| Dragongoose Sunny Coupe SR20-det
 Dragongoose  Members  2003/3/25 3:42  Tell a friend
 3499  3  0.00 (0 votes)
| this is the Stanza Diff its the H165 same as the Series 1 and 2 Bluebirds and 1200 Ute |
|
| Dragongoose Sunny Coupe SR20-det
Dragongoose Members 2003/3/25 3:40 Tell a friend
2525 0 0.00 (0 votes)
| This should give you an idea as to how low I placed the engine,,,,theres less than 5mm space between the cross member and the sump...very tight lowers the centre of gravity for handling and as far back as I can. |
|
| Dragongoose Sunny Coupe SR20-det
Dragongoose Members 2003/3/25 3:39 Tell a friend
2372 0 0.00 (0 votes)
| This should give you an idea as to how low I placed the engine,,,,theres less than 5mm space between the cross member and the sump...very tight lowers the centre of gravity for handling and as far back as I can. |
|
| Dragongoose Sunny Coupe SR20-det
Dragongoose Members 2003/3/25 3:34 Tell a friend
2471 0 0.00 (0 votes)
|
| Dragongoose Sunny Coupe SR20-det
Dragongoose Members 2003/3/25 3:31 Tell a friend
2494 0 0.00 (0 votes)
|
| Dragongoose Sunny Coupe SR20-det
Dragongoose Members 2003/3/25 3:26 Tell a friend
2485 0 0.00 (0 votes)
|
| my car is fucked
bent_axel_bob bent_axel_bob 2003/3/24 7:48 Tell a friend
3656 10 0.00 (0 votes)
|
| oops
bent_axel_bob bent_axel_bob 2003/3/24 7:42 Tell a friend
2828 0 0.00 (0 votes)
|
| L series firewall clearance
L18_B110 L18_B110 2003/3/24 7:28 Tell a friend
3341 2 0.00 (0 votes)
| minor reshaping required where the firewall meets the trans tunnel. Also shows clutch master cylinder location. the adjacent brake splitter block was simply spaced out from the firwall to clear the clutch master cyl. |
|
| x-member mod L18
L18_B110 L18_B110 2003/3/24 7:22 Tell a friend
3781 3 0.00 (0 votes)
| sectioned the hoop and moved rearwards to mount the engine as low and rearward as possible. you could probably modify the sump for clearance instead. |
|
| x-member mod for L18
L18_B110 L18_B110 2003/3/24 7:18 Tell a friend
3726 2 0.00 (0 votes)
Stanza mount/saddle on 1200 x-member. Oil and grease are optional, as is the crappy wiring...
L18_B110 |
|
| Dragongoose Sunny Coupe SR20-DET
Dragongoose Members 2003/3/24 2:08 Tell a friend
2565 2 0.00 (0 votes)
| Pictures of my car as requested |
|
| Dragongoose Sunny Coupe SR20-DET
Dragongoose Members 2003/3/24 2:00 Tell a friend
2880 5 0.00 (0 votes)
| Pictures of my car as requested |
|
| Dragongoose Sunny Coupe SR20-DET
Dragongoose Members 2003/3/24 1:54 Tell a friend
2734 0 0.00 (0 votes)
| Pictures of my car as requested |
|
| Dragongoose Sunny Coupe SR20-DET
Dragongoose Members 2003/3/24 1:52 Tell a friend
2591 1 0.00 (0 votes)
| Pictures of my car as requested |
|
| Dragongoose Sunny Coupe SR20-DET
Dragongoose Members 2003/3/24 1:51 Tell a friend
2815 0 0.00 (0 votes)
| Pictures of my car as requested |
|
| Singapore Advan 1200 engine
L18_B110 Racing 2003/3/24 1:26 Tell a friend
8564 9 0.00 (0 votes)
this is Brian's engine.
one of the original works Yokohama/ Enkei race cars.
Still completely original with Enkei slide throttle body and Kugelfischer injection pump.
|
|
| Singapore Advan 1200
L18_B110 Racing 2003/3/24 1:24 Tell a friend
5735 3 0.00 (0 votes)
Matt from DatsunSoul forwarded these pics to me a while ago. Brian in Singapore owns this beauty. This is from his email:
"My pride and joy is one of the original works Yokohama/ Enkei race cars.
Still completely original with Enkei slide throttle body and Kugelfischer injection pump.
Almost completely restored.
Any help tracing history and background will be appreciated."
It would be my pride and joy too. Anyone have any history of the car for him?
L18_B110 |
|
| L18's engine bay
L18_B110 L18_B110 2003/3/23 23:46 Tell a friend
6732 18 0.00 (0 votes)
finally got a current pic of my engine bay.
L18_B110 |
|
| David and Goliath
L18_B110 Misc 2003/3/23 23:35 Tell a friend
3839 5 0.00 (0 votes)
| GT40 replica at Morgan Park. This time Goliath won... |
|
| fibreglass flares
nzdatman Forum 2003/3/22 5:01 Tell a friend
4769 0 0.00 (0 votes)
flares from F.A.R. in NZ. 75mm universal flare. they look a bit big as the wheels in the photo are only 6" wide. I changed to the ute diff too which is narrower than my old one. Could probably change now to 50 mm flares. If I did I would buy them from these guys, I think they are a good product. Forgive them not being tidily glassed on, my excuse is lack of time and I thought I'd probably break them sooner or later and screwed on they are easier to replace
|
|
| Bruce's Coupe
nzdatman Misc 2003/3/22 4:59 Tell a friend
4544 1  8.00 (3 votes)
| This tidy coupe belongs to my uncle. My cousin (his son) gave it a nice Glasurit paint job. We tell him it now needs a nice set of mags. |
|
| My old 1200 race car
SteveH Misc 2003/3/22 3:28 Tell a friend
4797 8 0.00 (0 votes)
| 4 & Rotary Nationals 2001 at Wakefield Park as a display car for Yokohama |
|
| My old 1200 Coupe
SteveH Misc 2003/3/22 3:26 Tell a friend
4345 1 0.00 (0 votes)
| 1200 race car with SR20DE. |
|
| My Old 1200 Coupe Race Car
SteveH Track 2003/3/22 3:24 Tell a friend
3873 17 0.00 (0 votes)
| This is my old 1200 race car. Unfortunately it never got properly finished & I had to sell itafter only a couple of drives. It had a SR20de with Quad Throttle Bodies, 12.5:1 Pistons, Autronic ECU etc. It was dyno'd at 237hp @ Flywheel & it still had to be run in & tuned properly. |
|
| EFI system for sale
B120dat Misc 2003/3/21 9:28 Tell a friend
5621 16 0.00 (0 votes)
| this is the dude in penrith selling this. |
|
| Weber DGV air filter adapter
ddgonzal Tech Section 2003/3/21 6:25 Tell a friend
12269 12 0.00 (0 votes)
|
| Twin Hitachi SU carbs
ddgonzal Engine 2003/3/21 4:55 Tell a friend
9628 2 0.00 (0 votes)
|
| Bruce's Coupe
nzdatman Members 2003/3/20 12:29 Tell a friend
3595 0 0.00 (0 votes)
| This tidy coupe belongs to my uncle. My cousin (his son) gave it a nice Glasurit paint job. We tell him it now needs a nice set of mags. |
|
| fibreglass flares
nzdatman Forum 2003/3/20 12:12 Tell a friend
3679 1 0.00 (0 votes)
| flares from F.A.R. in NZ. 75mm universal flare. they look a bit big as the wheels in the photo are only 6" wide. I changed to the ute diff too which is narrower than my old one. Could probably change now to 50 mm flares. If I did I would buy them from these guys, I think they are a good product. Forgive them not being tidily glassed on, my excuse is lack of time and I thought I'd probably break them sooner or later and screwed on they are easier to replace |
|
| A12 head bolt torque patterns
ddgonzal Tech Section 2003/3/19 19:53 Tell a friend
10653 0 0.00 (0 votes)
| this is from the Nissan A12 engine manual (see our Club's Downloads section) |
|
| A14 turbo 4
finn Engine 2003/3/19 18:19 Tell a friend
6237 5 0.00 (0 votes)
| Building A14 turbo engine |
|
| A14 turbo 3
finn Engine 2003/3/19 18:18 Tell a friend
5688 0 0.00 (0 votes)
| Building A14 turbo engine |
|
| A14 turbo 2
finn Engine 2003/3/19 18:17 Tell a friend
5960 3 0.00 (0 votes)
| Building A14 turbo engine |
|
| A14 turbo 1
finn Engine 2003/3/19 18:15 Tell a friend
7403 5 0.00 (0 votes)
| Building A14 turbo engine |
|
| Try again 2of3
BigBlue07 Members 2003/3/19 6:54 Tell a friend
3553 6 0.00 (0 votes)
| Old bumper, lowered by 2 inches, wait for new pic |
|
| Try again 1of3
BigBlue07 Members 2003/3/19 6:51 Tell a friend
4911 9 0.00 (0 votes)
|
| SR20 in da ute :)
B120dat Misc 2003/3/18 14:04 Tell a friend
5771 0  5.50 (2 votes)
| sweeet, it looks perfect in the 1200 :) (ute) |
|
| 3of3
BigBlue07 Members 2003/3/18 7:30 Tell a friend
3335 1  3.00 (1 vote)
|
| 2of3
BigBlue07 Members 2003/3/18 7:29 Tell a friend
3709 0 0.00 (0 votes)
|
| Some new paint
BigBlue07 Members 2003/3/18 7:28 Tell a friend
3984 0 0.00 (0 votes)
|
| Sunny Coupe in Japanese letters
ddgonzal Tech Section 2003/3/17 22:24 Tell a friend
4904 0 0.00 (0 votes)
|
| Wheel Offset and Backspace Diagram
ddgonzal Suspension 2003/3/17 19:22 Tell a friend
13620 8 0.00 (0 votes)
| Note that Front Wheel Drive wheels generally have more "positive" offset. |
|
| throttle linkage - side view
b310gx Tech Section 2003/3/16 7:03 Tell a friend
7383 3 0.00 (0 votes)
| the same from the side,so you can see how the throttle cable attahes to the shaft. |
|
| throttle linkage from other side
b310gx Tech Section 2003/3/15 12:03 Tell a friend
7680 1 0.00 (0 votes)
| another view of the linkage |
|
| throttle linkage on b310
b310gx Tech Section 2003/3/15 11:51 Tell a friend
8116 4 0.00 (0 votes)
| this is the throttle linkage made for me by a friend.this is about the 10th one he's made over the years. |
|
| Coupe @ Taupo NZ
Brent Track 2003/3/15 11:26 Tell a friend
2913 5  6.67 (3 votes)
|
| Brent's coupe
Brent Forum 2003/3/15 11:14 Tell a friend
3287 0 6.00 (2 votes)
| My car at the hair pin on Taupo circuit |
|
| Brent's coupe @ Taupo, NZ.
Brent Track 2003/3/15 10:56 Tell a friend
2819 0  10.00 (1 vote)
| This is me in my car going throught the hairpin at Taupo, NZ. |
|
| Red Coupe
B120dat Misc 2003/3/14 12:41 Tell a friend
4592 7 0.00 (0 votes)
| this coupe would match my ute :) i would like this in the garge next to the ute |
|
| Green ute
B120dat Misc 2003/3/14 12:40 Tell a friend
3327 1 0.00 (0 votes)
|
| hot green
B120dat Misc 2003/3/14 12:38 Tell a friend
4445 2 0.00 (0 votes)
| this ute rocks! carrying abit of weight :P |
|
| White ute
B120dat Misc 2003/3/14 12:36 Tell a friend
3179 0 0.00 (0 votes)
| i have seen this ute before i swear.... nice mags! |
|
| nice ute again
B120dat Misc 2003/3/14 12:33 Tell a friend
2997 2 0.00 (0 votes)
this is a wicked colour....
i forgot the .jpg |
|
| nice ute
B120dat Misc 2003/3/14 12:31 Tell a friend
3074 0 0.00 (0 votes)
| this ute has a wicked colour :P |
|
| QSSS Results Rd1 2003
L18_B110 Misc 2003/3/14 1:11 Tell a friend
4221 14 0.00 (0 votes)
top 20 cars from the 86 total entries at the first round or the QLD Super Sprint Series.
This will give you a bit of an idea of the cars that were there. For the overseas guys, a Formula Holden is an open wheel racecar based on F3000 chassis with a 340bhp V6 engine, weighs 675 kg, with 10" front and 14" rear slicks!!! The Axtel Suzuki is a Hillclimb Special open wheeler with a suzuki bike engine, wings and slicks. 2 people lift it onto it's trailer to give you an idea of its weight. The westfield clubmans were all running slicks as well - they are disgustingly fast. Fastest sedan on road race tyres was Derek Pingel in the SR20 turbo Escort.
Brendan Pingel in his 1200 is a big surprise to be that far up the results. On Saturday his best time from 4 runs was a 3:07 which equalled his best from last year, then on his 3 runs on Sunday he did a 3:05, 3:04 and 3:03! I reckon he might have thrown a set of slicks on it Sunday - you simply don't drop 4 seconds overnight... The Corvette that finished 12th outright was also running slicks. |
|
| Advan Sunny
stirlingmac Historic 2003/3/13 21:04 Tell a friend
10332 3  1.00 (2 votes)
| I would love this parked in my garage... |
|
| Edited Speedo
Lobster Lobster 2003/3/13 12:08 Tell a friend
3596 10 0.00 (0 votes)
It's still gotta be smoothed up. But I think it's pretty much there. Just gotta fix the erasure lines...
And a general tidy up... |
|
| injection
1200rallycar 1200rallycar 2003/3/13 10:10 Tell a friend
6356 35 0.00 (0 votes)
|
| Dragongoose Sunny Coupe SR20-DET
Dragongoose Members 2003/3/13 4:19 Tell a friend
3446 7 0.00 (0 votes)
|
| Dragongoose Sunny Coupe SR20-DET
Dragongoose Members 2003/3/13 4:10 Tell a friend
2646 4 0.00 (0 votes)
| Datsun's office the gearstick is reversed...as in taken out of the socket and turned 180 deg...better clearance from the handbrake and better forward than back as my elbow was hitting the seat when I shift to second and fourth |
|
| Dragongoose Sunny Coupe SR20-DET
Dragongoose Members 2003/3/13 4:09 Tell a friend
2531 0 0.00 (0 votes)
| Datsun's office the gearstick is reversed...as in taken out of the socket and turned 180 deg...better clearance from the handbrake and better forward than back as my elbow was hitting the seat when I shift to second and fourth |
|
| Dragongoose Sunny Coupe SR20-DET
Dragongoose Members 2003/3/13 4:02 Tell a friend
2566 2 0.00 (0 votes)
| for the sake of cold air indution I had the AFM put there but the electric fan for the radiator sucked air back out of the airflow meter so I put a cardboard barrier to stop this and idles nicely now |
|
| Dragongoose Sunny Coupe SR20-DET
Dragongoose Members 2003/3/13 3:59 Tell a friend
2552 0 0.00 (0 votes)
| The battery is still in the same spot but eventually it will be relocated to the hatch area for better weight distribution. I had to change the clutch from cable to hydraulic,,,hard as it didn't have provisions for a clutch master like the 120Y but its was simple enough. |
|
| Dragongoose Sunny Coupe SR20-DET
Dragongoose Members 2003/3/13 3:54 Tell a friend
2536 0 0.00 (0 votes)
| Temporarily I will have the cross over pipe, I have a Liberty water/air incooler to sit in the space between the strut tower and the radiator support. |
|
| Dragongoose Sunny Coupe SR20-DET
Dragongoose Members 2003/3/13 3:49 Tell a friend
2986 0 0.00 (0 votes)
SR20-DET installed into a Datsun Sunny Coupe
I did this myself. The install is complete but the rust repairs need to be done. |
|
| Dragongoose Sunny Coupe SR20-DET
Dragongoose Members 2003/3/13 3:45 Tell a friend
2537 0 0.00 (0 votes)
SR20-DET installed into a Datsun Sunny Coupe
I did this myself. The install is complete but the rust repairs need to be done. |
|
| 4 link rear end
stirlingmac Suspension 2003/3/13 1:52 Tell a friend
10515 6 0.00 (0 votes)
| This is the rear of my long term racecar project. The radius rods are hi tensile aluminium. Everything in the car I fabricated myself including the coilovers and the stainless exhaust. The rear crossmember has a bulkhead and all of this is visible thru the rear window. |
|
| A-series Turbo system
ddgonzal Engine 2003/3/12 7:47 Tell a friend
9585 14 0.00 (0 votes)
| This is a "production" setup from a forklift. The turbo is an "EP71". |
|
| back view
B120dat Misc 2003/3/11 9:14 Tell a friend
3213 5 0.00 (0 votes)
|
| mags 4 sale!
B120dat Misc 2003/3/11 9:12 Tell a friend
3205 1 0.00 (0 votes)
|
| mates A15
B120dat Misc 2003/3/11 9:09 Tell a friend
3924 5 0.00 (0 votes)
| this has rusty extractors, standard hitachi, but its beats mine by half car length up to 70km :( |
|
| ute 2
B120dat Misc 2003/3/11 9:07 Tell a friend
3071 0 0.00 (0 votes)
|
| inside ute
B120dat Misc 2003/3/11 9:06 Tell a friend
3619 8 0.00 (0 votes)
| this is the inside with the 70 style speedo |
|
| mates ute
B120dat Misc 2003/3/11 9:04 Tell a friend
3366 4  4.00 (2 votes)
| mate finally got rid of his Commmmondore! he saw the light and got the datto :P |
|
| my car
rx2capella Members 2003/3/11 7:14 Tell a friend
2691 0 0.00 (0 votes)
My motor (also not computer done)
Nissan FJ20de
pulsar radiator
Custom 6.5l sump w/baffle & Engine mounts
fj20 gearbox |
|
| my car
rx2capella Members 2003/3/11 7:04 Tell a friend
2621 1 0.00 (0 votes)
| MY car again the only thing i done on computer is blur the number plates. |
|
| my car
rx2capella Members 2003/3/11 6:57 Tell a friend
2600 1 0.00 (0 votes)
| My car with out being played with on the computer. |
|
| A mates car
rx2capella Members 2003/3/11 6:36 Tell a friend
3476 7 0.00 (0 votes)
| Nice straight 1200 coupe hey. |
|
| OH Yes ....
stirlingmac Drag 2003/3/10 10:17 Tell a friend
6240 16 0.00 (0 votes)
| BEn Cox I think ripping it up at the 4s and Rotary Nats in NZ..2003 |
|
| More paint samples
stirlingmac Misc 2003/3/10 9:40 Tell a friend
5048 3 0.00 (0 votes)
| These colours were offered for the JDM GLs and DLs. I have never seen a 1200 with the tan interior in NZ. The cloth insert seats wouls have been a good idea in Aussie, nothing like a seat burn in shorts .... |
|
| Paint samples
stirlingmac Misc 2003/3/10 9:30 Tell a friend
7221 7 0.00 (0 votes)
| Heres most of the colours available with names...outside of Japan they were just refered to as red etc these names are for the JDM Sunny models. |
|
| My new car 3
tens_and_twenties Body and Interiors 2003/3/9 19:15 Tell a friend
5114 3 0.00 (0 votes)
| Stock interior, surprisingly in good shape. The dash is spotless and perfect, and the seats are decent too. |
|
| My new car 2
tens_and_twenties Engine 2003/3/9 19:12 Tell a friend
5888 10 0.00 (0 votes)
| Engine shot, stock L16 top to bottom. |
|
| My new car 1
tens_and_twenties Body and Interiors 2003/3/9 19:10 Tell a friend
4905 6 10.00 (1 vote)
| This is one I just brought home (thanks to dimlight for the tow). It's a 1972 model, L16 auto, totally bone stock and definitely staying that way. |
|
| My new car
tens_and_twenties Body and Interiors 2003/3/9 19:07 Tell a friend
4645 0 0.00 (0 votes)
| This is one I just brought home (thanks to dimlight for the tow). It's a 1972 model, L16 auto, totally bone stock and definitely staying that way. |
|
| Dragongoose Datsun Sunny Coupe SR20 Turbo
Dragongoose Members 2003/3/9 15:46 Tell a friend
3572 1 0.00 (0 votes)
The SR20-DET from a 180SX which I installed myself
The handbrake handle has been shortened. But now I didn't have to as I turned the lever 180 deg. I am buying new handbrake lever now for ease of operation. |
|
| Dragongoose Datsun Sunny Coupe SR20 Turbo
Dragongoose Members 2003/3/9 15:44 Tell a friend
2960 0 0.00 (0 votes)
The SR20-DET from a 180SX which I installed myself
The shifter is much further back I took the shifter out of the housing, turned it 180 deg so the shifter angle is forward. So it clears the handbrake and feels better without my elbow hitting the seat |
|
| Dragongoose Datsun Sunny Coupe SR20 Turbo
Dragongoose Members 2003/3/9 15:41 Tell a friend
3739 6 0.00 (0 votes)
| The SR20-DET from a 180SX which I installed myself |
|
| Dragongoose Datsun Sunny Coupe SR20 Turbo
Dragongoose Members 2003/3/9 15:40 Tell a friend
3194 0 0.00 (0 votes)
| The SR20-DET from a 180SX which I installed myself |
|
| Dragongoose Datsun Sunny Coupe SR20 Turbo
Dragongoose Members 2003/3/9 15:39 Tell a friend
3388 0 0.00 (0 votes)
| The SR20-DET from a 180SX which I installed myself |
|
| Dragongoose Datsun Sunny Coupe SR20 Turbo
Dragongoose Members 2003/3/9 15:36 Tell a friend
3737 3 1.00 (1 vote)
| The SR20-DET from a 180SX which I installed myself |
|
| B10 club...
muke Docs 2003/3/8 13:50 Tell a friend
11927 11  8.33 (3 votes)
found it on some asian B10 club or sumthink...
thought i'd post it 4 all you 1000 fans...
like me self...its recent too... |
|
| 1000 turbo
dattoman_1000 Engine 2003/3/8 8:16 Tell a friend
12163 0 0.00 (0 votes)
| For engine bay comparison against 1200 |
|
| 1200 supercharged
dattoman_1000 Engine 2003/3/8 8:15 Tell a friend
9503 2 10.00 (2 votes)
| For comparison against the 1000 engine bay. |
|
| dimlight's Z20E engine swap 5
tens_and_twenties Engine 2003/3/7 5:16 Tell a friend
4976 3 0.00 (0 votes)
| Here's the shift linkage. He basically removed the right side of the tunnel to get it to fit. Once it's running we'll rebuld the floor, but the tranny didn't even come close to fitting in the stock tunnel. He made his own linkage with adjustable heim joints to get it to work right. Shifts perfect, too. |
|
| dimlight's Z20E engine swap 4
tens_and_twenties Engine 2003/3/7 5:13 Tell a friend
6197 13 0.00 (0 votes)
|
| dimlight's Z20E engine swap 3
tens_and_twenties Engine 2003/3/7 5:10 Tell a friend
5126 5 0.00 (0 votes)
|
| dimlight's Z20E engine swap 2
tens_and_twenties Engine 2003/3/7 5:04 Tell a friend
4576 0 0.00 (0 votes)
| Here's the exhaust manifold. Seems to clear the steering gearbox just fine. |
|
| dimlight's Z20E engine swap 1
tens_and_twenties Engine 2003/3/7 5:01 Tell a friend
5182 2 0.00 (0 votes)
| (2nd try) Some photos of dimlight65's Z20E engine swap. Here's the EFI intake we'll be using. |
|
