gave Datsy much more performance. |
|
| Engine Pic
RMSPOWER Misc 2005/4/23 6:17 Tell a friend
2242 0 0.00 (0 votes)
| This is the right side view of my Datsy A15 engine. |
|
| Engine Pic
RMSPOWER Misc 2005/4/23 6:15 Tell a friend
1994 1 0.00 (0 votes)
| This is the front view of my Datsy A15 engine |
|
| My 1972 Datsun 1200 Sedan
works1200 Misc 2005/4/23 2:57 Tell a friend
2065 0 0.00 (0 votes)
|
| My 1972 Datsun 1200 Sedan
works1200 Misc 2005/4/23 2:55 Tell a friend
2420 6 0.00 (0 votes)
| I just got done primering it Olive drab. Original chrome and stainless. Converted from auto to manual. Runs great! |
|
| Bakkie "burnout" #1
supervan Misc 2005/4/21 13:19 Tell a friend
2999 3 0.00 (0 votes)
| Nissan UTE fitted with Toyota powerplant- Ouch! |
|
| boofheads 2 door 1000
boofhead Misc 2005/4/21 11:48 Tell a friend
2631 6 0.00 (0 votes)
| the start of my car modifying life :) |
|
| SA record for highest wheelie!
supervan Drag 2005/4/21 11:14 Tell a friend
6103 2  5.50 (2 votes)
| Old photo of Louis Lima's nissan bakkie doing a record high wheelie - sorry for the quality, taken from a videoclip found on www.nitrousandturbo.co.za |
|
| 78 ute original seat packing
datto1200ute_qld Misc 2005/4/21 10:53 Tell a friend
1832 0 0.00 (0 votes)
| incase any one wonders why the original seats are so uncomfortable its cause the packing looks, feels and is as comfortable as a door mat. |
|
| 78 ute seat base re-trim
datto1200ute_qld Misc 2005/4/21 10:50 Tell a friend
1986 0 0.00 (0 votes)
| how the seats will look when finished |
|
| dash shot
datto1200ute_qld Misc 2005/4/21 10:47 Tell a friend
1914 0 0.00 (0 votes)
| sorry bout the quality but its off my phone innight mode as the shop was very dark |
|
| 78 ute dash colour change
datto1200ute_qld Misc 2005/4/21 10:44 Tell a friend
1977 0 0.00 (0 votes)
| low quality pic of new door trim, carpet and dash clour change from original brown to black will post more tomorrow when i pick up from trimmer |
|
| B140
supervan Body and Interiors 2005/4/21 10:44 Tell a friend
5716 19 0.00 (0 votes)
| B140 from SA with toyota 4AGZE 1600 turbo engine being swoped with CA18DET engine and gearbox, running a T3/T4 hybrid turbo - soon to be finished...watch this space |
|
| LAST PIC
dato_powa Misc 2005/4/20 19:40 Tell a friend
1816 3 0.00 (0 votes)
| ENJOY YALL IT STILL RUNS LOL |
|
| another view
dato_powa Misc 2005/4/20 19:37 Tell a friend
1953 0 0.00 (0 votes)
|
| more views
dato_powa Misc 2005/4/20 19:33 Tell a friend
1691 0 0.00 (0 votes)
|
| mor of da beast
dato_powa Misc 2005/4/20 19:23 Tell a friend
1731 0 0.00 (0 votes)
|
| da beast lol
dato_powa Misc 2005/4/20 19:13 Tell a friend
1838 3 0.00 (0 votes)
|
| da beast lol
dato_powa Misc 2005/4/20 18:59 Tell a friend
1746 0 0.00 (0 votes)
|
| Reconditioned 1000 Taillights
TnPshow Misc 2005/4/20 12:39 Tell a friend
2509 3 0.00 (0 votes)
| Finally got somewhere with my taillights. No-one had any good surrounds they were willing to part with, so I had mine fixed and re-chromed. Worked a treat! The finished pair cost me $50!!! |
|
| drag day
boofhead Misc 2005/4/20 11:48 Tell a friend
2397 5 0.00 (0 votes)
| ndsoc annual drag day at heathcote |
|
| CA-18 2 Dr
TnPshow Misc 2005/4/20 9:09 Tell a friend
2383 10 0.00 (0 votes)
This belongs to a mate of mine - CA-18 Turbo powered.
Only driven to church on Sundays (Big carpark for dougheys) |
|
| Dat12a
DAT12A Drag 2005/4/20 7:32 Tell a friend
3803 0 0.00 (0 votes)
|
| Dat12a
DAT12A Drag 2005/4/20 7:31 Tell a friend
3743 0 10.00 (1 vote)
|
| Cheviot Mags For Sale
Coops Members 2005/4/19 23:10 Tell a friend
3339 2 0.00 (0 votes)
| 2 tyres 85%, 2 tyres 15%. The lot $150 |
|
| 1600 front
shoom Track 2005/4/19 18:08 Tell a friend
2862 0 0.00 (0 votes)
| Mt Ommaney Hillclimb WA 16/4/05 .. lovely bananabending datto in the works colours! |
|
| 1600 rear
shoom Track 2005/4/19 18:02 Tell a friend
2944 0 0.00 (0 votes)
| Taken at Mt Ommaney Hillclimb in Northam WA on 16th April 2005. Apart from a couple of chevy V8 powered 240Zs this was the only Datto showing. |
|
| Bakkie "burnout" #2
supervan Misc 2005/4/19 15:36 Tell a friend
4195 7 0.00 (0 votes)
| After the fire had been put out! |
|
| 1200 coupe`s power plant
vixen Forum 2005/4/19 14:11 Tell a friend
2496 2 0.00 (0 votes)
| vixen&sly old fox`s daughters per plant.2002 shame she sold car in 2004. |
|
| 1200`s power plant
vixen Misc 2005/4/19 13:28 Tell a friend
2191 0 0.00 (0 votes)
| vixen&sly old fox`s duaghters power plant,blueprinted,mild cam,12:1 comp,2x40 delortos.top speed needle was off the dial |
|
| 1200 coupe
vixen Misc 2005/4/19 13:17 Tell a friend
2260 0 0.00 (0 votes)
| was a damm nice car but she sold it 2004 |
|
| 1200coupe
vixen Misc 2005/4/19 13:14 Tell a friend
2040 0 0.00 (0 votes)
| sly old fox is good to his daughter (he paid for every thing and built it ) |
|
| 1200 coupe
vixen Misc 2005/4/19 12:58 Tell a friend
2271 0 0.00 (0 votes)
| vixens daughters mean coupe back in 2002 |
|
| Centeral locking
chris1200t Misc 2005/4/18 14:29 Tell a friend
12928 10 0.00 (0 votes)
| Heres the centeral locking kit im gonna try to install in my Datsun 1200 coupe. i no there are 4 motors so ill just use 2. |
|
| What's this sitting in my engine bay???
who_your_datty_1200 who_your_datty_1200 2005/4/18 11:50 Tell a friend
5032 20 0.00 (0 votes)
|
| 1200RC's beast front angled shot
1200rallycar 1200rallycar 2005/4/18 11:26 Tell a friend
4703 12 0.00 (0 votes)
white rims, colour-coded quarters, re-spayed flares, she's starting to come up nice
still dying for a complete respray though it came up nice in the photos |
|
| ooops i suck at editing photos
1200rallycar 1200rallycar 2005/4/18 11:18 Tell a friend
2974 0 0.00 (0 votes)
|
| 1200RC's beast running white rims!
1200rallycar 1200rallycar 2005/4/18 11:18 Tell a friend
4088 9 10.00 (1 vote)
mmm, i love em
that and colour-coded front quarters has really improved the look again |
|
| old'n new
boofhead Wheels 2005/4/18 11:03 Tell a friend
3010 6 0.00 (0 votes)
| newly powder coated wheels. |
|
| HR30 GT ES project
L18_B110 L18_B110 2005/4/18 10:20 Tell a friend
2576 5 0.00 (0 votes)
I know its not even close to a 1200, but this is what has been distracting me from getting the 1200 up and running...
It's a progress pic - I had some problems with my very old spray gun while painting the colour on, so had to give it a quick rub down before the clear coats. its getting there... |
|
| Fuel Line 2
who_your_datty_1200 who_your_datty_1200 2005/4/18 7:50 Tell a friend
2214 0 0.00 (0 votes)
| Put The fuel line in today |
|
| Fuel Line 1
who_your_datty_1200 who_your_datty_1200 2005/4/18 7:48 Tell a friend
2016 0 0.00 (0 votes)
| Put The fuel line in today for the EFI. |
|
| 07. Exhaust valves
SLAM1024 SLAM1024 2005/4/18 3:24 Tell a friend
2196 2 0.00 (0 votes)
| I was wondering about these when I saw them, I thought that it had probably been ran lean/hot, sent the picture to my dad to confirm it, told me to find out how well the valve seats by pouring gas down there and see how fast it leaks through, I'll try that but gas is so expensive to waste nowadays :P |
|
| 06. Floor rust
SLAM1024 SLAM1024 2005/4/18 3:19 Tell a friend
2111 1 0.00 (0 votes)
| here you can see the floorpan rust hole, its the bad one on the car, the rest of the rust isnt this bad. You can see the Gearbox there also, I was suprised how light they are! |
|
| 05. Engine bay
SLAM1024 SLAM1024 2005/4/18 3:17 Tell a friend
1907 0 0.00 (0 votes)
| Looks good, ready for pressure wash |
|
| 04. Its out!
SLAM1024 SLAM1024 2005/4/18 3:15 Tell a friend
4698 0 0.00 (0 votes)
| Nice A12, basically pulled it all out myself with no engine crane, (just borrowed a friend to lift it out at the end) |
|
| Ready for rego
NIS15L Misc 2005/4/17 12:51 Tell a friend
1983 0 0.00 (0 votes)
| Also wont be NIS15L for to much longer. |
|
| NIS15L back together
NIS15L Misc 2005/4/17 12:41 Tell a friend
1952 0 0.00 (0 votes)
| Just have to go pick up another grill interior is done just preparing the car for engineering now gave it a full detail today. |
|
| Dang tree
Dodgeman Misc 2005/4/17 11:41 Tell a friend
2321 6 0.00 (0 votes)
| They make the roof leak & the bonnet hard to open |
|
| datto buggy
rb20 Misc 2005/4/17 11:05 Tell a friend
2111 4 0.00 (0 votes)
| it has a realy tight j15 its a shame a tree fell on its roof |
|
| a bit wide
rb20 Misc 2005/4/17 11:03 Tell a friend
2256 5 0.00 (0 votes)
| i think i need a bit of flaring here |
|
| filling it up
rb20 Misc 2005/4/17 11:01 Tell a friend
2178 0 0.00 (0 votes)
| this engine is temporery while i build the a14 |
|
| what colour rims
rb20 Misc 2005/4/17 10:57 Tell a friend
2404 5 0.00 (0 votes)
|
| nearly there
rb20 Misc 2005/4/17 10:55 Tell a friend
2011 0 0.00 (0 votes)
| and i still havent driven a b110 yet |
|
| After a re-spray
datrat_dave Misc 2005/4/17 8:09 Tell a friend
3358 0 0.00 (0 votes)
The blocks done in Ford Blue as do most people as the Datsun Blue is no longer around!! :(
I reckon it came up fairly well and looks good with the brass plugs aswell.. |
|
| Back from the shop...
datrat_dave Misc 2005/4/17 8:05 Tell a friend
2026 0 0.00 (0 votes)
|
| Back from the shop...
datrat_dave Misc 2005/4/17 8:03 Tell a friend
2591 1 0.00 (0 votes)
oooooohhh its all new and stuff :P
Those bores were soo smooth and done very niceley, anyone from thinking of any engine work i recommend Merv Gray highly (on invermay rd)
Both the honing and bore job were done succsefully even tho they said it may not have as the engine had done 360 000k's !!
All tubbed, new whelch plugs and protected with that no rust stuff, had to get it off before any more progression, lots of scrubbing!! |
|
| Heart Transplant!
datrat_dave Misc 2005/4/17 7:52 Tell a friend
2000 0 0.00 (0 votes)
This is a while back now, just finally got the touch of how to post photos! This is the old tired A15 being removed to go and have a 'freshen' up...
Thats me on the left and Nato (a mate) helping out on tha right...Hes currently restoring his LX (Genuine SS) Torana hatch, going to have supercharged V6 out of a VS? i think.. |
|
| On Guard
Dodgeman Misc 2005/4/17 4:22 Tell a friend
2577 3 0.00 (0 votes)
| The lip has been carefully rolled & filled with sealant. The whole inside will also be covered with sound deadener. |
|
| All better now
Dodgeman Misc 2005/4/16 19:13 Tell a friend
2105 4 0.00 (0 votes)
| This is the area that was accident damaged when i bought the car. |
|
| Progress. Another perspective.
Dodgeman Misc 2005/4/16 19:13 Tell a friend
2395 5 0.00 (0 votes)
| Another angle. The repair should be undetectable when finished. Thanks again B310GX |
|
